د VEX GO Lab 2 د ګنډلو روبوټ کارونکي لارښود

STEM Labs provide resources, materials, and information for
planning, teaching, and assessing with VEX GO. Lab Image Slideshows
complement the teacher-facing content.

موخې:

Creating and starting a VEXcode GO project to move the Code
Base robot forward and backward.
Solving problems with the Code Base robot using VEXcode
لاړ شه.

Coding the robot to drive forward and backward, explaining the
Drivetrain location.

موخې:

Create a project for the Code Base robot to move forward.

Create a project for the robot to move in reverse.
Identify the position, orientation, and location of the
روبوټ

Recognize the drivetrain location on the robot.

د معیارونو سره اړیکې:

Common Core State Standards (CCSS): Describing
objects using shapes and relative positions.

CSTA 1A-AP-10: Developing programs with
sequences and simple loops.
CSTA 1B-AP-11: Decomposing problems into
manageable subproblems.

ډیری پوښتل شوي پوښتنې (FAQ)

Q: How can I access the Lab Image Slideshows for students?

A: د لابراتوار انځور سلایډ شوونه د ملګري په توګه آنلاین شتون لري
د STEM لابراتوارونو د ښوونکي سره مخامخ محتوا ته. تاسو کولی شئ دوی ته لاسرسی ومومئ
د VEX GO STEM لابراتوارونو پلي کولو مقالې له لارې.

View Fullscreen

موخې او معیارونه

VEX GO – Robot Jobs Lab 2 – Sewer Robot Teacher Portal

د VEX GO STEM لابراتوار پلي کول
د STEM لابراتوارونه د VEX GO لپاره د آنلاین ښوونکي لارښود په توګه ډیزاین شوي دي. د چاپ شوي ښوونکي لارښود په څیر، د STEM لابراتوارونو ښوونکي ته مخامخ مینځپانګه ټولې سرچینې، توکي او معلومات چمتو کوي چې د VEX GO سره پلان کولو، تدریس کولو او ارزونې لپاره اړین دي. د لابراتوار انځور سلایډ شوونه د دې موادو سره د زده کونکي سره مخامخ ملګري دي. ستاسو په ټولګي کې د STEM لابراتوار پلي کولو څرنګوالي په اړه د نورو مفصلو معلوماتو لپاره، د VEX GO STEM لابراتوارونو پلي کولو مقاله وګورئ.

موخې

زده کونکي به درخواست وکړي
How to create and start a VEXcode GO project that makes the Code Base move forward and backward.

زده کونکي به معنی پیدا کړي
How to solve a problem with the Code Base robot and VEXcode GO. How robots can do jobs that are dirty, dull or dangerous; such as unsanitary work cleaning sewers, dull work in warehouses, or dangerous work ghting res.

زده کونکي به په کې مهارت ولري
Coding the Code Base robot to drive forward. Coding the Code Base robot to drive backward. Creating a VEXcode GO project to make the Code Base Robot move forward and backward. Explaining where the Drivetrain is on the Code Base robot.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

Students will know How to create and start a project using VEXcode GO and the Code Base robot. How to create a VEXcode GO project that correctly orders behaviors in a sequence in order to move the Code Base robot forward and backward. This can be done both individually and collaboratively.
موخې
Objective 1. Students will create and start a project that has the Code Base robot move forward. 2. Students will create and start a project that has the Code Base robot move in reverse. 3. Students will identify the position, orientation, and the location of the Code Base robot as it moves. 4. Students will identify where the drivetrain is on the Code Base robot.
Activity 1. In Play Part 1, students will create and start a project that has the Code Base robot move forward. 2. In Play Part 2, students will create and start a project that has the Code Base robot drive forward and in reverse. 3. In Play Part 1 and 2, students will be asked to place markers where the Code Base robot should end up after each project is started. 4. In the Mid-Play break the teacher will explain to students why there is a category of drivetrain blocks and where the drivetrain is on the Code Base robot.
Assessment 1. In Play Part 1, student projects will successfully drive the Code Base robot forward for a speci ed distance. 2. In Play Part 2, student projects will successfully drive the Code Base robot in reverse for a speci ed distance. 3. Students will compare their predictions versus the actual location that the Code Base robot ended up during Mid-Play Break and class discussions. 4. During the Share section, students will be able to identify where the drivetrain is on the Code Base robot using gestures.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

د معیارونو سره نښلول

د معیارونو ښودل
د عمومي اصلي حالت معیارونه (CCSS) CCSS.MATH.CONTENT.KGA1: د شکلونو نومونو په کارولو سره په چاپیریال کې شیان تشریح کړئ، او د دې شیانو نسبي موقعیتونه د اصطلاحاتو په کارولو سره تشریح کړئ لکه پورته، لاندې، څنګ ته، مخې ته، شاته، او وړاندې.
How Standard is Achieved: In Play Parts 1 and 2, students predict how far the Code Base robot will move and how accurate their predictions are. As a result, they will need to describe the position of the Code Base robot relative to their prediction. Additionally, the students will be asked by the teacher how changing the orientation of the Code Base robot will a ect where it ends up.
د کمپیوټر ساینس ښوونکو ټولنه (CSTA) د معیارونو ښودنه CSTA 1A-AP-10: د ترتیبونو او ساده لوپونو سره پروګرامونه رامینځته کړئ، ترڅو نظرونه څرګند کړئ یا ستونزه حل کړئ.
How Standard is Achieved: In Play Part 2, students will create and start a project where Drivetrain blocks are sequenced together to allow the Code Base robot to move forward and backward.
د کمپیوټر ساینس ښوونکو ټولنه (CSTA) د معیارونو ښودنه CSTA 1B-AP-11: ستونزې په کوچنیو، مدیریت وړ فرعي ستونزو ویشل (ماتول) ترڅو د پروګرام پراختیا پروسه اسانه کړي.
How Standard is Achieved: During the entire Lab, students will decompose the problem of how a robot should move in order to complete a job that is either dirty, dull, or dangerous. During the Play sections, students will break this problem down further by analyzing and programming their Code Base robot to drive forward and reverse a certain distance.

لنډیز
د اړتیا وړ توکي

لاندې د ټولو موادو لیست دی چې د VEX GO لابراتوار بشپړولو لپاره اړین دي. په دې موادو کې د زده کوونکو د مخنوي مواد او همدارنګه د ښوونکو د اسانتیاوو مواد شامل دي. دا سپارښتنه کیږي چې تاسو هر VEX GO کټ ته دوه زده کونکي وټاکئ.

په ځینو لابراتوارونو کې، د سلایډ شو په بڼه کې د تدریس سرچینو سره اړیکې شاملې دي. دا سلایډونه کولی شي ستاسو د زده کونکو لپاره شرایط او الهام چمتو کولو کې مرسته وکړي. ښوونکو ته به لارښوونه وشي چې څنګه د لابراتوار په اوږدو کې د وړاندیزونو سره سلایډونه پلي کړي. ټول سلایډونه د ترمیم وړ دي، او د زده کونکو لپاره وړاندیز کیدی شي یا د ښوونکي سرچینې په توګه کارول کیدی شي. د ګوګل سلایډونو سمولو لپاره، په خپل شخصي ډرایو کې یوه کاپي جوړه کړئ او د اړتیا په صورت کې یې ترمیم کړئ.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

نور د تدوین وړ اسناد شامل شوي ترڅو د لابراتوارونو پلي کولو کې د کوچني ګروپ په بڼه کې مرسته وکړي. کاري پاڼې لکه څنګه چې دي چاپ کړئ یا دا اسناد کاپي او ایډیټ کړئ ترڅو ستاسو د ټولګي اړتیاو سره سم وي. Exampد ډیټا راټولولو شیټ ترتیبونه د ځانګړو تجربو او اصلي خالي کاپي لپاره شامل شوي. پداسې حال کې چې دوی د تنظیم کولو لپاره وړاندیزونه لري، دا اسناد ټول د تدوین وړ دي ترڅو ستاسو ټولګي او ستاسو د زده کونکو اړتیاو سره سم وي.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

مواد

موخه

سپارښتنه

د VEX GO کټ

For students to build their Code Base 2.0.

د کوډ بیس ۲.۰ جوړولو لارښوونې (۳ بعدي) یا د کوډ بیس ۲.۰ جوړولو لارښوونې (PDF)

د زده کونکو لپاره که دوی دمخه د کوډ بیس 2.0 نه وي جوړ کړی، نو.

مخکې جوړ شوی کوډ بیس 2.0

For students to start projects in Lab activities.

VEXcode GO

For students to create and start projects on the Code Base robot.

د روبوټکس رولونه او معمولات ګوګل ډاک / .docx / .pdf

د ګروپ کار تنظیمولو لپاره د ګوګل ډاک د سمون وړ او د VEX GO کټ کارولو لپاره غوره طریقې. د زده کونکو لپاره چې د کوډ اساس جوړ کړي که دوی دمخه نه وي جوړ کړی.

په هر ګروپ کې ۱، په هر ګروپ کې ۱
په هر ګروپ کې ۱، په هر ګروپ کې ۱، په هر ګروپ کې ۱

ټابلیټ یا کمپیوټر

For the students to launch VEXcode GO.

په هر ګروپ کې 1

د لابراتوار ۱ انځور سلایډ شو د ګوګل ډاک / .pptx / .pdf
پنسلونه
Placement markers

د ښوونکو او زده کونکو لپاره په ټول لابراتوار کې حواله کول.
د زده کونکو لپاره د روبوټکس رولونو او معمولاتو کاري پاڼه ولیکئ.
For students to visually predict where the Code Base robot will end
up after it has completed its movement.

1 for teacher facilitation 1 per group
At least one per group

د پن وسیله

د پنونو یا پری بیمونو لرې کولو کې مرسته وکړي.

په هر ګروپ کې 1

چمتو اوسئ… VEX ترلاسه کړئ… لاړ شئ! د PDF کتاب (اختیاري)

د زده کونکو سره لوستل ترڅو دوی د کیسې او تعارفي جوړښت له لارې VEX GO ته معرفي کړي.

1 د مظاهرې موخو لپاره

چمتو اوسئ... ویکس واخلئ... لاړ شئ! د ښوونکي لارښود
ګوګل ډاک / .pptx / .pdf

د VEX GO سره د زده کونکو د معرفي کولو پر مهال د اضافي لارښوونو لپاره
د PDF کتاب سره.

1 د ښوونکي کارولو لپاره

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

مشغول
د زده کونکو سره په ښکیلتیا سره لابراتوار پیل کړئ.

هک

Ask students to describe how to get to a certain landmark in the school building.

یادونه: که زده کونکي د VEX GO سره نوي وي، نو د چمتو کیدو لپاره ... VEX ... GO ترلاسه کړئ! PDF کتاب او د ښوونکو کتاب وکاروئ.
Guide (Google Doc/.pptx/.pdf)
د VEX GO سره د زده کړې او جوړونې سره د هغوی معرفي کول. د دې اضافي فعالیت د ځای په ځای کولو لپاره خپل درسي وخت ته اضافي 10-15 دقیقې اضافه کړئ.

مخکښ پوښتنه

If someone was new to school and didn’t know how to get to the principal’s o ce, what directions would we provide? Why is it important to give speci c instructions? How do we give instructions to the Code Base robot?

جوړول

د کوډ اساس 2.0

لوبه وکړئ
زده کونکو ته اجازه ورکړئ چې معرفي شوي مفکورې وپلټئ.
Part 1 Students will create and start a project that moves the Code Base robot forward for a speci ed distance. Before they start the project, they’ll predict where the Code Base robot will end up using placement markers. Students will then start the project and observe the Code Base robot’s movement. Students will then edit their project to change the distance to see how this a ects the Code Base robot’s movement.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

Mid-Play Break Discuss the Code Base robot’s movement from Play Part 1. Ask the following questions, “did Code Base robot end up where you thought it was going to? How close?” Then, discuss what a drivetrain is, and where to nd it on the Code Base robot. Part 2 Students will create and start a project that moves the Code Base robot in reverse for a speci ed distance. Before they start the project, they’ll predict where the Code Base robot will end up using placement markers. Students will then start the project and observe the Code Base robot’s movement. Students will then edit their project to change the distance to see how this a ects the Code Base robot’s movement. Students will combine forward and backward movements.
شریکول زده کونکو ته اجازه ورکړئ چې بحث وکړي او خپلې زده کړې وښيي.
د خبرو اترو هڅونه
How did you decide where the Code Base robot would be after the project was started? How do you change how far the Code Base robot moves? If you changed the direction that the Code Base robot was facing, would it change your prediction? Why?
مشغول
د مشغولتیا برخه پیل کړئ ACTS هغه څه دي چې ښوونکی به یې کوي او ASKS هغه څه دي چې ښوونکی به یې اسانه کړي.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

ACTS

پوښتي

1. Facilitate a discussion that introduces the concept of directions and why they are important. Ask students to describe how to get to a certain landmark in the school building.
2. As the students give directions, write them at the front of the class.
3. Write a copy of the directions next to the initial directions except mixing up a few directions.
4. Connect the importance of giving directions to the “new student” correctly to the importance of giving explicit, sequenced, and correct directions to robots. Then, show students a prebuilt Code Base robot.

1. If someone was new to school and didn’t know how to get to the principal’s o ce, what directions would we provide? Why is it important to give speci c instructions?
2. What directions could we give the student?
3. Why is it important to give speci c instructions? Would the student be able to get to the location?
4. Now that we understand how to give directions to a new student, how do we give instructions to the Code Base robot?

Getting the Students Ready to Build Let’s learn how to give our Code Base instructions to make it move!
د جوړولو اسانتیا

Instruct Instruct students to join their groups and complete the Robotics Roles & Routines sheet. Use the Suggested Role Responsibilities slide in the Lab Image Slideshow as a guide for students to complete this sheet.
Instruct students to check all their materials to prepare for the Lab challenges. They need to make sure that they have the necessary materials, and everything is charged and the Code Base is built and connected correctly. Give a thumbs up to the teacher when their group is ready to go!
The Code Base will need to be built if it is not already. Model for students the steps in the Connect a VEX GO Brain VEX Library article for your device, to guide students through the connection process.
یادونه: کله چې تاسو لومړی خپل کوډ بیس خپل وسیله سره وصل کړئ، نو په دماغ کې جوړ شوی ګیرو ممکن کیلیبریټ شي، چې د کوډ بیس د یوې شیبې لپاره په خپله حرکت وکړي. دا یو تمه کیدونکی چلند دی، د کیلیبریټ کولو پرمهال د کوډ بیس ته لاس مه ورکوئ.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

ویشل
Distribute a pre-built Code Base 2.0 and a device to launch and use VEXcode GO to each group. Or, distribute build instructions and ask students to build the Code Base if it is not yet built.

د کوډ اساس 2.0

اسانتیاوي
Facilitate preparing the groups for the Play sections by walking them through the steps to check their materials.
ایا بیټرۍ چارج شوې؟
Is the Code Base built properly and not missing any pieces? Are all cables connected to the correct ports? Launch VEXcode GO on your device. Is your Code Base connected to your device?

یار
VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

O er support to groups that need assistance in launching VEXcode GO or preparing their Code Bases.

د ښوونکو ستونزې
Ensure laptops, tablets, and VEX GO Batteries are charged before beginning the Lab. Remind students where the ports are for the motors. Looking at the Brain with the VEX logo oriented at the bottom, the students should plug the left motor into Port 4 and the right motor into Port 1. Ensure that the cables do not cross underneath the robot. Use the Lab 2 Image Slideshow to show where the ports are located. For more information about the VEX GO Brain see the Using the VEX GO Brain article in the VEX Library.

د اسانتیاوو ستراتیژی
Establish a consistent “start up” practice as routine before working with VEX GO. If it is consistently implemented, students will take ownership of this routine and it will foster good practices for independent robotics activities. O er in the moment observation as teams work well, and invite them to share teamwork strategies with the class.
Use the Get Ready…Get VEX…GO! PDF Book and Teacher’s Guide – If students are new to VEX GO, read the PDF book and use the prompts in the Teacher’s Guide (Google Doc/.pptx/.pdf) to facilitate an introduction to building and using VEX GO before beginning the Lab activities. Students can join their groups and gather their VEX GO Kits, and follow along with the building activity within the book as you read.
د زده کونکو د ښکیلتیا د اسانتیا لپاره د ښوونکي لارښود وکاروئ. د دې لپاره چې د VEX GO اتصالات په ډیر کنکریټ یا دقیق ډول تمرکز وکړي، په هره پاڼه کې د شریکولو، ښودلو، یا موندلو پرامپټونو څخه کار واخلئ ترڅو زده کونکو ته فرصت ورکړي چې خپل کیټونه په ډیر ژوره توګه وپیژني.
د ذهن په عادتونو تمرکز کولو لپاره چې د VEX GO سره د جوړونې او زده کړې ملاتړ کوي، لکه استقامت، صبر، او ټیم کار، په هره پاڼه کې د فکر کولو لارښوونې وکاروئ ترڅو زده کونکي د بریالي ګروپ کار او تخلیقي فکر مالتړ لپاره د ذهنیت او ستراتیژیو په اړه خبرو اترو کې ښکیل کړي.
د PDF کتاب او د ښوونکي لارښود سره د تدریسي وسیلې په توګه د کارولو په اړه د نورو معلوماتو لپاره، هرکله چې تاسو په خپل ټولګي کې VEX GO کاروئ، د VEX کتابتون دا مقاله وګورئ.
لوبه وکړئ

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

د چاپ حق © ۲۰۲۴ VEX Robotics, Inc. پاڼه ۱ له ۲۵ څخه

برخه 1 - ګام په ګام

لارښوونه
Instruct students that they will explore how to move their Code Base robot forward! Before they start the project, they’ll predict where the Code Base robot will end up. Watch the animation below to see examples of the Code Base moving forward for di erent distances. In the animation, the Code Base starts in the lower left corner of the Tile and rst drives forward 150mm and stops. It then appears back at the starting location, and drives forward 75mm and stops.

ماډل
Model how to launch VEXcode GO on a device and create a project that moves the Code Base forward with the [Drive for] block.

Model for students the steps of the Open and Save a Project VEX Library article and have them follow the steps to open and save their project.

Forward Instruct students to name their project

Have the students then connect the Brain of their Code Base robot to their device.

Once students have named their project and connected the Brain to their device, they need to follow the steps to con gure for the Code Base robot. Model the steps from the Con gure a Code Base VEX Library article and ensure students can see the Drivetrain blocks in the Toolbox.

Show how to drag in the [Drive for] block into the Workspace and place it under the {When started} block.

Add the [Drive for] block

Change the parameter of the [Drive for] block to 150mm.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

پیرامیټر بدل کړئ
Model for students how to predict how far the Code Base robot will move based on the parameters in the [Drive for] block. Have students place the Code Base in the starting position, then estimate how far the robot will move. They should place a marker where they think the Code Base will stop.
Model for students how to select the `Start’ button in the Toolbar to start the project.

Once the students have observed the behavior, model for students how to go back to their project, edit the parameters of the [Drive for] block from 150mm to another distance, such as 200mm or 250mm. Then, start the project again to see how the change in parameters a ected the movement of the Code Base robot.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

Forward 150 mm

اسانتیاوي
Facilitate a discussion around student observations and the goals of the project by asking the following:
Can you show me using your hands how far you thought the Code Base robot would move before you started the project?
What did you change the distance parameter to and why? How far do you think the Code Base robot will travel now that the distance has been changed?
How did the distance travelled compare to your estimation?
What category of blocks did you use for this project?

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

Discuss the Code Base Robot’s Movement

Remind Remind students that they may have questions when they are creating and starting their project. Remind students that learning new concepts may take multiple tries and encourage them to try again if they are unsuccessful on the rst try.

Ask Ask students to think about how far the Code Base robot would need to move to travel across the classroom. Have students make a connection to why this type of planning is useful in everyday life. Ask students how being able to plan and give accurate directions could be useful for a job? Ask the students if they can think of any jobs where directions are needed?

د لوبې په منځ کې وقفه او ډله ایز بحث

As soon as every group has completed their project, come together for a brief conversation.

Did the Code Base robot end up where you thought it was going to? If not, how close was it to your prediction? How did you edit your project? What new distance did you choose? Did you nd any di culty when changing the distance in the [Drive for] block?

Introduce Drivetrain:
VEX GO – Robot Jobs – Lab 2 – Sewer Robot

Now that we explored how to use VEXcode GO to allow our Code Base robot to drive forward, why do you think there is a “Drivetrain” section of blocks? What do you think a drivetrain is? Can you explain your thinking? Can you show me using gestures where you think the drivetrain is on the Code Base robot? Can you look at the bottom of your Code Base robot and identify where the motors are in this drivetrain, and which wheels they are attached to?

Code Base Robot Drivetrain

برخه 2 - ګام په ګام

لارښوونه
Instruct students that they will explore how to move their Code Base robot forward and in reverse!
To begin, each group should have a device, VEXcode GO, at least one placement marker, and a built Code Base. Watch the animation below to see how the Code Base moves in reverse. In the animation, the Code Base starts in the upper left corner of the tile, and drives in reverse 150mm, then stops. It then returns to the starting position and drives reverse for 75 mm.

ماډل
Model for students how to launch VEXcode GO on a device and rename their project as Reverse. Show students to select `Save As’ to save this project separately from their rst.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

Refer to the steps in the Open and Save a Project article for more information.
Model how to change the parameter on the [Drive for] block to have the Code Base drive in reverse.

Change the parameter (reverse)
Use the same estimation process as in Play Part 1. Have students place the Code Base in the starting position, then estimate how far the robot will move. They should place a marker where they think the Code Base will stop.
Have students start their projects. You may need to remind them of the steps to Connect a VEX GO Brain if connection issues occur.

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

Once the students have observed the behavior of driving in reverse, model for students how to go back to their project. They should then rename their project Forward and Reverse. Refer to the steps in the Open and Save VEX Library article for more information.
Model for students how to add a second [Drive for] block. One [Drive for] block should have the robot driving forward, and the second should have the robot driving in reverse. Model how to edit the parameters of the [Drive for] blocks, and then start the project again to see how the change in parameters a ected the movement of the Code Base robot.

مخکی او شاته

اسانتیاوي
Facilitate a discussion as students are editing their projects and observing the robot’s behavior by asking the following:
Can you show me using your hands how far you thought the Code Base robot would move before you ran the project?
What did you change the distance parameter to and why? How far do you think the Code Base robot will travel now that the distance has been changed?
When you added another [Drive for] block, did you set them to travel the same distance? Do they have to be the same? Why or why not?
If my Code Base robot is coded to drive forward 100 mm, how far would I need to change the distance if I wanted it to go twice as far?

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

Discuss the Code Base Robot’s Movement

Remind Remind students may have questions when they are editing and starting their project. Remind students that learning new concepts may take multiple tries and encourage them to try again if they are unsuccessful at adding and editing the blocks in the project.

Ask Ask students to think about how the Code Base robot would need to move, if they wanted it to drive to the doorway, and then back up to where it started. What types of tasks or jobs could the Code Base robot now perform that it can move forward and backward? Ask students to suggest a task that the Code Base robot could now complete using forward and backward movements.

Optional: Groups may deconstruct their Code Base robot if needed at this point in the experience. They will use the same build in the subsequent labs, so this is a teacher option.
شریکول

خپل د زده کړې بحث د لید لید ته اشاره وکړئ

How did you decide where the Code Base robot would end up after the project was started?

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

How do you change how far the Code Base robot moves? What blocks did you use in your project? Can you explain what they do? Can you show using gestures where the drivetrain is on the Code Base robot?
وړاندوینه
If you changed the direction that the Code Base robot was facing, would it change your prediction of how far it would travel? Why? If you wanted the Code Base robot to travel forward and in reverse the same distance, how would do that in a project? What blocks would you use and what would the distances be?
همکاري کول
How did you work within your group to create and start your project? Did you run into any challenges that your group helped you solve?
د راټولولو په وخت کې خبرتیا ستاسو د محرمیت انتخابونه

VEX GO – Robot Jobs – Lab 2 – Sewer Robot

اسناد / سرچینې

د ویکس ګو لابراتوار ۲ د فاضله اوبو روبوټ [pdf] د کارونکي لارښود
Lab 2 Sewer Robot, Lab 2, Sewer Robot, Robot

حوالې

د کارن لارښود

د VEX GO Lab 2 د ګنډلو روبوټ کارونکي لارښود

د لابراتوار ۲ د فاضله اوبو روبوټ

د محصول معلومات

مشخصات:

د محصول کارولو لارښوونې

Implementing VEX GO STEM Labs:

موخې:

موخې:

د معیارونو سره اړیکې:

ډیری پوښتل شوي پوښتنې (FAQ)

Q: How can I access the Lab Image Slideshows for students?

اسناد / سرچینې

حوالې

یو نظر پریږدئ

ځواب لغوه کړئ