Упатство за корисникот на процесорот за аудио конференции Lumens P300

Access the CamConnect Pro webpage by entering the IP address on
прелистувачот.
Select [Shure P300] from the Device item and enter the IP
address of Shure P300.

Click [Apply] and switch the [Connect] button to connect with
П300.

Connection Camera:

Пребарај за cameras in the LAN and connect the required
камера.

Ensure the resolution of connected cameras matches CamConnect
Pro settings (Default is 1920*1080 60P).

Camera Preset Setting:

Enable [Voice tracking] and set the camera preset based on
sound position.

Video Output Setting:

Select the desired video output and press [Apply]. (Note:
UVC+HDMI may have more latency when device is busy.)
Press [Start Video Output] to display the video output on your
монитор.

ЧПП:

How do I connect multiple cameras to the system?

To connect multiple cameras, search for cameras in the LAN and
ensure their resolution matches the CamConnect Pro settings. Then,
select and connect the desired cameras accordingly.

What is the recommended power input for the product?

The product supports USB Type-C 5V/4A Power input for optimal
performance. Ensure to use a compatible power source meeting these
спецификации.

How can I trigger camera presets based on sound?

To trigger camera presets based on sound, enable [Voice
tracking] and set the camera preset position corresponding to the
Array No. with flashing green light when sound is detected.

„`

View Fullscreen

Shure P300 & CamConnect (AI-Box1) Setting Guide

Цел
· Help users quickly install Lumens CamConnenct Pro and Shure P300.
· These setting tips are the sharing of the key steps summarized after we have installed this system many times.
Авторски права © Lumens. Сите права се задржани.

Prepare · This document uses Shure P300 as an example of setting. · Please install Shure P300, Lumens CamConnect Pro and
Lumens PTZ cameras on the same LAN (same class C network). · For the first installation, you need to prepare a router or
Switcher with DHCP server function.
Авторски права © Lumens. Сите права се задржани.

Хардверски поставки
Авторски права © Lumens. Сите права се задржани.

Поставете Environment
Please connect Cameras, Microphone, and AI-BOX1 in the same LAN.

Camera Camera Camera Camera

Shure P300
Етернет

Shure Mic

Етернет

Етернет Етернет

LAN
Етернет

PoE+ Switch(802.3at)
UVC USB output

Ethernet cable: Cat.5e above level HDMI : HDMI 2.0 USB : Type-C to Type-A
Етернет
PC

Control Ethernet system

HDMI излез

HDMI

Приказ

USB Type-C 5V/4A Power

Авторски права © Lumens. Сите права се задржани.

Откривање на уред

1. Download “Shure Designer 6” software from below hyperlink. https://softwarestore.shure.com/1720/?scope=regi stration&id=z2JNJxxzsM&crel=language
2. Install and run this software. 3. You will get the IP address for Shure devices.

Connection in P300
1. Allocate devices in the Room. 2. Connect microphone to P300. The input channel no. in P300 corresponds to AI-BOX1 Array No.
Авторски права © Lumens. Сите права се задржани.

Поддршка за уред и поставки

Go to CamConnect Pro webpage (Enter

CamConnect Pro IP address on the browser) 1. Pull down the Device item and selects [Shure P300]

2. Enter the IP address of Shure P300, kick blank area

and press [Apply]

3. Switch the [Connect] button to connect with P300.

4. Time to Trigger Preset: This function is the camera

will start moving to the preset point only after a

person’s voice exceeds a certain duration. Range is

0.1sec~5 secs.

5. Back to Home Camera & Back to Home Position:

Press [Set], You can choose which camera you

would like to let it back to Home, and which preset

positon you would to return back.

Камера за поврзување
1. Search camera in the LAN 2. Connect the camera you need. 3. Make sure the resolution of connected cameras is same as CamConnect Pro setting.( Default
is 1920*1080 60P0)

Претходно поставено поставување на камерата
According to the sound position to set the camera preset. 1. Enable the [Voice tracking]. 2. Make sound and check the flashing Array No. of green light. If the green light is flashing on Array No.1, please select the Primary camera to set the preset position you need.
Shure P300 1
Авторски права © Lumens. Сите права се задржани.

Поставка за видео излез
1. Choose Video output you want, and then press [Apply]. (Remind: UVC+HDMI might be more latency when device is busy.) 2. Press [Start Video Output].
Video will output on your display.

Ви благодариме!
MyLumens.com Контактирајте со Lumens
in

Документи / ресурси

Lumens P300 Audio Conferencing Processor [pdf] Упатство за корисникот
AI-Box1, P300, P300 Audio Conferencing Processor, P300, Audio Conferencing Processor, Conferencing Processor, Processor

Референци

Упатство за употреба

P300 процесор за аудио конференции

Информации за производот

Спецификации:

Упатство за употреба на производот:

Откривање на уредот:

Build New Online Room:

Connection in P300:

Поставки за CamConnect Pro: