Can I reset the registered FM radio stations on the Onkyo FR-N7EX?
Yes, you can reset or overwrite the registered FM stations on your Onkyo FR-N7EX. While the manual does not specify a single "delete all"…
Manuals+ Q&A
Onkyo questions & answers
Browse answered questions about Onkyo, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I select tracks 11 and beyond for USB playback on the Onkyo FR-N7EX?
The manual for the Onkyo FR-N7EX states that for USB playback, you should "Use the MULTI JOG dial and MENU buttons to navigate and…
How do I select SP, LP2, or LP4 recording modes on the ONKYO FR-N7EX?
To select the recording mode (SP, LP2, or LP4) on your ONKYO FR-N7EX (or similar FR-series models like the FR-7GXDV), you typically need to…
How do I display the remaining time on the Onkyo FR-N7EX?
To display the remaining time on the Onkyo FR-N7EX, you can use the DISPLAY button on the main unit or the Display Mode button…
Why is my Onkyo A-973 integrated amplifier not producing sound even though the power is on and the red lamp is lit?
If your Onkyo A-973 is powered on (red lamp lit) but not producing sound, please check the following common causes based on the manual's…
Why does my ONKYO FR-7GXDV display 'NO-DISK' and fail to play music CDs?
If your ONKYO FR-7GXDV displays "NO-DISK" after you have inserted a CD, it means the player's optical pickup is unable to detect or read…
How do I connect the Onkyo HT-R380 Receiver to a Sony Bravia Smart TV?
The provided manual for the Onkyo HT-R380 AV Stereo Receiver indicates that it uses RCA cables for audio and video component connections. To connect…
Where can I find the full user manual for the ONKYO Muse Y-50 Network Integrated Amplifier?
The document currently available for the ONKYO Muse Y-50 Network Integrated Amplifier is a Product Overview and Specifications sheet. It contains technical details such…
How can I reset and fix a 'Mechanism Error' on the Onkyo FR-N7SX? The MD loads but won't play or eject, and the CD player reads the track count but fails to play when the button is pressed.
A "Mechanism Error" on Onkyo FR series units like the FR-N7SX (or the similar FR-N7TX) usually indicates a physical obstruction, a worn-out drive belt,…
How do I reset the Onkyo M-5000R Reference Series Power Amplifier?
Based on the instruction manual for the Onkyo M-5000R, there is no specific "factory reset" button or software reset procedure mentioned, as this is…
Where can I find the full French user manual (approximately 100 pages) for the Onkyo TX-8470?
To find the full French instruction manual (Instruction Manual / Mode d'emploi) for the Onkyo TX-8470, you should visit the official Onkyo support website.…
Can I connect the ONKYO FR-N9NX to another amplifier to use it as a standalone CD and MD player?
Yes, you can use the ONKYO FR-N9NX as a CD/MD player source for another amplifier. To do this, you should use the analog output…
How can I restore the functions on my Onkyo RC-801M remote control?
To restore the functions of your Onkyo remote control (such as the RC-801M or the similar RC-880M), you should first ensure the remote is…
Does the Onkyo TX-8220 support bi-amping?
No, the Onkyo TX-8220 does not support a bi-amp configuration. It is a standard 2-channel stereo receiver designed to drive one or two pairs…
How do I configure my Onkyo AV receiver?
To configure your Onkyo AV receiver (such as the HT-R393), follow these fundamental setup steps: 1. Connections: Connect your TV to the HDMI OUT…
How do I ensure my streaming apps use the TV input on my Onkyo TX-NR656 receiver instead of switching to CAB/SAT?
The behavior you are experiencing is likely due to HDMI CEC (Consumer Electronics Control) settings or how your devices are connected. When you launch…
How do I ensure my receiver stays on the TV input when using streaming apps on my TV instead of switching to CAB/SAT?
The behavior you are describing is likely caused by HDMI CEC (Consumer Electronics Control) or RIHD settings, which allow devices to switch inputs automatically…
How do I connect a TV to the Onkyo TX-NR656 using an optical cable and select the correct input mode?
To use an optical cable with your Onkyo TX-NR656, follow these steps for physical connection and software assignment: Physical Connection: Connect the optical cable…
How can I record music onto a MiniDisc (MD) using the Onkyo FR-7GX?
To record music onto a MiniDisc (MD) using the Onkyo FR-7GX, follow these steps based on your source material: Recording from a CD (CD…
What microphones can be connected to the Onkyo A-9050 or A-9030 integrated amplifier?
The Onkyo A-9050 and A-9030 are hi-fi integrated amplifiers designed for music playback and do not have a dedicated microphone input (MIC IN). You…
Where can I find the manual for the ONKYO TX-SR607 AV Receiver in Hungarian?
The document available on this page is the Service Manual for the ONKYO TX-SR607 AV Receiver, which is provided in English. This type of…
Should I use Klipsch Optimized Mode (KOM) instead of Direct mode, or can they be used together?
Klipsch Optimized Mode (KOM) and Direct mode serve different purposes and generally should not be thought of as "either/or" in a way that excludes…
I added two additional 6-ohm speakers to my Onkyo HTX-11 system, but no sound is coming from them. Why is this happening?
The Onkyo HTX-11 is designed as a 2.1-channel system that uses virtual surround technology, but it does include amplifier and speaker terminals for expansion…
I added two additional 6-ohm speakers to my Onkyo HTX-11 system, but no sound is coming from them. Why is this happening?
The Onkyo HTX-11 is designed as a 2.1-channel system that uses virtual surround technology, but it does include terminals for expanding to a physical…