EKFÄNN Table Mirror with Integrated Lighting
IKEA of Sweden
Important Safety Instructions
For indoor use only.
Regularly check the cord, transformer, and all other parts for damage. Do not use the product if any part is damaged. Keep these instructions for future use.
The light source of this luminaire is not replaceable; when it reaches its end of life, the entire luminaire must be replaced.
This product is not intended for children due to its electrical components. IKEA recommends that only adults handle recharging. Regularly examine the cord, plug, enclosure, and other parts for damage. If any part is damaged, do not use the product with the charger. Only connect to SELV (Safety Extra Low Voltage).
Product Overview
The EKFÄNN is a table mirror designed for indoor use, featuring integrated, dimmable LED lighting. It is powered by 3 AA batteries (sold separately) and can also be charged via USB-C.
Assembly
The mirror requires simple assembly:
- Attach the stand to the base using the provided screw and screwdriver. [Diagram: ? + ? → Base]
- Connect the mirror head to the stand. It will click into place. [Diagram: Mirror head connecting to stand with '? Click!']
Powering and Charging
Battery Power:
- The mirror requires 3 x AA batteries (not included).
- Open the battery compartment in the base. Insert 3 x AA batteries (+/-). Close the compartment. [Diagram: ? + ? + ? → Compartment]
- Note: Do not dispose of batteries in household waste. [Symbol: ?️]
USB Charging:
- The mirror can be charged using a USB-C cable and a compatible power adapter (5V DC Min 1A, SELV). Both are sold separately.
- Connect the USB-C cable to the port on the mirror base and to the power adapter. [Diagram: ? USB-C → Mirror Base]
- The product should only be charged indoors.
Using Your EKFÄNN Mirror
The LED light on the mirror's base indicates the battery status and charging progress:
- Flashing Green Light: Charging in progress.
- Steady Green Light: Charging complete.
- Flashing Red Light: Low battery.
Adjusting Light:
- Brightness: Press and hold the button on the base to adjust the brightness. [Diagram: ? Brightness adjustment]
- Color Temperature: Press and hold to cycle through color temperatures (2700K, 4000K, 6500K). [Diagram: ? Color temperature adjustment]
Mirror Adjustment: Adjust the mirror head angle. [Diagram: Mirror head tilt/rotate]
