Lumens P300 Audio Conferencing Processor User Guide

P300 Audio Conferencing Processor

“

Taarifa ya Bidhaa

Vipimo:

• Switcher with DHCP server function
• Inasaidia uunganisho wa Ethernet
• Supports PoE+ Switch (802.3at)
• USB Type-C 5V/4A Power
• Video output options: UVC, HDMI
• Ethernet cable: Cat.5e above level
• HDMI: HDMI 2.0
• USB: Type-C to Type-A

Maagizo ya matumizi ya bidhaa:

Ugunduzi wa Kifaa:

1. Download Shure Designer 6 software from the provided
   kiungo.
2. Install and run the software to obtain the IP address for Shure
   vifaa.

Build New Online Room:

Nenda kwa [File] -> [New online room] to create a new online room
and allocate devices in the room.

Connection in P300:

1. Connect microphone to P300. The input channel number in P300
   corresponds to AI-BOX1 Array No.

Mipangilio ya CamConnect Pro:

1. Access the CamConnect Pro webpage by entering the IP address on
   kivinjari.
2. Select [Shure P300] from the Device item and enter the IP
   address of Shure P300.
3. Click [Apply] and switch the [Connect] button to connect with
   P300.

Connection Camera:

1. Tafuta cameras in the LAN and connect the required
   kamera.
2. Ensure the resolution of connected cameras matches CamConnect
   Pro settings (Default is 1920*1080 60P).

Camera Preset Setting:

1. Enable [Voice tracking] and set the camera preset based on
   sound position.

Video Output Setting:

1. Select the desired video output and press [Apply]. (Note:
   UVC+HDMI may have more latency when device is busy.)
2. Press [Start Video Output] to display the video output on your
   kufuatilia.

Maswali Yanayoulizwa Mara kwa Mara:

How do I connect multiple cameras to the system?

To connect multiple cameras, search for cameras in the LAN and
ensure their resolution matches the CamConnect Pro settings. Then,
select and connect the desired cameras accordingly.

What is the recommended power input for the product?

The product supports USB Type-C 5V/4A Power input for optimal
performance. Ensure to use a compatible power source meeting these
vipimo.

How can I trigger camera presets based on sound?

To trigger camera presets based on sound, enable [Voice
tracking] and set the camera preset position corresponding to the
Array No. with flashing green light when sound is detected.

"`

Shure P300 & CamConnect (AI-Box1) Setting Guide

Kusudi
· Help users quickly install Lumens CamConnenct Pro and Shure P300.
· These setting tips are the sharing of the key steps summarized after we have installed this system many times.
Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Prepare · This document uses Shure P300 as an example of setting. · Please install Shure P300, Lumens CamConnect Pro and
Lumens PTZ cameras on the same LAN (same class C network). · For the first installation, you need to prepare a router or
Switcher with DHCP server function.
Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Mipangilio ya Vifaa
Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Weka Mazingira
Please connect Cameras, Microphone, and AI-BOX1 in the same LAN.

Camera Camera Camera Camera

Shure P300
Ethaneti

Shure Mic

Shure Mic

Ethaneti

Ethaneti

Ethaneti

Ethaneti ya Ethaneti

LAN
Ethaneti

PoE+ Switch(802.3at)
UVC USB output

Ethernet cable: Cat.5e above level HDMI : HDMI 2.0 USB : Type-C to Type-A
Ethaneti
PC

Control Ethernet system

Pato la HDMI

HDMI

Onyesho

USB Type-C 5V/4A Power

Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Ugunduzi wa Kifaa

1. Download “Shure Designer 6” software from below hyperlink. https://softwarestore.shure.com/1720/?scope=regi stration&id=z2JNJxxzsM&crel=language
2. Install and run this software. 3. You will get the IP address for Shure devices.

Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Build new online room
Nenda kwa [File] -> [New online room] Copyright © Lumens. All rights reserved.

Connection in P300
1. Allocate devices in the Room. 2. Connect microphone to P300. The input channel no. in P300 corresponds to AI-BOX1 Array No.
Hakimiliki © Lumens. Haki zote zimehifadhiwa.

CamConnect Pro settings
Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Kifaa cha Usaidizi na Mipangilio

Go to CamConnect Pro webpage (Enter

CamConnect Pro IP address on the browser) 1. Pull down the Device item and selects [Shure P300]

1

2. Enter the IP address of Shure P300, kick blank area

2

and press [Apply]

3. Switch the [Connect] button to connect with P300.

3

4. Time to Trigger Preset: This function is the camera

will start moving to the preset point only after a

4

person’s voice exceeds a certain duration. Range is

5

0.1sec~5 secs.

2

5. Back to Home Camera & Back to Home Position:

Press [Set], You can choose which camera you

would like to let it back to Home, and which preset

positon you would to return back.

5

Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Kamera ya Uunganisho
1. Search camera in the LAN 2. Connect the camera you need. 3. Make sure the resolution of connected cameras is same as CamConnect Pro setting.( Default
is 1920*1080 60P0)

3

1

2

Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Kuweka Mapema kwa Kamera
According to the sound position to set the camera preset. 1. Enable the [Voice tracking]. 2. Make sound and check the flashing Array No. of green light. If the green light is flashing on Array No.1, please select the Primary camera to set the preset position you need.
Shure P300 1
Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Mpangilio wa pato la video
1. Choose Video output you want, and then press [Apply]. (Remind: UVC+HDMI might be more latency when device is busy.) 2. Press [Start Video Output].
Video will output on your display.

1 2
Hakimiliki © Lumens. Haki zote zimehifadhiwa.

Asante!
MyLumens.com Wasiliana na Lumens
in

Nyaraka / Rasilimali

Lumens P300 Audio Conferencing Processor [pdf] Mwongozo wa Mtumiaji AI-Box1, P300, P300 Audio Conferencing Processor, P300, Audio Conferencing Processor, Conferencing Processor, Processor

Marejeleo

• Mwongozo wa Mtumiaji