د P300 آډیو کنفرانس پروسیسر
“
د محصول معلومات
مشخصات:
- Switcher with DHCP server function
- د ایترنیټ ارتباط ملاتړ کوي
- Supports PoE+ Switch (802.3at)
- USB Type-C 5V/4A Power
- Video output options: UVC, HDMI
- Ethernet cable: Cat.5e above level
- HDMI: HDMI 2.0
- USB: Type-C to Type-A
د محصول کارولو لارښوونې:
د وسیلې کشف:
- Download Shure Designer 6 software from the provided
هایپر لینک - Install and run the software to obtain the IP address for Shure
وسایل
Build New Online Room:
ورتګ [File] -> [New online room] to create a new online room
and allocate devices in the room.
Connection in P300:
- Connect microphone to P300. The input channel number in P300
corresponds to AI-BOX1 Array No.
د CamConnect پرو ترتیبات:
- Access the CamConnect Pro webpage by entering the IP address on
براوزر - Select [Shure P300] from the Device item and enter the IP
address of Shure P300. - Click [Apply] and switch the [Connect] button to connect with
P300.
Connection Camera:
- لټون cameras in the LAN and connect the required
کمره - Ensure the resolution of connected cameras matches CamConnect
Pro settings (Default is 1920*1080 60P).
Camera Preset Setting:
- Enable [Voice tracking] and set the camera preset based on
sound position.
Video Output Setting:
- Select the desired video output and press [Apply]. (Note:
UVC+HDMI may have more latency when device is busy.) - Press [Start Video Output] to display the video output on your
څارنه
FAQ:
How do I connect multiple cameras to the system?
To connect multiple cameras, search for cameras in the LAN and
ensure their resolution matches the CamConnect Pro settings. Then,
select and connect the desired cameras accordingly.
What is the recommended power input for the product?
The product supports USB Type-C 5V/4A Power input for optimal
performance. Ensure to use a compatible power source meeting these
مشخصات
How can I trigger camera presets based on sound?
To trigger camera presets based on sound, enable [Voice
tracking] and set the camera preset position corresponding to the
Array No. with flashing green light when sound is detected.
"`
Shure P300 & CamConnect (AI-Box1) Setting Guide
موخه
· Help users quickly install Lumens CamConnenct Pro and Shure P300.
· These setting tips are the sharing of the key steps summarized after we have installed this system many times.
د چاپ حق © Lumens. ټول حقونه خوندي دي.
Prepare · This document uses Shure P300 as an example of setting. · Please install Shure P300, Lumens CamConnect Pro and
Lumens PTZ cameras on the same LAN (same class C network). · For the first installation, you need to prepare a router or
Switcher with DHCP server function.
د چاپ حق © Lumens. ټول حقونه خوندي دي.
د هارډویر ترتیبات
د چاپ حق © Lumens. ټول حقونه خوندي دي.
د چاپیریال تنظیم کول
Please connect Cameras, Microphone, and AI-BOX1 in the same LAN.
Camera Camera Camera Camera
Shure P300
ایترنیټ
Shure Mic
Shure Mic
ایترنیټ
ایترنیټ
ایترنیټ
ایترنیټ ایترنیټ
LAN
ایترنیټ
PoE+ Switch(802.3at)
UVC USB output
Ethernet cable: Cat.5e above level HDMI : HDMI 2.0 USB : Type-C to Type-A
ایترنیټ
PC
Control Ethernet system
د HDMI محصول
HDMI
ښودل
USB Type-C 5V/4A Power
د چاپ حق © Lumens. ټول حقونه خوندي دي.
د وسیلې کشف
1. Download “Shure Designer 6” software from below hyperlink. https://softwarestore.shure.com/1720/?scope=regi stration&id=z2JNJxxzsM&crel=language
2. Install and run this software. 3. You will get the IP address for Shure devices.
د چاپ حق © Lumens. ټول حقونه خوندي دي.
Build new online room
ورتګ [File] -> [New online room]
Copyright © Lumens. All rights reserved.
Connection in P300
1. Allocate devices in the Room. 2. Connect microphone to P300. The input channel no. in P300 corresponds to AI-BOX1 Array No.
د چاپ حق © Lumens. ټول حقونه خوندي دي.
CamConnect Pro settings
د چاپ حق © Lumens. ټول حقونه خوندي دي.
د وسیلې او تنظیماتو ملاتړ کول
Go to CamConnect Pro webpage (Enter
CamConnect Pro IP address on the browser) 1. Pull down the Device item and selects [Shure P300]
1
2. Enter the IP address of Shure P300, kick blank area
2
and press [Apply]
3. Switch the [Connect] button to connect with P300.
3
4. Time to Trigger Preset: This function is the camera
will start moving to the preset point only after a
4
person’s voice exceeds a certain duration. Range is
5
0.1sec~5 secs.
2
5. Back to Home Camera & Back to Home Position:
Press [Set], You can choose which camera you
would like to let it back to Home, and which preset
positon you would to return back.
5
د چاپ حق © Lumens. ټول حقونه خوندي دي.
د پیوستون کیمره
1. Search camera in the LAN 2. Connect the camera you need. 3. Make sure the resolution of connected cameras is same as CamConnect Pro setting.( Default
is 1920*1080 60P0)
3
1
2
د چاپ حق © Lumens. ټول حقونه خوندي دي.
د کیمرې پری سیټ ترتیب
According to the sound position to set the camera preset. 1. Enable the [Voice tracking]. 2. Make sound and check the flashing Array No. of green light. If the green light is flashing on Array No.1, please select the Primary camera to set the preset position you need.
Shure P300 1
د چاپ حق © Lumens. ټول حقونه خوندي دي.
د ویډیو تولید ترتیب
1. Choose Video output you want, and then press [Apply]. (Remind: UVC+HDMI might be more latency when device is busy.) 2. Press [Start Video Output].
Video will output on your display.
1 2
د چاپ حق © Lumens. ټول حقونه خوندي دي.
له تاسو مننه!
MyLumens.com د Lumens سره اړیکه ونیسئ
in
اسناد / سرچینې
 |
Lumens P300 Audio Conferencing Processor [pdf] د کارونکي لارښود AI-Box1, P300, P300 Audio Conferencing Processor, P300, Audio Conferencing Processor, Conferencing Processor, Processor |