BTR1 ADVANCED Intercom Single Unit
“
Product Specifications
- Frequency (GHz): 2.402 – 2.480
- Max Power (mW): 100
Product Usage Instructions
Pairings
To carry out any pairing, you need to access Settings. If the
Control button is pressed less than 7 seconds, the device will turn
on instead of accessing Settings. Should this happen, repeat the
procedure.
Phone/GPS/TFT Pairing
- Status: Settings (steady red led)
- Press VOL+ for 3 seconds
- Select BTR1 Adv. in your phone, GPS, or TFT
- Confirmation (1 sec.)
Midland Intercom Pairing
- Status: Settings (steady red led)
- Press for 3 seconds (You can use any key)
- Confirmation (1 sec.)
Other Brand Intercom Pairing (Universal Intercom)
- Status: Settings (steady red led)
- Press for 3 seconds (You can use any key)
- Confirmation (1 sec.)
- Exit Settings mode (Press the Control button twice)
Pairing 4 Units in Conference
The Conference allows simultaneous communication among Midland
units. Units must be paired in a chain configuration.
Bluetooth Pairings Reset
- Status: Settings (steady red led)
- Press together for 3 seconds
- Confirmation (1 sec.)
- Exit the Settings mode (Press the Control button twice)
Operating Modes
- Intercom Mode: Communicate with another
device. - Phone Mode: For phone calls or managing
music. - FM Radio Mode: Listen to radio, search, and
store stations.
Select the Operating Mode
Status: unit on
Frequently Asked Questions (FAQ)
How do I reset Bluetooth pairings?
To reset Bluetooth pairings, go to Settings, press together for
3 seconds, wait for the confirmation beep, and exit the Settings
mode by pressing the Control button twice.
How do I pair my BTR1 Advanced with other devices?
To pair your BTR1 Advanced with other devices, access Settings,
follow the specific pairing instructions for each type of device
(phone/GPS/TFT, intercoms, etc.), and ensure proper confirmation
signals for successful pairing.
Can I pair multiple devices with the BTR1 Advanced
simultaneously?
Yes, you can pair multiple devices with the BTR1 Advanced
according to the specified pairing procedures provided in the user
manual. However, be cautious as a new pairing on the same button
will overwrite the previous one.
“`
POCKET GUIDE ENGLISH
BTR1 ADVANCED
HIGH DEFINITION SOUND BY
ON/OFF
DESCRIPTION OF BUTTONS Vol + Vol –
Led
Control Button
Led
Up Button
Down Button
SWITCH ON
3″
SWITCH OFF
3″
Press for 3 seconds Beep Flashes
Press together for 3 sec. Flashes
Notification jingle
PAIRINGS
DESCRIPTION OF BUTTONS
Main pairing: Phone, TFT, GPS (Mono/Stereo)
Secondary pairing wih: GPS, 2nd phone (Mono)
CONFERENCE
Pairing with: MIdland Intercom, OBI,
Universal Intercom
Pairing with: MIdland Intercom, OBI,
Universal Intercom (VOX, Music share)
CONFERENCE
Pairing with: MIdland Intercom, OBI,
Universal Intercom
To carry out any pairing, you need to access Settings. If the Control button is pressed less than 7 seconds, the device will turn on instead of accessing Settings. Should this happen, repeat the procedure.
ACCESS SETTINGS Status: device off
7″
Press 7 seconds Beep Flashes Steady
PAIRINGS
PHONE/GPS/TFT PAIRING Status: Settings (steady red led)
Press VOL+ for 3 seconds
Beep
3″
Flashes
Select BTR1 Adv. in your phone, GPS or TFT
Beep
Confirmation (1 sec.)
Note: to pair a second device in mono audio, repeat the same procedure but press VOL-.
MIDLAND INTERCOM PAIRING Status: Settings (steady red led)
OBI INTERCOM PAIRING Status: Settings (steady red led)
3″ Press for 3 seconds (You can use any key)
Flashes
Confirmation (1 sec.)
OBI intercom (Cardo…)
Follow the pairing procedure with the intercom device
(see instructions of this device)
OTHER BRAND INTERCOM PAIRING (UNIVERSAL INTERCOM)
Status: Settings (steady red led)
3″
Press for 3 seconds (You can use any key)
Flashes
3″
Press for 3 seconds (You can use any key)
Flashes
Confirmation (1 sec.)
Confirmation (1 sec.)
Exit Settings mode (Press the Control button twice)
3″ Press for 3 seconds (You can use any key)
Flashes
Confirmation (1 sec.)
Follow the phone pairing procedure
(see instructions of this device)
Attention: a new pairing on the same button overwrites the previous one
PAIRINGS
PAIRING 4 UNITS IN CONFERENCE Status: Settings (steady red led)
3″
1
3″
2
3″
3
4
Note: the Conference allows the simultaneous communication amongs Midland units. Units must be paired in a “chain” configuration. Down Button of Unit 1 with Up Button of Unit 2 Down Button of Unit 2 with Up Button of Unit 3 Down Button of Unit 3 with Up Button of Unit 4
BLUETOOTH PAIRINGS RESET Status: Settings (steady red led)
Press together for 3 seconds
3″
Beep
Confirmation (1 sec.)
Steady
Exit the Settings mode (Press the Control button twice)
EXIT SETTINGS MODE INTERRUPT PAIRING
Status: Settings (steady red led)
Press twice
Blinking changes
x2
Frequency (GHz) 2.402 – 2.480
Max power (mW) 100
Go to our website midlandeurope.com, download the complete manual and the
BT Updater software.
Customize your intercom and discover all the functions with the Midland Connect. Download it here:
OPERATING MODES
A. Intercom Mode: to communicate with another device. B. Phone Mode: for phone calls or for managing music. C. FM Radio Mode: to listen to radio, search and store stations. Note: Phone mode and Intercom mode are enabled only when your intercom is paired to other devices.
SELECT THE OPERATING MODE Status: unit on
INTERCOM MODE
FUNCTIONS DESCRIPTION Press once the keys to activate:
Control button – Rider 1 (Passenger or favourite rider) (Midland/OBI/Universal Intercom)
Up button – Rider 2: (Midland/OBI/Universal Intercom)
Down button – Rider 3: (Midland/OBI/Universal Intercom)
3″
INTERCOM MODE –> CONFERENCE
PHONE MODE FM RADIO MODE Press for 3 seconds to change mode or keep pressed to scroll quickly
Operating mode status Note: By pressing briefly Vol + and Vol – together, BTR1 Advanced communicates the selected operating mode.
SHORTCUT: in Intercom mode press twice the buttons for the phone functionalities.
OPEN/CLOSE INTERCOM MANUALLY Status: Intercom mode
Press once the button used for the Midland/OBI pairing
Beep
x1
Flashes
Note: to communicate with Rider 2-3 repeat the procedure by pressing Up (Rider 2) / Down (Rider 3).
OPERATING MODES
INTERCOM MODE OPEN/CLOSE UNIVERSAL INTERCOM Status: Intercom mode
Press once the button used for the Universal Intercom pairing
Beep
ACTIVATE/DEACTIVATE VOX Status: in all modes the intercom communication MUST be closed)
Press for 7 seconds
x1
Flashes
7″
Note: to open/close the audio from a different brand device, use the voice call command (for some models it is necessary to send the voice call twice)
Voice announcement
OPEN/CLOSE INTERCOM BY VOICE Status: in all modes
Say “Hi”
Voice announcement
Flashes
Silent for 1min, intercom closes
Beep Note: the voice activation is possible only with an intercom paired to the Control button-Rider 1 (VOX must be active)
ENABLE/DISABLE CONFERENCE Status: in all modes (audio must be closed)
To enable/disable Conference, keep pressed for 3 seconds at the same time on every paired intercom
3″
Voice announcement
Connection status
Note: in Conference mode, the deviced paired with Vol+/Vol- are temporarily dosconnected.
OPERATING MODES
INTERCOM MODE OPEN/CLOSE CONFERENCE Status: Conference
Press once opens/closes Conference with the unit paired to Down button
x1
Press once opens/closes Conference with the unit paired to Up button
x1
Press once opens automatically Conference to all paired units
x1
PHONE MODE DESCRIZIONE FUNZIONI Press once the buttons to activate:
Play/Pause
(Phone on Vol+) · Call · Answer · End · Next song
(Phone on Vol-) · Call · Answer · End · Previous track
SHORTCUT: in Phone mode press twice for the Intercom functionalities.
TO MAKE A CALL Status: Phone mode (no audio active)
Press once
Voice Assistant Response (Google assistant, Siri)
Give instructions
x1
Call
Note: if your phone is paired with Vol-, press the Down button.
OPERATING MODES
PHONE MODE
TO ANSWER/END/REJECT A CALL Status: all modes
x1 Press once any key to answer/end a call
3″ Press for 3 sec, to reject a call
Note: if your phone is paired with Vol-, press the Down button.
MUSIC Status: phone mode
Select Music App
x1 Press once Play/Pause
MUSIC SHARE Status: all modes
Select Music App
Open Midland intercom (manually or by VOX)
x1 Press once Next track
x1 Press once Previous track
3″
Press for 3 sec.
Voice announcement
RADIO MODE
FUNCTION DESCRIPTION Press once the buttons:
FM Radio On/Mute
Seek radio station forward Seek radio station backward
SHORTCUT: in Radio mode press twice the buttons for the Intercom functionalities.
FM RADIO Status: radio mode
x1 Press once On/Mute
x1 Press once station forward
3″ Press for 3 sec. memory forward
x1 Press once station backward
3″ Press for 3 sec. memory backward
Note: with FM radio mute, press once the Up or Down buttons to activate the voice call.
Documents / Resources
![]() |
MIDLAND BTR1 ADVANCED Intercom Single Unit [pdf] User Guide BTR1 ADVANCED Intercom Single Unit, BTR1 ADVANCED, Intercom Single Unit, Single Unit |