EKFÄNN
IKEA
Important Safety Instructions
- For indoor use only.
- Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.
- Important information! Keep these instructions for future use.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
- This product is not intended for children due to the content of electrical components. IKEA recommends that only adults should handle the recharging. Regularly examine for damage of cord, plug, enclosure, and other parts. In the event of such damage, the product must not be used with the charger.
- Only to be supplied at SELV (Safety Extra Low Voltage).
Assembly Instructions
Secure the base to the stand. Use a [screwdriver] to fasten the screws. Ensure correct orientation of parts.
Visual: Shows a person using a screwdriver on the base of the mirror stand.
Insert the stand into the base. A [click sound] indicates it is properly seated.
Visual: Shows the stand being pushed into the base, with a close-up indicating a click mechanism.
Attach the mirror assembly to the stand. Use a [screwdriver] to secure the mirror to the stand.
Visual: Shows the mirror head being attached to the stand and secured with screws.
Battery Installation
Open the battery compartment cover by pressing the indicated tab.
Visual: Shows a finger pressing a tab to open the battery compartment.
Insert 3 AA batteries, observing correct polarity (+/-). Ensure batteries are placed correctly as shown.
Visual: Shows 3 AA batteries being inserted into the compartment with correct polarity markings. A crossed-out bin symbol indicates proper disposal is required.
Replace the battery compartment cover.
Visual: Shows the battery compartment cover being closed.
Batteries are sold separately. IKEA recommends LADDA rechargeable battery HR06 AA 1.2V. 3 pieces are required.
Charging
USB-C cable and USB charger are sold separately.
Connect the USB-C cable to the port on the mirror's base.
Visual: Shows a USB-C cable being plugged into the mirror base.
Connect the other end of the USB-C cable to a power source, such as a USB charger or a computer. The power source should be 5V DC Min 1A, SELV.
Visual: Shows USB chargers and laptops as examples of power sources.
The LED light on the mirror's base indicates the battery level:
- Green light flashing: Charging in progress. ⚡
- Green light steady on: Charging complete. ✔️
- Red light flashing: Low battery. ?
The product may only be charged indoors.
Usage and Light Control
To turn the light on/off, press and hold the button on the base for 2 seconds.
Visual: Shows a finger pressing the button on the base for 2 seconds.
To adjust the brightness, press and hold the button, or tap it. The light intensity will change.
Visual: Shows the light intensity changing from dim to bright.
To adjust the color temperature, press the button. Cycle through different color temperatures: 2700K (warm white), 4000K (neutral white), and 6500K (cool white).
Visual: Shows a thermometer icon with temperature scales indicating 2700K, 4000K, and 6500K.
The mirror can be tilted and swiveled to the desired position.
Visual: Shows the mirror being adjusted in angle and rotation.
Caution: Do not look directly into the light source. ?❌
