Important Safety Information
⚠️ General Safety Precautions:
- Read all instructions before assembly.
- Assembly should be performed by two or more people.
- Do not tighten any bolts until all bolts have been started.
- Keep small parts and hardware away from children.
- Do not stand on tables, as they are not designed for this purpose.
- Keep children away from the assembly area.
- The appearance of your unit may differ slightly from the illustrations.
(Note: Warnings are provided in English, Spanish, French, and Chinese in the original document.)
Parts List
- A: Tabletop/Leaf (x1)
- B: Table Legs (x4)
- C: Bolts (5/16" x 60mm) (x8)
- D: Allen Wrench (M4) (x1)
Assembly Instructions
Step 1: Attach Legs to Tabletop
Place the tabletop (A) upside down on a clean, protected surface. Attach each of the four legs (B) to the underside of the tabletop using the provided bolts (C). Insert and partially tighten all eight bolts using the Allen wrench (D). Ensure all bolts are started before fully tightening them.
Diagram Description: The diagram shows the underside of the tabletop with four legs being attached. A close-up view illustrates how the bolts (C) and washers are used to secure the legs (B) to the tabletop, with the Allen wrench (D) shown for tightening.
After all legs are attached and bolts are started, proceed to fully tighten all bolts.
Diagram Description: The second diagram shows the assembled table standing upright. A curved arrow indicates the table's placement or use.
Support and Replacement Parts
For replacement parts or further assistance, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
