STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box

Natapos ang Hardware ug Softwareview

Nahuman ang Hardwareview

1. Sample implementations are available for:
2.  STEVAL-STWINBX1 STWIN.box – SensorTile Wireless Industrial Node Development Kit
3.  STEVAL-MKBOXPRO SensorTile.box-Pro multi-sensors and wireless connectivity development kit for any intelligent IoT node
4. STEVAL-STWINKT1B STWIN – SensorTile Wireless Industrial Node Development Kit

Nahuman ang Hardwareview (2/2)

• STWIN.box – SensorTile Wireless Industrial Node
• The STWIN.box (STEVAL-STWINBX1) is a development kit and reference design that simplifies prototyping and testing of advanced industrial sensing applications in IoT contexts such as condition monitoring and predictive maintenance.
• It is an evolution of the original STWIN kit (STEVAL-STWINKT1B) and features a higher mechanical accuracy in the measurement of vibrations, an improved robustness, an updated BoM to reflect the latest and best-in-class MCU and industrial sensors, and an easy-to-use interface for external add-ons.
• The STWIN.box kit consists of an STWIN.box core system, a 480mAh LiPo battery, an adapter for the ST-LINK debugger (STEVAL-MKIGIBV4), a plastic case, an adapter board for DIL 24 sensors and a flexible cable.

Pangunang mga bahin

• Multi-sensing wireless platform for vibration monitoring and ultrasound detection
•  Built around STWIN.box core system board with processing, sensing, connectivity, and expansion capabilities
• Ultra-low power Arm® Cortex®-M33 with FPU and TrustZone at 160 MHz, 2048 kBytes Flash memory (STM32U585AI)
• MicroSD card slot for standalone data logging applications
• On-board Bluetooth® low energy v5.0 wireless technology (BlueNRG-M2), Wi-Fi (EMW3080) and NFC (ST25DV04K)
•  Wide range of industrial IoT sensors: Ultra-wide bandwidth (up to 6 kHz), low-noise, 3-axis digital vibration sensor (IIS3DWB), 3D accelerometer + 3D gyro iNEMO inertial measurement unit (ISM330DHCX) with Machine Learning Core, High-performance ultra-low-power 3-axis accelerometer for industrial applications (IIS2DLPC), Ultra-low power 3-axis magnetometer (IIS2MDC), Dual full-scale, 1.26 bar and 4 bar, absolute digital output barometer in full-mold package (ILPS22QS), Low-voltage, ultra low-power, 0.5°C accuracy I²C/SMBus 3.0 temperature sensor (STTS22H), Industrial grade digital MEMS microphone (IMP34DT05), Analog MEMS microphone with frequency response up to 80 kHz (IMP23ABSU)
• Expandable via a 34-pin FPC connector
• Pinakabag-o nga impormasyon nga anaa sa www.st.com/stwinbx1

Nahuman ang Hardwareview (2/2)

• The STEVAL-STWINBX1 development kit includes:
• The STEVAL-STWBXCS1 STWIN.box core system (main board)
• A plastic case with M3 bolts
• A 480 mAh 3.7 V LiPo battery
• The STEVAL-MKIGIBV4 ST-LINK adapter with programming cable
• The STEVAL-C34DIL24 adapter board for DIL24 sensors with the STEVAL-FLTCB01 flexible cable.

• Nahuman ang Hardwareview (1/2) 

SensorTile.box-Pro – multi-sensors and wireless connectivity development kit for any intelligent IoT node.

• The SensorTile.box-Pro (STEVAL-MKBOXPRO) s the new ready-to-use programmable wireless box kit for developing any IoT application based on remote data gathering and evaluation, exploit the full kit potential by leveraging both motion and environmental data sensing, along with a digital microphone, and enhance the connectivity and smartness of whatever environment you find yourself into.
•  The SensorTile.box-Pro kit consists of a SensorTile.box-Pro core system, a 480mAh LiPo battery, an adapter for the ST-LINK debugger (STEVAL-MKIGIBV4), a plastic case, QVAR electrodes, Wireless charger receiver circuit and a flexible cable.

Pangunang mga bahin

• Ultra -low-power with FPU Arm-Cortex-M33 with TrustZone® microcontroller (STM32U585AI)
• High precision sensors to gather high-quality data: low-voltage local digital temperature sensor (STTS22H), six-axis inertial measurement unit (LSM6DSV16X), three-axis low-power accelerometer (LIS2DU12), 3-axis magnetometer (LIS2MDL), pressure sensor (LPS22DF) and digital microphone/audio sensor (MP23DB01HP)
• HW power switch, 4 programmable status LEDs (green, red, orange, blue), 2 programmable push-buttons, audio buzzer–Reset button, qvar with electrodes for user interface experience
• Interface for J-Link/SWD debug-probe, Interface for extension board and socket for DIL24 sensor adapters
• Connectivity: microSD card slot, Bluetooth® Low Energy 5.2 (BlueNRG 355AC), NFC tag (ST25DV04K)
• Power and charging options: USB Type-C® charging and connecting, 5 W wireless charging and 480 mAh battery
• Pinakabag-o nga impormasyon nga anaa sa www. https://www.st.com/en/evaluation-tools/stevalmkboxpro.html

Nahuman ang Hardwareview (2/2)

• The STEVAL-MKBOXPRO development kit includes:
• The SensorTile.Box Pro (main board)
•  a plastic case with M2.5 screws
• a 480 mAh 3.7 V LiPo battery
• Qvar electrodes
• wireless charger receiver circuit
• programmable NFC tag
• microSD card
• STEVAL-MKIGIBV4 STLINK adapter with programming cable

Natapos ang Softwareview

• FP-SNS-STAIOTCFT Software Description
• The FP-SNS-STAIOTCFT is a STM32Cube Function Pack built to be used together with the Web application ST AIoT Craft.
• The purpose of this functional pack is to provide simple applications that show how to build custom applications for STEVAL-MKBOXPRO, STEVAL-STWINBX1 and STEVAL-STWINKT1B boards.
• Ang pagpalapad gitukod sa STM32Cube software technology aron mapagaan ang portability sa lain-laing STM32 microcontrollers.

Pangunang mga bahin

• Complete applications on how to use:
• AI algorithms on MCU, MLC and ISPU
• Using PnPL protocol to communicate and sending commands/telemetries/properites
• Using USB serial communication to display the inference results
• Exploiting already existing X-CUBE-MEMS1/ISPU to target the different sensors
• Exploiting the X-CUBE-AI to import a chosen neural network
• Sayon nga pagdala sa lainlaing mga pamilya sa MCU, salamat sa STM32Cube
• Libre, user-friendly nga mga termino sa lisensya.
• Pinakabag-o nga impormasyon nga anaa sa www.st.com FP-SNS-STAIOTCFT

Setup & Demo Applications

Software and Other Prerequisites

FP-SNS-STAIOTCFT
Kopyaha ang .zip file content into a folder on your PC. The package will contain source code example (Keil, IAR, STM32Cube IDE) based on STEVAL-STWINKT1B, STEVAL-STWINBX1 and STEVAL-MKBOXPRO.

Pag-andam saview

HW prerequisites and setup for STEVAL-STWINKT1B

• 1x STEVAL-STWINKT1B evaluation board
• Laptop/PC with Windows 10, 11
• 2 x microUSB cable
• 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer

HW prerequisites and setup for STEVAL-STWINBX1

• 1x STEVAL-STWINBX1 evaluation board
• Laptop/PC with Windows 10, 11
• 1 x microUSB cable
• 1x type-C USB cable
• 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer

HW prerequisites and setup for STEVAL-MKBOXPRO

• 1x STEVAL-MKBOXPRO evaluation board
• Laptop/PC with Windows 10, 11
• 1 x microUSB cable
• 1x type-C USB cable
• 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer

Sugdi ang coding sa pipila lang ka minuto

www.st.com/stm32ode

Troubleshooting for STEVAL-MKBOXPRO

When the board starts, for all the examples, the board will use the Orange LED for showing that everything is well initialized and it’s working.

Demo Applications: AI Inertial

FP-SNS-STAIOTCFT (AI Inertial)

STEVAL-MKBOXPRO – STWINKT1B – STWINBX1

The purpose of this application is to show an inference application on the Machine Learning Core and on MCU, ISPU.  For all the development boards the application starts streaming directly results regarding a classification of an Asset Tracking Scenario, but in principle any MLC application can be used by simply loading a new configuration by means of a specific PnPL command The Smart Asset Tracking scenario is the same displayed in the Portal of ST AIoT Craft.

Mga Dokumento ug May Kalabutan nga mga Kapanguhaan

Ang tanan nga mga dokumento anaa sa DESIGN tab sa mga may kalabutan nga mga produkto webpanid

• FP-SNS-STBOX1:
• DB: STM32Cube function pack – databrief
• UM: Getting started with the STM32Cube function pack – user manual
• Pag-setup sa software file

STM32 Open Development Environment

Tapos naview

STM32 Open Development Environment Paspas, barato nga Prototyping ug Development

The STM32 Open Development Environment (STM32 ODE) is an open, flexible, easy, and affordable way to develop innovative devices and applications based on the STM32 32-bit microcontroller family combined with other state-of-the-art ST components connected via expansion boards. It enables fast prototyping with leading-edge components that can quickly be transformed into final designs.

Para sa dugang nga impormasyon, palihog bisitaha www.st.com/stm32ode

Salamat

© STMicroelectronics – Tanang katungod gigahin.
The STMicroelectronics corporate logo is a registered trademark of the STMicroelectronics group of companies. All other names are the property of their respective owners.

FAQ

Q: What are the key features of the FP-SNS-STAIOTCFT?

A: The FP-SNS-STAIOTCFT provides simple applications for custom development on specific boards and is built on STM32Cube software technology for portability.

Q: Where can I find more information about the hardware and software prerequisites?

A: Detailed information about the hardware and software prerequisites can be found in the setup overview seksyon sa manwal sa gumagamit.

Q: How do I start coding using the FP-SNS-STAIOTCFT?

A: To start coding with the FP-SNS-STAIOTCFT, follow the setup instructions provided in the user manual and refer to the package structure documentation for guidance.

Mga Dokumento / Mga Kapanguhaan

STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box [pdf] Giya sa Gumagamit STM32Cube, STM32Cube Wireless Industrial Node SensorTile Box, Wireless Industrial Node SensorTile Box, Industrial Node SensorTile Box, SensorTile Box

Mga pakisayran

• Manwal sa Gumagamit