ʻO STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box

Pau nā lako lako a me nā lako polokalamuview

Pau Lako Paaview

1. SampLoaʻa nā hoʻokō no:
2.  STEVAL-STWINBX1 STWIN.box – ʻO ka mea hoʻomohala ʻenehana ʻenehana ʻenehana ʻole SensorTile
3.  STEVAL-MKBOXPRO SensorTile.box-Pro multi-sensors a me ka pahu hoʻomohala hoʻohui uila no kēlā me kēia node IoT naʻauao.
4. STEVAL-STWINKT1B STWIN – ʻO ka ʻenehana hoʻomohala ʻenehana ʻenehana ʻole SensorTile

Pau Lako Paaview (2/2)

• STWIN.box – Pūnaehana ʻOihana ʻImi ʻole ʻo SensorTile
• ʻO ka STWIN.box (STEVAL-STWINBX1) kahi pahu hoʻomohala a me ka hoʻolālā kuhikuhi e hoʻomaʻamaʻa i ka prototyping a me ka hoʻāʻo ʻana i nā noi ʻike ʻenehana kiʻekiʻe ma nā pōʻaiapili IoT e like me ka nānā ʻana i ke kūlana a me ka mālama wānana.
• He hoʻololi ia o ka STWIN kit mua (STEVAL-STWINKT1B) a loaʻa iā ia ka pololei mechanical kiʻekiʻe i ke ana ʻana o nā haʻalulu, kahi hoʻomaikaʻi ikaika, kahi BoM hou e hōʻike i ka MCU hou a maikaʻi loa i loko o ka papa a me nā ʻenehana ʻenehana, a me kahi maʻalahi e hoʻohana no nā mea hoʻohui waho.
• ʻO ka pahu STWIN.box kahi ʻōnaehana kumu STWIN.box, kahi pākaukau 480mAh LiPo, kahi mea hoʻopili no ka ST-LINK debugger (STEVAL-MKIGIBV4), kahi pahu plastik, kahi papa hoʻololi no nā mea ʻike DIL 24 a me kahi kaula maʻalahi.

Nā mea nui

• ʻO ke kahua uea ʻole he nui no ka nānā ʻana i ka vibration a me ka ʻike ultrasound
•  Kūkulu ʻia a puni ka papa ʻōnaehana kumu STWIN.box me ka hana ʻana, ka ʻike, ka hoʻohui ʻana, a me ka hiki ke hoʻonui
• Ka mana haʻahaʻa haʻahaʻa Arm® Cortex®-M33 me FPU a me TrustZone ma 160 MHz, 2048 kBytes Flash memory (STM32U585AI)
• Kāleka MicroSD no nā noi hoʻopaʻa inoa kūʻokoʻa
• Ma ka papa Bluetooth® ikehu haʻahaʻa v5.0 ʻenehana uila (BlueNRG-M2), Wi-Fi (EMW3080) a me NFC (ST25DV04K)
•  Ka laulā o nā mea ʻike IoT ʻenehana: Ka bandwidth ultra-ākea (a hiki i 6 kHz), haʻahaʻa haʻahaʻa, 3-axis digital vibration sensor (IIS3DWB), 3D accelerometer + 3D gyro iNEMO inertial ana inertial unit (ISM330DHCX) me ka Mīkini Aʻo Core, High-performance ultra-low-power application 3-axis ʻO ka mana loa-haʻahaʻa 3-axis magnetometer (IIS2MDC), pālua piha-nui, 1.26 bar a me 4 bar, pahu kikohoʻe puka kikohoʻe piha i loko o ka pūʻolo poni piha (ILPS22QS), Low-voltage, mana haʻahaʻa loa, pololei 0.5°C I²C/SMBus 3.0 ʻike wela (STTS22H), microphone MEMS kikohoʻe ʻenehana (IMP34DT05), microphone Analog MEMS me ka pane alapine a hiki i 80 kHz (IMP23ABSU)
• Hiki ke hoʻonui ʻia ma o kahi mea hoʻohui FPC 34-pin
• Loaʻa ka ʻike hou loa ma www.st.com/stwinbx1

Pau Lako Paaview (2/2)

• Aia ka pahu hoʻomohala STEVAL-STWINBX1:
• ʻO ka ʻōnaehana kumu STEVAL-STWBXCS1 STWIN.box (papa nui)
• ʻO kahi pahu plastik me nā kī M3
• He 480 mAh 3.7 V LiPo pākahi
• ʻO ka mea hoʻopili STEVAL-MKIGIBV4 ST-LINK me ke kaula hoʻonohonoho
• ʻO ka papa hoʻopili STEVAL-C34DIL24 no nā mea ʻike DIL24 me ke kaula maʻalahi STEVAL-FLTCB01.

• Pau Lako Paaview (1/2) 

SensorTile.box-Pro - nā mea ʻike he nui a me ka pahu hoʻomohala hoʻohui uila no kekahi node IoT naʻauao.

• ʻO ka SensorTile.box-Pro (STEVAL-MKBOXPRO) ʻo ia ka pahu pahu uila hiki ke hoʻohana hou ʻia no ka hoʻomohala ʻana i kekahi noi IoT e pili ana i ka hōʻiliʻili ʻikepili mamao a me ka loiloi, e hoʻohana i ka hiki piha piha ma o ka hoʻohana ʻana i ka ʻike ʻikepili a me ke kaiapuni, me kahi microphone digital, a hoʻonui i ka pilina a me ka naʻauao o kēlā me kēia wahi āu e ʻike ai iā ʻoe iho.
•  Aia i loko o ka pahu SensorTile.box-Pro kahi ʻōnaehana koʻikoʻi SensorTile.box-Pro, kahi pākahiko 480mAh LiPo, kahi mea hoʻopili no ka ST-LINK debugger (STEVAL-MKIGIBV4), kahi pahu plastik, QVAR electrodes, Wireless charger receiver circuit a me kahi kaula maʻalahi.

Nā mea nui

• Ka mana haʻahaʻa loa me ka FPU Arm-Cortex-M33 me ka microcontroller TrustZone® (STM32U585AI)
• Nā mea ʻike kikoʻī kiʻekiʻe e hōʻiliʻili i ka ʻikepili kiʻekiʻe: low-voltagʻO ka mea ʻike wela kikohoʻe kūloko (STTS22H), ʻeono-axis inertial ana ʻāpana (LSM6DSV16X), ʻekolu-axis low-power accelerometer (LIS2DU12), 3-axis magnetometer (LIS2MDL), pressure sensor (LPS22DF) a me kikohoʻe microphone/audio sensor (MP23DB01HP)
• Hoʻololi mana HW, 4 mau LED kūlana hoʻolālā ('ōmaʻomaʻo, ʻulaʻula, ʻalani, polū), 2 mau pihi paʻi polokalamu, buzzer leo–Pihi hoʻonohonoho hou, qvar me nā electrodes no ka ʻike hoʻohana.
• ʻIkepili no ka J-Link/SWD debug-probe, Interface no ka papa hoʻonui a me ke kumu no nā mea hoʻololi sensor DIL24
• Hoʻohui: slot kāleka microSD, Bluetooth® Low Energy 5.2 (BlueNRG 355AC), NFC tag (ST25DV04K)
• Nā koho mana a me ka hoʻouka ʻana: USB Type-C® ka hoʻouka ʻana a me ka hoʻopili ʻana, 5 W ka hoʻouka uila a me ka pā 480 mAh.
• Loaʻa ka ʻike hou loa ma www. https://www.st.com/en/evaluation-tools/stevalmkboxpro.html

Pau Lako Paaview (2/2)

• Aia ka pahu hoʻomohala STEVAL-MKBOXPRO:
• ʻO ka SensorTile.Box Pro (papa nui)
•  he pahu plastik me nā wili M2.5
• he 480 mAh 3.7 V LiPo pākahi
• Qvar electrodes
• kaapuni hoʻopaʻa uila uila
• NFC hiki ke hoʻolālā tag
• kāleka microSD
• STEVAL-MKIGIBV4 STLINK mea hoʻopili me ke kaula hoʻolālā

Polokalamu Overview

• FP-SNS-STAIOTCFT wehewehe lako polokalamu
• ʻO ka FP-SNS-STAIOTCFT kahi STM32Cube Function Pack i kūkulu ʻia e hoʻohana pū me ka Web palapala noi ST AIoT Craft.
• ʻO ke kumu o kēia pūʻolo hana ʻo ia ka hāʻawi ʻana i nā noi maʻalahi e hōʻike ana i ke kūkulu ʻana i nā noi maʻamau no nā papa STEVAL-MKBOXPRO, STEVAL-STWINBX1 a me STEVAL-STWINKT1B.
• Kūkulu ʻia ka hoʻonui ma luna o ka ʻenehana polokalamu STM32Cube e hōʻoluʻolu i ka lawe ʻana ma waena o nā microcontrollers STM32 like ʻole.

Nā hiʻohiʻona nui

• E hoʻopiha i nā noi no ka hoʻohana ʻana:
• AI algorithms ma MCU, MLC a me ISPU
• Ke hoʻohana nei i ka protocol PnPL e kamaʻilio a hoʻouna i nā kauoha/telemetries/properites
• Ke hoʻohana nei i ke kamaʻilio serial USB e hōʻike i nā hopena inference
• Ke hoʻohana nei i ka X-CUBE-MEMS1/ISPU i kēia manawa e hoʻopaʻa i nā ʻike like ʻole
• Ke hoʻohana nei i ka X-CUBE-AI e hoʻokomo i kahi pūnaewele neural i koho ʻia
• Hiki ke lawe maʻalahi i nā ʻohana MCU like ʻole, mahalo iā STM32Cube
• Kūʻokoʻa, ʻōlelo laikini mea hoʻohana.
• Loaʻa ka ʻike hou loa ma www.st.com FP-SNS-STAIOTCFT

Hoʻonohonoho a me nā noi demo

Nā lako polokalamu a me nā mea e pono ai

FP-SNS-STAIOTCFT
E kope i ka .zip file i loko o kahi waihona ma kāu PC. Loaʻa i ka pūʻolo ke code kumu example (Keil, IAR, STM32Cube IDE) ma muli o STEVAL-STWINKT1B, STEVAL-STWINBX1 a me STEVAL-MKBOXPRO.

Hoʻonohonohoview

Nā koi a me ka hoʻonohonoho HW no STEVAL-STWINKT1B

• 1x STEVAL-STWINKT1B papa loiloi
• Laptop/PC me Windows 10, 11
• 2 x microUSB uwea
• 1x ST-LINK-V3SET (a i ʻole ST-LINK-V3MINI) mea hoʻopau/programmer

Nā koi a me ka hoʻonohonoho HW no STEVAL-STWINBX1

• 1x STEVAL-STWINBX1 papa loiloi
• Laptop/PC me Windows 10, 11
• 1 x microUSB uwea
• 1x ʻano-C USB uwea
• 1x ST-LINK-V3SET (a i ʻole ST-LINK-V3MINI) mea hoʻopau/programmer

Nā koi a me ka hoʻonohonoho HW no STEVAL-MKBOXPRO

• 1x STEVAL-MKBOXPRO papa loiloi
• Laptop/PC me Windows 10, 11
• 1 x microUSB uwea
• 1x ʻano-C USB uwea
• 1x ST-LINK-V3SET (a i ʻole ST-LINK-V3MINI) mea hoʻopau/programmer

E hoʻomaka i ka coding i loko o kekahi mau minuke

www.st.com/stm32ode

Hoʻoponopono no STEVAL-MKBOXPRO

Ke hoʻomaka ka papa, no nā ex a pauampEia na'e, e ho'ohana ka papa i ka LED Orange no ka hō'ike 'ana ua ho'omaka maika'i nā mea a pau a ke hana nei.

Nā noi Demo: AI Inertial

FP-SNS-STAIOTCFT (AI Inertial)

STEVAL-MKBOXPRO – STWINKT1B – STWINBX1

ʻO ke kumu o kēia noi e hōʻike i kahi noi inference ma ka Machine Learning Core a ma MCU, ISPU. No nā papa hoʻomohala āpau, hoʻomaka ka palapala noi i ke kahe pololei ʻana i nā hopena e pili ana i ka hoʻokaʻawale ʻana i kahi Scenario Tracking Scenario, akā ma ke kumu, hiki ke hoʻohana ʻia kekahi noi MLC ma ka hoʻouka ʻana i kahi hoʻonohonoho hou ma o ke kauoha PnPL kikoʻī.

Nā Palapala a me nā kumuwaiwai pili

Loaʻa nā palapala āpau ma ka DESIGN tab o nā huahana pili webʻaoʻao

• FP-SNS-STBOX1:
• DB: STM32Cube pūʻolo hana - ʻikepili pōkole
• UM: E hoʻomaka me ka STM32Cube pūʻolo hana - manual mea hoʻohana
• Hoʻonohonoho polokalamu file

STM32 Open Development Environment

Pauview

STM32 Open Development Environment Fast, affordable Prototyping and Development

ʻO ka STM32 Open Development Environment (STM32 ODE) he ala hāmama, maʻalahi, maʻalahi, a me ke kumukūʻai e hoʻomohala i nā mea hana hou a me nā noi e pili ana i ka ʻohana microcontroller STM32 32-bit i hui pū ʻia me nā ʻāpana ST hou loa i hoʻopili ʻia ma o nā papa hoʻonui. Hāʻawi ia i ka prototyping wikiwiki me nā mea alakaʻi i hiki ke hoʻololi koke i nā hoʻolālā hope.

No ka 'ike hou aku, e kipa mai www.st.com/stm32ode

Mahalo

© STMicroelectronics – Ua mālama ʻia nā kuleana āpau.
ʻO ka logo hui STMicroelectronics kahi hōʻailona inoa inoa o ka hui STMicroelectronics o nā hui. ʻO nā inoa ʻē aʻe a pau ka waiwai o ko lākou mau mea nona.

FAQ

Nīnau: He aha nā hiʻohiʻona nui o ka FP-SNS-STAIOTCFT?

A: Hāʻawi ka FP-SNS-STAIOTCFT i nā noi maʻalahi no ka hoʻomohala maʻamau ma nā papa kikoʻī a kūkulu ʻia ma luna o ka ʻenehana polokalamu STM32Cube no ka lawe ʻana.

Nīnau: Ma hea e loaʻa ai iaʻu ka ʻike hou aʻe e pili ana i nā lako lako a me nā lako polokalamu?

A: Hiki ke ʻike ʻia ka ʻike kikoʻī e pili ana i ka lako lako a me nā lako polokalamu ma ka hoʻonohonoho ʻanaview ʻāpana o ka manual mea hoʻohana.

Nīnau: Pehea wau e hoʻomaka ai i ka coding me ka FP-SNS-STAIOTCFT?

A: No ka hoʻomaka ʻana i ka coding me ka FP-SNS-STAIOTCFT, e hahai i nā ʻōlelo aʻoaʻo hoʻonohonoho i hāʻawi ʻia ma ka manual mea hoʻohana a e nānā i ka palapala hoʻonohonoho pūʻolo no ke alakaʻi.

Palapala / Punawai

ʻO STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box [pdf] Ke alakaʻi hoʻohana STM32Cube, STM32Cube Pūnaehana Node Pūnaehana Pahu Pahu Pahu Pahu, Pahu Pahu Puka Uku Uku Uku

Nā kuhikuhi

• Palapala Hoʻohana