EKFÄNN Lighted Mirror
Safety Instructions
- [Warning] For indoor use only.
- Regularly check the cord, transformer, and all other parts for damage. Do not use if any part is damaged.
- Keep these instructions for future use.
- The light source of this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire must be replaced.
- This product is not intended for children due to its electrical components. IKEA recommends that only adults handle recharging.
- Regularly examine the cord, plug, enclosure, and other parts for damage. Do not use the product with the charger if any damage is found.
- Only connect to SELV (Safety Extra Low Voltage) power sources.
Product Information
The EKFÄNN is a lighted mirror designed for indoor use.
Assembly and Setup
Battery Installation
- Open the battery compartment cover.
- Insert 3 x AA batteries, observing the correct polarity (+/-).
- Close the battery compartment cover.
- Note: Batteries are sold separately. IKEA recommends LADDA rechargeable batteries HR06 AA 1.2V.
Power Connection
- The USB-C cable and USB charger are sold separately.
- Connect the product via the USB-C port to a compatible power source (5V DC Min 1A, SELV).
Operation
Charging Indicator
The LED light on the base of the mirror indicates the battery status:
- Flashing green light: Charging in progress.
- Steady green light: Charging complete.
- Flashing red light: Low battery.
- The product must only be charged indoors.
Light Control
- Press the button on the base to turn the light on or off.
- Press and hold the button to adjust the brightness (dimming).
- Double-press the button to cycle through color temperature settings: 2700K (warm white), 4000K (neutral white), 6500K (cool white).
Mirror Adjustment
The mirror can be tilted and rotated to achieve the desired viewing angle.
