EKFÄNN
by IKEA
Important Safety Instructions
For indoor use only.
Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.
Important information! Keep these instructions for future use.
CAUTION!
The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water.
Cleaning
Use a damp cloth, never a strong cleaning agent.
WARNING
Deviation from the assembly instructions may result in a risk of fire or electric shock. ⚠️
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note on FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SAVE THESE INSTRUCTIONS
Assembly Instructions
The assembly process involves a few simple steps:
- Step 1: Secure the base. Insert a screw into the designated hole on the base and tighten it using a screwdriver. ?❌
- Step 2: Attach the mirror stem. Insert the stem of the mirror unit into the base. You should hear a "Click!" when it is properly seated.
- Step 3: Finalize the mirror unit attachment. Secure the mirror unit to the base using a screw, tightening it with a screwdriver. ?
Power and Battery
Battery: Batteries are sold separately. IKEA recommends LADDA rechargeable battery HR6 AA 1.2V. 3 pieces are required. ?
Power Connection: A USB-C cable and USB power adapter are sold separately. Use a 5V DC Min 1A power source (Class 2). The device can be powered via a USB port on a computer (5V DC Min 1A).
LED Indicator Status:
- Green LED pulsing: Charging in progress.
- Green LED steady on: Charging complete.
- Red LED pulsing: Low battery reminder.
The lamp may only be charged indoors.
Operation
Power On/Off and Brightness: Press the button on the base to turn the light on or off. Pressing the button multiple times cycles through three brightness levels (indicated by '3x' and radiating light). ?
Color Temperature Adjustment: Slide the control on the base to adjust the brightness. Slide again to change the color temperature. The available color temperatures are:
- 2700K (Warm White)
- 4000K (Neutral White)
- 6500K (Cool White)
Mirror Adjustment: The mirror head can be rotated and tilted to your desired position. ?
