STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box

Hardware le Software li felileview

Hardware Overview

1. Samplisebelisoa li fumaneha bakeng sa:
2.  STEVAL-STWINBX1 STWIN.box – SensorTile Wireless Industrial Node Kit
3.  STEVAL-MKBOXPRO SensorTile.box-Pro li-sensor tse ngata le lisebelisoa tsa nts'etsopele ea khokahanyo e se nang mohala bakeng sa node efe kapa efe e bohlale ea IoT.
4. STEVAL-STWINKT1B STWIN – SensorTile Wireless Industrial Node Kit Development Kit

Hardware Overview (2/2)

• STWIN.box - SensorTile Wireless Industrial Node
• STWIN.box (STEVAL-STWINBX1) ke sesebelisoa sa nts'etsopele le moralo oa litšupiso o nolofatsang prototyping le liteko tsa lits'ebetso tse tsoetseng pele tsa liindasteri maemong a IoT joalo ka tlhahlobo ea maemo le tlhokomelo e boletsoeng esale pele.
• Ke tlhabollo ea lisebelisoa tsa mantlha tsa STWIN (STEVAL-STWINKT1B) 'me e fana ka ts'ebetso e nepahetseng ea mochini ho lekanya ho thothomela, matla a ntlafalitsoeng, BoM e nchafalitsoeng ho bonts'a li-MCU tsa morao-rao tse maemong a holimo le li-sensor tsa indasteri, le sebopeho se bonolo ho se sebelisa bakeng sa litlatsetso tsa kantle.
• The STWIN.box kit e na le STWIN.box core system, betri ea 480mAh LiPo, adaptara bakeng sa ST-LINK debugger (STEVAL-MKIGIBV4), mokotla oa polasetiki, boto ea adapter bakeng sa li-sensor tsa DIL 24 le cable e tenyetsehang.

Likarolo tsa Bohlokoa

• Multi-sensing wireless platform for monitoring vibrate and ultrasound discovery
•  E hahiloe ho potoloha STWIN.box core system board e nang le ts'ebetso, ho utloa, ho hokahana, le bokhoni ba ho atolosa
• Matla a tlase haholo a Arm® Cortex®-M33 e nang le FPU le TrustZone ho 160 MHz, 2048 kBytes Flash memory (STM32U585AI)
• Slot ea karete ea MicroSD bakeng sa lits'ebetso tse ikemetseng tsa ho rema data
• Thekenoloji ya waelese ya Bluetooth® e tlase ya matla a tlase a v5.0 (BlueNRG-M2), Wi-Fi (EMW3080) le NFC (ST25DV04K)
•  Mefuta e mengata e fapaneng ea li-sensor tsa IoT tsa indasteri: Ultra-wide bandwidth (ho fihla ho 6 kHz), lerata le tlase, 3-axis digital vibration sensor (IIS3DWB), 3D accelerometer + 3D gyro iNEMO inertial measurement unit (ISM330DHCX) e nang le Machine Learning Core, High-performance-low-power 3 (IIS2DLPC), Ultra-low power 3-axis magnetometer (IIS2MDC), Dual full-scale, 1.26 bar le 4 bar, absolute digital output barometer ka har'a sephutheloana se tletseng hlobo (ILPS22QS), Low-voltage, matla a tlase haholo, 0.5°C ho nepahala I²C/SMBus 3.0 sensara mocheso (STTS22H), maekrofounu ea MEMS ea boemo ba Industrial grade (IMP34DT05), maekrofounu ea Analog MEMS e nang le karabelo ea khafetsa ho fihla ho 80 kHz (IMP23ABSU)
• E atolosoa ka sehokelo sa 34-pin FPC
• Lintlha tsa morao-rao li fumaneha ho www.st.com/stwinbx1

Hardware Overview (2/2)

• Setsi sa nts'etsopele sa STEVAL-STWINBX1 se kenyelletsa:
• STEVAL-STWBXCS1 STWIN.box core system (boto e kholo)
• Mokotla oa polasetiki o nang le liboutu tsa M3
• Betri ea LiPo ea 480 mAh 3.7 V
• Adapter ea STEVAL-MKIGIBV4 ST-LINK e nang le thapo ea lenaneo
• Boto ea adaptara ea STEVAL-C34DIL24 bakeng sa lisensara tsa DIL24 tse nang le thapo e feto-fetohang ea STEVAL-FLTCB01.

• Hardware Overview (1/2) 

SensorTile.box-Pro - lisebelisoa tse ngata tsa li-sensor le khokahanyo e se nang mohala bakeng sa node efe kapa efe e bohlale ea IoT.

• SensorTile.box-Pro (STEVAL-MKBOXPRO) ke sephutheloana se secha se lokiselitsoeng ho sebelisoa bakeng sa ho nts'etsapele ts'ebeliso efe kapa efe ea IoT e ipapisitseng le ho bokelloa le tlhahlobo ea data e hole, sebelisa bokhoni bo felletseng ba lisebelisoa ka ho sebelisa matla a ho lemoha litaba tsa tikoloho, hammoho le maekrofono a dijithale, le ho ntlafatsa khokahanyo le bohlale tikolohong efe kapa efe eo u iphumanang u le ho eona.
•  SensorTile.box-Pro kit e na le SensorTile.box-Pro core system, betri ea 480mAh LiPo, adaptara bakeng sa ST-LINK debugger (STEVAL-MKIGIBV4), mokotla oa polasetiki, li-electrode tsa QVAR, seketsoana sa tjhaja e se nang mohala le thapo e tenyetsehang.

Likarolo tsa Bohlokoa

• Matla a tlase haholo a nang le FPU Arm-Cortex-M33 e nang le TrustZone® microcontroller (STM32U585AI)
• Li-sensor tse nepahetseng tse phahameng ho bokella lintlha tsa boleng bo holimo: low-voltage sensor ea mocheso oa sebaka sa dijithale (STTS22H), yuniti ea selekanyo sa inertial ea litšepe tse tšeletseng (LSM6DSV16X), accelerometer ea li-axis tse tharo tse tlase (LIS2DU12), 3-axis magnetometer (LIS2MDL), sensor ea khatello (LPS22DF) le maekerofounu ea dijithale / audio sensor (MP23DB01HP)
• Sesebelisoa sa motlakase sa HW, li-LED tse 4 tse ka khonehang (tse botala, bokhubelu, lamunu, boputsoa), li-push-button tse 2, audio buzzer-konopo ea Reset, qvar e nang le li-electrode bakeng sa boiphihlelo ba mosebelisi.
• Sehokelo bakeng sa J-Link/SWD debug-probe, Interface bakeng sa boto ea katoloso le sokete bakeng sa li-adapter tsa sensor tsa DIL24
• Khokahano: sekotjana sa karete ea microSD, Bluetooth® Low Energy 5.2 (BlueNRG 355AC), NFC tag (ST25DV04K)
• Likhetho tsa matla le ho tjhaja: USB Type-C® ho tjhaja le ho hokela, 5 W ho tjhaja waelese le betri ya 480 mAh.
• Lintlha tsa morao-rao li fumaneha ho www. https://www.st.com/en/evaluation-tools/stevalmkboxpro.html

Hardware Overview (2/2)

• Setsi sa nts'etsopele sa STEVAL-MKBOXPRO se kenyelletsa:
• SensorTile.Box Pro (boto e kholo)
•  mokotla oa polasetiki o nang le likurufu tsa M2.5
• betri ea LiPo ea 480 mAh ea 3.7 V
• Li-electrode tsa Qvar
• waelese tjhaja circuit
• NFC e hlophisitsoeng tag
• karete ea microSD
• STEVAL-MKIGIBV4 STLINK adaptara e nang le thapo ea lenaneo

Software Ho Fetaview

• FP-SNS-STAIOTCFT Tlhaloso ea Software
• FP-SNS-STAIOTCFT ke STM32Cube Function Pack e hahiloeng ho sebelisoa hammoho le Web kopo ST AIoT Craft.
• Sepheo sa pakete ena e sebetsang ke ho fana ka lisebelisoa tse bonolo tse bontšang mokhoa oa ho haha ​​​​likopo tsa tloaelo bakeng sa liboto tsa STEVAL-MKBOXPRO, STEVAL-STWINBX1 le STEVAL-STWINKT1B.
• Katoloso e hahiloe ho theknoloji ea software ea STM32Cube ho nolofatsa ts'ebetso ho li-microcontroller tse fapaneng tsa STM32.

Lintlha tse ka sehloohong

• Tlatsa lisebelisoa tsa ho sebelisa:
• AI algorithms ho MCU, MLC le ISPU
• Ho sebelisa protocol ea PnPL ho buisana le ho romella litaelo/telemetries/properites
• Ho sebelisa puisano ea serial ea USB ho hlahisa liphetho tsa maikutlo
• Ho sebelisa X-CUBE-MEMS1/ISPU e seng e ntse e le teng ho shebisa li-sensor tse fapaneng
• Ho sebelisa X-CUBE-AI ho kenya marang-rang a khethiloeng a neural
• E bonolo ho pholletsa le malapa a fapaneng a MCU, ka lebaka la STM32Cube
• Lipehelo tsa laesense tsa mahala, tse bonolo ho basebelisi.
• Lintlha tsa morao-rao li fumaneha ho www.st.com FP-SNS-STAIOTCFT

Lisebelisoa tsa ho seta le ho bonts'a

Software le Litlhoko tse ling

FP-SNS-STAIOTCFT
Kopitsa .zip file dikahare ho foldara ho PC ea hau. Sephutheloana se tla ba le khoutu ea mohloli example (Keil, IAR, STM32Cube IDE) e thehiloeng ho STEVAL-STWINKT1B, STEVAL-STWINBX1 le STEVAL-MKBOXPRO.

Ho seta ho fetaview

Litlhokahalo tsa HW le ho seta bakeng sa STEVAL-STWINKT1B

• 1x Boto ea tlhahlobo ea STEVAL-STWINKT1B
• Laptop / PC e nang le Windows 10, 11
• 2 x thapo ea microUSB
• 1x ST-LINK-V3SET (kapa ST-LINK-V3MINI) debugger/programmer

Litlhokahalo tsa HW le ho seta bakeng sa STEVAL-STWINBX1

• 1x STEVAL-STWINBX1 boto ea tlhahlobo
• Laptop / PC e nang le Windows 10, 11
• 1 x thapo ea microUSB
• 1x thapo ea USB ea mofuta oa C
• 1x ST-LINK-V3SET (kapa ST-LINK-V3MINI) debugger/programmer

Litlhokahalo tsa HW le ho seta bakeng sa STEVAL-MKBOXPRO

• 1x Boto ea tlhahlobo ea STEVAL-MKBOXPRO
• Laptop / PC e nang le Windows 10, 11
• 1 x thapo ea microUSB
• 1x thapo ea USB ea mofuta oa C
• 1x ST-LINK-V3SET (kapa ST-LINK-V3MINI) debugger/programmer

Qala ho khouta ka mor'a metsotso e seng mekae

www.st.com/stm32ode

Tharollo ea mathata bakeng sa STEVAL-MKBOXPRO

Ha boto e qala, bakeng sa bohle ba peleampLeha ho le joalo, boto e tla sebelisa Orange LED bakeng sa ho bontša hore ntho e 'ngoe le e' ngoe e qalile hantle 'me e sebetsa.

Lisebelisoa tsa Demo: AI Inertial

FP-SNS-STAIOTCFT (AI Inertial)

STEVAL-MKBOXPRO – STWINKT1B – STWINBX1

Morero oa ts'ebeliso ena ke ho bonts'a ts'ebeliso ea boithuto ho Mochine oa ho Ithuta oa Mochine le ho MCU, ISPU. Bakeng sa liboto tsohle tsa nts'etsopele ts'ebeliso e qala ho phallela liphetho ka kotloloho mabapi le ho hlophisoa ha Ts'ebetso ea Ts'ebetso ea Letlotlo, empa ha e le hantle ts'ebeliso efe kapa efe ea MLC e ka sebelisoa feela ka ho kenya tlhophiso e ncha ka taelo e itseng ea PnPL The Smart Asset Tracking Scenario e ts'oana e bonts'itsoeng ho Portal ea ST AIoT Craft.

Litokomane le Lisebelisoa tse Amanang

Litokomane tsohle li fumaneha ho thebo ea DESIGN ea lihlahisoa tse amanang webleqephe

• FP-SNS-STBOX1:
• DB: pakete ea ts'ebetso ea STM32Cube - databrief
• UM: Ho qala ka pakete ea ts'ebetso ea STM32Cube - buka ea mosebelisi
• Ho seta software file

STM32 Open Development Tikoloho

Fetileview

STM32 Open Development Tikoloho e Potlakile, e theko e tlase ea Prototyping le Nts'etsopele

The STM32 Open Development Environment (STM32 ODE) ke tsela e bulehileng, e tenyetsehang, e bonolo, le e theko e tlaase ea ho hlahisa lisebelisoa tse ncha le lisebelisoa tse thehiloeng ho lelapa la microcontroller la STM32 32-bit hammoho le likarolo tse ling tsa boemo bo holimo tsa ST tse amanang le liboto tsa ho atolosa. E nolofalletsa prototyping e potlakileng e nang le likarolo tse ka pele tse ka fetoloang ka potlako ho ba meralo ea ho qetela.

Ho fumana lintlha tse ling, ka kopo etela www.st.com/stm32ode

kea leboha

© STMicroelectronics – Litokelo tsohle li sirelelitsoe.
Letšoao la khoebo la STMicroelectronics ke letšoao la khoebo le ngolisitsoeng la sehlopha sa likhamphani tsa STMicroelectronics. Mabitso a mang kaofela ke thepa ea beng ba ona.

FAQS

P: Ke lintlha life tsa bohlokoa tsa FP-SNS-STAIOTCFT?

A: FP-SNS-STAIOTCFT e fana ka likopo tse bonolo bakeng sa nts'etsopele ea tloaelo ho liboto tse khethehileng 'me e hahiloe holim'a theknoloji ea software ea STM32Cube bakeng sa ho nkeha.

P: Nka fumana boitsebiso bo eketsehileng hokae mabapi le litlhoko tsa hardware le software?

A: Lintlha tse qaqileng mabapi le li-prerequisites tsa hardware le software li ka fumanoa ho setup overview karolo ea bukana ea mosebelisi.

P: Nka qala joang ho khouta ka FP-SNS-STAIOTCFT?

A: Ho qala ho kenya likhoutu le FP-SNS-STAIOTCFT, latela litaelo tsa ho seta tse fanoeng bukeng ea mosebelisi 'me u shebe litokomane tsa sebopeho sa sephutheloana bakeng sa tataiso.

Litokomane / Lisebelisoa

STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box [pdf] Bukana ea Mosebelisi STM32Cube, STM32Cube Wireless Industrial Node SensorTile Box, Wireless Industrial Node SensorTile Box, Industrial Node SensorTile Box, SensorTile Box

Litšupiso

• Bukana ea Mosebelisi