STMicroelectronics STM32Cube Alailowaya Industrial Node SensorTile Box
Hardware ati Software ti pariview
Hardware Loriview
- SampAwọn imuse le wa fun:
- STEVAL-STWINBX1 STWIN.box – SensorTile Alailowaya Alailowaya Apo Idagbasoke Ile ise
- STEVAL-MKBOXPRO SensorTile.box-Pro awọn sensọ-pupọ ati ohun elo idagbasoke asopọ alailowaya fun eyikeyi oju IoT oye
- STEVAL-STWINKT1B STWIN – SensorTile Alailowaya Alailowaya Apo Idagbasoke Ile ise
Hardware Loriview (2/2)
- STWIN.box – SensorTile Alailowaya ise ipade
- STWIN.box (STEVAL-STWINBX1) jẹ ohun elo idagbasoke ati apẹrẹ itọkasi ti o jẹ ki iṣapẹẹrẹ jẹ irọrun ati idanwo awọn ohun elo imọ-ẹrọ ile-iṣẹ ilọsiwaju ni awọn ipo IoT gẹgẹbi ibojuwo ipo ati itọju asọtẹlẹ.
- O jẹ itankalẹ ti ohun elo STWIN atilẹba (STEVAL-STWINKT1B) ati pe o ṣe ẹya iṣedede ẹrọ ti o ga julọ ni wiwọn ti awọn gbigbọn, agbara ti o ni ilọsiwaju, BoM imudojuiwọn lati ṣe afihan tuntun ati ti o dara julọ-ni-kilasi MCU ati awọn sensọ ile-iṣẹ, ati irọrun-si-lilo ni wiwo fun awọn afikun ita.
- Ohun elo STWIN.box ni eto ipilẹ STWIN.box, batiri LiPo 480mAh kan, ohun ti nmu badọgba fun ST-LINK debugger (STEVAL-MKIGIBV4), ọran ṣiṣu kan, igbimọ ohun ti nmu badọgba fun awọn sensọ DIL 24 ati okun to rọ.
Key Awọn ẹya ara ẹrọ
- Syeed alailowaya ti o ni oye pupọ fun ibojuwo gbigbọn ati wiwa olutirasandi
- Ti a ṣe ni ayika igbimọ eto ipilẹ STWIN.box pẹlu sisẹ, imọ-jinlẹ, asopọ, ati awọn agbara imugboroja
- Agbara kekere Arm® Cortex®-M33 pẹlu FPU ati TrustZone ni 160 MHz, 2048 kBytes Flash iranti (STM32U585AI)
- MicroSD kaadi Iho fun standalone data gedu awọn ohun elo
- Lori-ọkọ Bluetooth® agbara kekere v5.0 ọna ẹrọ alailowaya (BlueNRG-M2), Wi-Fi (EMW3080) ati NFC (ST25DV04K)
- Awọn sensọ IoT ti ile-iṣẹ lọpọlọpọ: bandiwidi jakejado (to 6 kHz), ariwo kekere, sensọ gbigbọn oni-nọmba 3-axis (IIS3DWB), 3D accelerometer + 3D gyro iNEMO inertial wiwọn wiwọn (ISM330DHCX) pẹlu Core Learning Machine, Awọn ohun elo ile-iṣẹ ccelero-low giga-giga (IIS3DLPC), Ultra-kekere agbara 2-axis magnetometer (IIS3MDC), Iwọn kikun-meji, igi 2 ati igi 1.26, barometer ti o wu oni-nọmba pipe ni package-kikun (ILPS4QS), Low-voltage, ultra-kekere agbara, 0.5°C išedede I²C/SMBus 3.0 sensọ otutu (STTS22H), gbohungbohun MEMS oni nọmba ile-iṣẹ (IMP34DT05), gbohungbohun MEMS Analog pẹlu esi igbohunsafẹfẹ to 80 kHz (IMP23ABSU)
- Expandable nipasẹ kan 34-pin FPC asopo
- Alaye tuntun ti o wa ni www.st.com/stwinbx1
Hardware Loriview (2/2)
- Ohun elo idagbasoke STEVAL-STWINBX1 pẹlu:
- Eto mojuto STEVAL-STWBXCS1 STWIN.box (ọkọ akọkọ)
- A ṣiṣu nla pẹlu M3 boluti
- A 480 mAh 3.7 V LiPo batiri
- Ohun ti nmu badọgba STEVAL-MKIGIBV4 ST-LINK pẹlu okun siseto
- Igbimọ ohun ti nmu badọgba STEVAL-C34DIL24 fun awọn sensọ DIL24 pẹlu okun rọ STEVAL-FLTCB01.
- Hardware Loriview (1/2)
SensorTile.box-Pro – awọn sensọ-pupọ ati ohun elo idagbasoke asopọ alailowaya fun eyikeyi oju-ọna IoT ti oye.
- SensorTile.box-Pro (STEVAL-MKBOXPRO) jẹ ohun elo apoti alailowaya ti o ṣetan lati lo fun idagbasoke eyikeyi ohun elo IoT ti o da lori ikojọpọ data latọna jijin ati igbelewọn, lo nilokulo ohun elo kikun nipasẹ gbigbe mejeeji išipopada ati imọ data ayika, pẹlu gbohungbohun oni-nọmba kan, ati mu asopọ pọ si ati ijafafa ti agbegbe eyikeyi ti o rii ararẹ.
- Ohun elo SensorTile.box-Pro ni eto mojuto SensorTile.box-Pro, batiri LiPo 480mAh kan, ohun ti nmu badọgba fun ST-LINK debugger (STEVAL-MKIGIBV4), ọran ṣiṣu kan, awọn amọna QVAR, Circuit gbigba ṣaja Alailowaya ati okun to rọ.
Key Awọn ẹya ara ẹrọ
- Agbara kekere-kekere pẹlu FPU Arm-Cortex-M33 pẹlu TrustZone® microcontroller (STM32U585AI)
- Awọn sensosi pipe to gaju lati ṣajọ data didara-giga: kekere-voltage sensọ otutu oni nọmba agbegbe (STTS22H), ẹyọ wiwọn inertial mẹfa-apa (LSM6DSV16X), accelerometer agbara kekere-ipa mẹta (LIS2DU12), 3-axis magnetometer (LIS2MDL), sensọ titẹ (LPS22DF) ati gbohungbohun oni-nọmba / sensọ ohun (MP23DB01HP)
- Yipada agbara HW, Awọn LED ipo eleto 4 (alawọ ewe, pupa, osan, buluu), awọn bọtini titari eto 2, buzzer ohun – Bọtini atunto, qvar pẹlu awọn amọna fun iriri wiwo olumulo
- Ni wiwo fun J-Link/SWD debug-probe, Ni wiwo fun ọkọ itẹsiwaju ati iho fun DIL24 sensọ alamuuṣẹ
- Asopọmọra: Iho kaadi microSD, Bluetooth® Low Energy 5.2 (BlueNRG 355AC), NFC tag (ST25DV04K)
- Agbara ati awọn aṣayan gbigba agbara: USB Iru-C® gbigba agbara ati sisopọ, gbigba agbara alailowaya 5 W ati batiri 480 mAh
- Alaye tuntun ti o wa ni www. https://www.st.com/en/evaluation-tools/stevalmkboxpro.html
Hardware Loriview (2/2)
- Ohun elo idagbasoke STEVAL-MKBOXPRO pẹlu:
- SensorTile.Box Pro ( igbimọ akọkọ)
- kan ike nla pẹlu M2.5 skru
- 480 mAh 3.7 V LiPo batiri
- Qvar amọna
- Ailokun saja olugba Circuit
- NFC siseto tag
- microSD kaadi
- Ohun ti nmu badọgba STEVAL-MKIGIBV4 STLINK pẹlu okun siseto
Software pariview
- FP-SNS-STAIOTCFT Software Apejuwe
- FP-SNS-STAIOTCFT jẹ Apo Iṣẹ Iṣẹ STM32Cube ti a ṣe lati lo papọ pẹlu Web ohun elo ST AIoT Craft.
- Idi ti idii iṣẹ-ṣiṣe yii ni lati pese awọn ohun elo ti o rọrun ti o fihan bi o ṣe le kọ awọn ohun elo aṣa fun STEVAL-MKBOXPRO, STEVAL-STWINBX1 ati awọn igbimọ STEVAL-STWINKT1B.
- Imugboroosi ti wa ni itumọ ti lori imọ-ẹrọ sọfitiwia STM32Cube lati ni irọrun gbigbe kọja awọn oriṣiriṣi STM32 microcontrollers.
Awọn ẹya ara ẹrọ bọtini
- Pari awọn ohun elo lori bi o ṣe le lo:
- Awọn algoridimu AI lori MCU, MLC ati ISPU
- Lilo ilana PnPL lati baraẹnisọrọ ati fifiranṣẹ awọn aṣẹ / awọn telemetries / awọn ohun-ini
- Lilo ibaraẹnisọrọ USB ni tẹlentẹle lati ṣe afihan awọn abajade itọkasi
- Lilọ nilokulo X-CUBE-MEMS1/ISPU ti o wa tẹlẹ lati dojukọ awọn sensọ oriṣiriṣi
- Lilo X-CUBE-AI lati gbe wọle nẹtiwọọki nkankikan ti o yan
- Irọrun gbigbe kọja awọn idile MCU oriṣiriṣi, o ṣeun si STM32Cube
- Ọfẹ, awọn ofin iwe-aṣẹ ore-olumulo.
- Alaye tuntun ti o wa ni www.st.com FP-SNS-STAIOTCFT
Eto & Ririnkiri Awọn ohun elo
Software ati Awọn ibeere miiran
FP-SNS-STAIOTCFT
Daakọ .zip naa file akoonu sinu folda kan lori PC rẹ. Apo naa yoo ni koodu orisun example (Keil, IAR, STM32Cube IDE) da lori STEVAL-STWINKT1B, STEVAL-STWINBX1 ati STEVAL-MKBOXPRO.
Eto Ipariview
HW prerequisites ati setup fun STEVAL-STWINKT1B
- 1x STEVAL-STWINKT1B igbelewọn ọkọ
- Kọǹpútà alágbèéká/PC pẹlu Windows 10, 11
- 2 x microUSB okun
- 1x ST-LINK-V3SET (tabi ST-LINK-V3MINI) olutọpa / olupilẹṣẹ
HW prerequisites ati setup fun STEVAL-STWINBX1
- 1x STEVAL-STWINBX1 igbelewọn ọkọ
- Kọǹpútà alágbèéká/PC pẹlu Windows 10, 11
- 1 x microUSB okun
- 1x iru-C okun USB
- 1x ST-LINK-V3SET (tabi ST-LINK-V3MINI) olutọpa / olupilẹṣẹ
HW prerequisites ati setup fun STEVAL-MKBOXPRO
- 1x STEVAL-MKBOXPRO igbimọ igbelewọn
- Kọǹpútà alágbèéká/PC pẹlu Windows 10, 11
- 1 x microUSB okun
- 1x iru-C okun USB
- 1x ST-LINK-V3SET (tabi ST-LINK-V3MINI) olutọpa / olupilẹṣẹ
Bẹrẹ ifaminsi ni iṣẹju diẹ
Laasigbotitusita fun STEVAL-MKBOXPRO
Nigbati awọn ọkọ bẹrẹ, fun gbogbo awọn Mofiamples, awọn ọkọ yoo lo Orange LED fun a fihan pe ohun gbogbo ti wa ni daradara initialized ati awọn ti o ṣiṣẹ.
Ririnkiri Awọn ohun elo: AI Inertial
FP-SNS-STAIOTCFT (AI Inertial)
STEVAL-MKBOXPRO – STWINKT1B – STWINBX1
Idi ti ohun elo yii ni lati ṣafihan ohun elo itọka lori Core Learning Machine ati lori MCU, ISPU. Fun gbogbo awọn igbimọ idagbasoke ohun elo naa bẹrẹ ṣiṣanwọle awọn abajade taara nipa isọdi ti Oju iṣẹlẹ Titele dukia, ṣugbọn ni ipilẹ eyikeyi ohun elo MLC le ṣee lo nipa gbigbe nirọrun iṣeto tuntun kan nipasẹ aṣẹ PnPL kan pato Oju iṣẹlẹ Titele dukia Smart jẹ ifihan kanna ni Portal ti ST AIoT Craft.
Gbogbo awọn iwe aṣẹ wa ni taabu Apẹrẹ ti awọn ọja ti o jọmọ weboju-iwe
- FP-SNS-STBOX1:
- DB: STM32Cube iṣẹ pack - databrief
- UM: Bibẹrẹ pẹlu idii iṣẹ STM32Cube – afọwọṣe olumulo
- Eto software file
STM32 Ṣii Idagbasoke Ayika
Pariview
STM32 Ṣii Idagbasoke Ayika Yara, Iṣeduro Aṣaro ati Idagbasoke
Ayika Idagbasoke Ṣii STM32 (STM32 ODE) jẹ ṣiṣi, rọ, rọrun, ati ọna ti ifarada lati ṣe agbekalẹ awọn ẹrọ imotuntun ati awọn ohun elo ti o da lori idile microcontroller STM32 32-bit ni idapo pẹlu awọn paati ST-ti-ti-aworan miiran ti o sopọ nipasẹ awọn igbimọ imugboroja. O jẹ ki afọwọṣe iyara ṣiṣẹ pẹlu awọn paati iwaju-eti ti o le yipada ni iyara si awọn apẹrẹ ikẹhin.
Fun alaye siwaju sii, jọwọ ṣabẹwo www.st.com/stm32ode
e dupe
© STMicroelectronics – Gbogbo ẹtọ wa ni ipamọ.
Aami ile-iṣẹ STMicroelectronics jẹ aami-iṣowo ti a forukọsilẹ ti ẹgbẹ awọn ile-iṣẹ STMicroelectronics. Gbogbo awọn orukọ miiran jẹ ohun-ini ti awọn oniwun wọn.
FAQS
Q: Kini awọn ẹya pataki ti FP-SNS-STAIOTCFT?
A: FP-SNS-STAIOTCFT n pese awọn ohun elo ti o rọrun fun idagbasoke aṣa lori awọn igbimọ kan pato ati ti a ṣe lori imọ-ẹrọ sọfitiwia STM32Cube fun gbigbe.
Ibeere: Nibo ni MO le wa alaye diẹ sii nipa ohun elo hardware ati awọn ohun pataki ṣaaju?
A: Alaye ni kikun nipa ohun elo hardware ati awọn ohun elo pataki sọfitiwia ni a le rii ninu iṣeto naaview apakan ti iwe afọwọkọ olumulo.
Q: Bawo ni MO ṣe bẹrẹ ifaminsi ni lilo FP-SNS-STAIOTCFT?
A: Lati bẹrẹ ifaminsi pẹlu FP-SNS-STAIOTCFT, tẹle awọn ilana iṣeto ti a pese ninu afọwọṣe olumulo ki o tọka si iwe ilana igbekalẹ fun itọsọna.
Awọn iwe aṣẹ / Awọn orisun
 |
STMicroelectronics STM32Cube Alailowaya Industrial Node SensorTile Box [pdf] Itọsọna olumulo STM32Cube, STM32Cube Alailowaya Ile ise Node SensorTile Apoti, Apoti sensọ Node Iṣẹ Alailowaya, Apoti sensọ Node Iṣẹ, Apoti sensọTile |