Signature Design by Ashley D469-13 Assembly Instructions

Important Safety Notice

Read carefully before beginning assembly.

Always use proper tools.
Follow the assembly steps in order. Do not skip any steps.
Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
Keep the instructions for future reference.
When assembling products that have glass or mirrors, be very careful handling them, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
When assembling products with electric cords (lamps, light, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the electrical cord during assembly.
When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves; use a step ladder.
Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.

Disclaimer: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.

Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.

Parts List

The following parts are included for assembly:

Part A: 1 piece (Base panel or main surface)
Part B: 1 piece (Frame component)
Part C: 2 pieces (Frame components)
Part D: 4 pieces (Fasteners, specified as 1/4" x 15mm)
Part E: 6 pieces (Fasteners, specified as 1/4" x 40mm)
Part F: 1 piece (Likely an assembly tool or specific fastener)

Assembly Steps

Important Assembly Notes:

Unit should be assembled by two or more people.
Do not tighten any bolts until all bolts have been started.

Step 1:

Connect Part B to Part A. Then, attach the two Part C pieces to the structure. Fasteners (likely Part D and Part F) are used to secure these connections. A detailed view shows the use of fastener F with a bolt.

Step 2:

Turn the partially assembled unit over. Attach Part A (likely the tabletop) to the frame structure. Fasteners (likely Part E and Part F) are used for this step. A detailed view shows the use of fastener F with bolts.

Step 3:

The main structure of the table is now assembled. A detailed view shows fasteners (likely Part D) being used to secure the base or legs of the table.

Support and Replacement Parts

For replacement parts, please contact:

Email: RTAParts@ashleyfurniture.com
Website: www.ashleyfurniture.parts
Phone: 1-844-966-0809

	Signature Design by Ashley D647-13 Counter Height Dining Table Assembly Instructions Official assembly instructions for the Signature Design by Ashley D647-13 Counter Height Dining Room Drop Leaf Table. Includes safety warnings, parts list, and step-by-step assembly guide.
	Signature Design by Ashley D320-223 Dining Set Assembly Instructions Concise and SEO-optimized assembly instructions for the Signature Design by Ashley D320-223 dining set, including a table and three bar stools. Features safety guidelines, parts list, and step-by-step assembly.
	Signature Design by Ashley D335-15 Round Drop Leaf Dining Table Assembly Instructions Assembly instructions and safety guidelines for the Signature Design by Ashley D335-15 Round Drop Leaf Dining Table. Includes part identification and step-by-step assembly guidance.
	Signature Design by Ashley D335-15 Woodanville Round Drop Leaf Dining Table Assembly Instructions Comprehensive assembly guide for the Signature Design by Ashley D335-15 Woodanville Round Drop Leaf Dining Table. Includes essential safety warnings, a detailed parts list, and step-by-step instructions for proper furniture assembly.
	Signature Design by Ashley D629-32 Table Assembly Instructions Detailed assembly instructions for the Signature Design by Ashley D629-32 table. Includes a comprehensive parts list, step-by-step guidance, and essential safety warnings for proper furniture assembly.
	Assembly Instructions for Ashley Furniture D383-325 Dining Set Comprehensive assembly instructions for the Ashley Furniture D383-325 dining set, including safety guidelines, a parts list, and step-by-step assembly procedures for the table and chairs.
	Signature Design by Ashley D617-45 Rectangle Dining Table Assembly Instructions Concise and SEO-optimized assembly instructions for the Signature Design by Ashley D617-45 rectangle dining table. Includes safety warnings, parts list, and step-by-step guidance.
	Signature Design by Ashley D743-35 Oval Dining Extension Table Assembly Instructions Step-by-step assembly guide and safety information for the Signature Design by Ashley D743-35 Oval Dining Extension Table. Includes parts list and contact details for assistance.