P300 hljóðfundarvinnslueining
“
Upplýsingar um vöru
Tæknilýsing:
- Switcher with DHCP server function
- Styður Ethernet tengingu
- Supports PoE+ Switch (802.3at)
- USB Type-C 5V/4A Power
- Video output options: UVC, HDMI
- Ethernet cable: Cat.5e above level
- HDMI: HDMI 2.0
- USB: Type-C to Type-A
Notkunarleiðbeiningar fyrir vöru:
Uppgötvun tækis:
- Download Shure Designer 6 software from the provided
tengil. - Install and run the software to obtain the IP address for Shure
tæki.
Build New Online Room:
Farðu á [File] -> [New online room] to create a new online room
and allocate devices in the room.
Connection in P300:
- Connect microphone to P300. The input channel number in P300
corresponds to AI-BOX1 Array No.
CamConnect Pro Stillingar:
- Access the CamConnect Pro webpage by entering the IP address on
vafranum. - Select [Shure P300] from the Device item and enter the IP
address of Shure P300. - Click [Apply] and switch the [Connect] button to connect with
P300.
Connection Camera:
- Leitaðu að cameras in the LAN and connect the required
myndavél. - Ensure the resolution of connected cameras matches CamConnect
Pro settings (Default is 1920*1080 60P).
Camera Preset Setting:
- Enable [Voice tracking] and set the camera preset based on
sound position.
Video Output Setting:
- Select the desired video output and press [Apply]. (Note:
UVC+HDMI may have more latency when device is busy.) - Press [Start Video Output] to display the video output on your
fylgjast með.
Algengar spurningar:
How do I connect multiple cameras to the system?
To connect multiple cameras, search for cameras in the LAN and
ensure their resolution matches the CamConnect Pro settings. Then,
select and connect the desired cameras accordingly.
What is the recommended power input for the product?
The product supports USB Type-C 5V/4A Power input for optimal
performance. Ensure to use a compatible power source meeting these
forskriftir.
How can I trigger camera presets based on sound?
To trigger camera presets based on sound, enable [Voice
tracking] and set the camera preset position corresponding to the
Array No. with flashing green light when sound is detected.
“`
Shure P300 & CamConnect (AI-Box1) Setting Guide
Tilgangur
· Help users quickly install Lumens CamConnenct Pro and Shure P300.
· These setting tips are the sharing of the key steps summarized after we have installed this system many times.
Höfundarréttur © Lumens. Allur réttur áskilinn.
Prepare · This document uses Shure P300 as an example of setting. · Please install Shure P300, Lumens CamConnect Pro and
Lumens PTZ cameras on the same LAN (same class C network). · For the first installation, you need to prepare a router or
Switcher with DHCP server function.
Höfundarréttur © Lumens. Allur réttur áskilinn.
Vélbúnaðarstillingar
Höfundarréttur © Lumens. Allur réttur áskilinn.
Settu upp umhverfi
Please connect Cameras, Microphone, and AI-BOX1 in the same LAN.
Camera Camera Camera Camera
Shure P300
Ethernet
Shure Mic
Shure Mic
Ethernet
Ethernet
Ethernet
Ethernet Ethernet
LAN
Ethernet
PoE+ Switch(802.3at)
UVC USB output
Ethernet cable: Cat.5e above level HDMI : HDMI 2.0 USB : Type-C to Type-A
Ethernet
PC
Control Ethernet system
HDMI útgangur
HDMI
Skjár
USB Type-C 5V/4A Power
Höfundarréttur © Lumens. Allur réttur áskilinn.
Uppgötvun tækis
1. Download “Shure Designer 6” software from below hyperlink. https://softwarestore.shure.com/1720/?scope=regi stration&id=z2JNJxxzsM&crel=language
2. Install and run this software. 3. You will get the IP address for Shure devices.
Höfundarréttur © Lumens. Allur réttur áskilinn.
Build new online room
Farðu á [File] -> [New online room]
Copyright © Lumens. All rights reserved.
Connection in P300
1. Allocate devices in the Room. 2. Connect microphone to P300. The input channel no. in P300 corresponds to AI-BOX1 Array No.
Höfundarréttur © Lumens. Allur réttur áskilinn.
CamConnect Pro settings
Höfundarréttur © Lumens. Allur réttur áskilinn.
Stuðningstæki og stillingar
Go to CamConnect Pro webpage (Enter
CamConnect Pro IP address on the browser) 1. Pull down the Device item and selects [Shure P300]
1
2. Enter the IP address of Shure P300, kick blank area
2
and press [Apply]
3. Switch the [Connect] button to connect with P300.
3
4. Time to Trigger Preset: This function is the camera
will start moving to the preset point only after a
4
person’s voice exceeds a certain duration. Range is
5
0.1sec~5 secs.
2
5. Back to Home Camera & Back to Home Position:
Press [Set], You can choose which camera you
would like to let it back to Home, and which preset
positon you would to return back.
5
Höfundarréttur © Lumens. Allur réttur áskilinn.
Tenging myndavél
1. Search camera in the LAN 2. Connect the camera you need. 3. Make sure the resolution of connected cameras is same as CamConnect Pro setting.( Default
is 1920*1080 60P0)
3
1
2
Höfundarréttur © Lumens. Allur réttur áskilinn.
Forstillingar myndavélar
According to the sound position to set the camera preset. 1. Enable the [Voice tracking]. 2. Make sound and check the flashing Array No. of green light. If the green light is flashing on Array No.1, please select the Primary camera to set the preset position you need.
Shure P300 1
Höfundarréttur © Lumens. Allur réttur áskilinn.
Stilling myndbandsúttaks
1. Choose Video output you want, and then press [Apply]. (Remind: UVC+HDMI might be more latency when device is busy.) 2. Press [Start Video Output].
Video will output on your display.
1 2
Höfundarréttur © Lumens. Allur réttur áskilinn.
Þakka þér fyrir!
MyLumens.com Hafðu samband við Lumens
in
Skjöl / auðlindir
 |
Lumens P300 Audio Conferencing Processor [pdfNotendahandbók AI-Box1, P300, P300 Audio Conferencing Processor, P300, Audio Conferencing Processor, Conferencing Processor, Processor |