Pairing questions & answers

If your Soundpeats Q30PLUS is appearing under "Other devices" rather than as an audio device, it usually indicates that the computer has paired with…

Based on the available manual for the Harman JBL Party Xpert, there is no specific setting or menu option provided to disable or adjust…

If you are only hearing sound from one side of your Soundpeats Q30 Plus, please try the following troubleshooting steps: Reset the Headset: Connect…

Based on the available manual for the JBL Party Xpert, there is no specific setting or button combination listed to disable the startup or…

If your right earbud is not producing sound, it may have lost its connection to the left earbud or the device. You should perform…

If the right earbud of your Soundpeats Truengine SE is not responding to touch commands for volume control, please try the following troubleshooting steps:…

To pair your TOZO T10 earbuds with an MP3 player, ensure your MP3 player has Bluetooth capabilities and follow these steps: Enter Pairing Mode:…

To pair two T&G Bluetooth speakers using the TWS (True Wireless Stereo) function, follow these steps: Power On: Turn on both speakers. Ensure they…

It sounds like your earbuds have lost their internal synchronization and are stuck in mono mode. To fix this and pair them back together…

Yes, the TOZO T10 earbuds are compatible with any Bluetooth-enabled device, including an iMac. If they are not appearing in your Bluetooth menu, it…

If your T&G 116 speaker is disconnecting immediately after pairing, please try the following troubleshooting steps: Check Battery Level: Ensure the speaker is fully…

If your Soundpeats Truengine SE earbuds are not entering pairing mode (no "pairing" voice prompt) and are not appearing on your phone's Bluetooth list…

To use only one earbud (Single Ear Mode) with the TOZO T10, follow these steps: Switching to Single Mode: Simply take one earbud out…

There is no specific software configuration that switches sound between different parts of the earbud. If you are hearing sound from the side vents…

I am sorry to hear your T&G TG-191 speaker is not responding. While specific manuals for T&G models can vary, most TG-series speakers share…

Whether you can pair your Tozo T10 earbuds directly to your SiriusXM radio depends on the specific hardware installed on your bike. Most standalone…

Before discarding your earbuds, there are several steps you can take to try and revive them, as lithium-ion batteries can enter a deep discharge…

The ZERO-G button on the Tempur-Pedic Ease remote is a factory-set preset designed to adjust your legs to relieve pressure off the lower back.…

To disable the child lock on your Tempur-Pedic Ease 3.0 remote, follow these steps: Press and hold the HEAD UP and HEAD DOWN buttons…

To resolve the connection error on your iPhone, you should perform a factory reset of the earbuds and clear the Bluetooth cache on your…

If your Soundpeats Truengine2 earbuds are still not syncing after a factory reset, please ensure you are following the specific reset sequence correctly to…

The TOZO T10 earbuds are rated IPX8 waterproof, which protects them from water immersion; however, Bluetooth signals have significant difficulty traveling through water. When…

If you are unable to pair your Accu-Chek Instant meter to your OnePlus 6T, please ensure you are following the standard pairing sequence exactly…

If the MP3 player on your JBL Endurance Dive is not functioning, please check the following steps based on the manual: Switch to MP3…