CYCPLUS GPS ВЕЛОКОМПЬЮТЕР M2

User Manual

This document provides instructions for the CYCPLUS GPS Bike Computer M2.

1. Package Contents

• GPS Bike Computer
• Mount for bike computer
• Rubber gasket
• Instruction manual
• 3x Rubber mounting rings
• Type-C charging cable

2. Mounting Methods

1. CYCPLUS Z1/Z2 mount for bike computer (purchased separately).
2. Secure the bike computer crosswise using the rubber mounting rings from the kit.

3. Functions

1. Supports 10 data types: speed, time, distance, altitude (barometric), climb, incline, total distance, heart rate, cadence, power.
2. Lap counting (requires manual operation).
3. GPS track recording (saved manually).
4. Synchronizes with 3 applications: Xoss, Strava, Trainingpeaks.
5. Automatic power on/off.

4. Quick Start

1. Press [L1 button ►II] to start/open.
2. Press and hold [R1 button C] to set the time zone.
3. Press [L1 button ►II] to start data recording.
4. Press [R1 button C] to change displayed data.
5. Press and hold [L2 button ⚙️] to save recording data.
6. Press [R2 button ☀️] to turn backlight on/off.
7. Download the XOSS application.
8. Connect to the application and synchronize data.

5. Data Indicators

NOW Screen:

• GPS Recording: Indicates GPS signal status.
• Battery: Shows battery level.
• Temperature: Displays current temperature (e.g., 28°C).
• LAP: Current lap information.
• Speed Unit: Displays the unit for speed (e.g., KMH).
• Current Speed: Shows the current speed.
• Distance: Displays the distance covered in the current ride.
• Current Speed: Shows the current speed.
• Connected to Speed Sensor: Icon indicating connection to a speed sensor.
• Time: Displays current time or ride time.
• Current Cadence: Shows current pedaling cadence.
• Current Time: Displays the current time.
• Current Heart Rate: Shows current heart rate.
• Current Altitude: Displays current altitude.
• Current Climb: Shows the elevation gained.
• Current Incline: Displays the current slope.

MAX Screen:

• Connected to Phone: Indicates phone connection status.
• Recording Stopped: Indicates recording status.
• Max Speed: Displays the maximum speed achieved.
• Max Altitude: Displays the maximum altitude reached.
• Max Heart Rate: Shows the maximum heart rate recorded.
• Max Cadence: Displays the maximum cadence achieved.
• Max Incline: Shows the maximum incline encountered.
• Max Power: Displays the maximum power output.
• Temperature Unit: Displays the unit for temperature (e.g., °F).

AVG Screen:

• Average Speed: Displays the average speed.
• Average Altitude: Shows the average altitude.
• Average Heart Rate: Displays the average heart rate.
• Average Cadence: Shows the average cadence.
• Average Incline: Displays the average incline.
• Average Power: Shows the average power output.

6. Buttons

7. Settings

There are 6 pages in the settings. Hold the right button to enter settings, and press the right button to switch pages.

01. ANT+ Sensor Search (C2)

1. Press and hold [R1 button C] to enter settings. The screen will display C2, and the ANT+ indicator will flash.
2. Press [L1 button ►II] to start searching for ANT sensors. After the search, the screen will return to the main interface and display sensor data. The search time is 10 seconds. Exiting sensor settings (C2) and returning to the main interface occurs after the timeout. Supported ANT sensors: speed sensor, cadence sensor, heart rate monitor, power meter.

02. Wheel Circumference Setting (C3)

1. Press and hold [R1 button C] to enter settings, then press [R1 button C]. The screen will display C3, and the following 4 digits will flash.
2. Press [L1 button ►II] to enter settings. The first digit will flash, indicating it can be set.
3. Press [R1 button C] to change the digit.
4. Press [L2 button ⚙️] to switch the selected digit.
5. Press and hold [R1 button C] to exit. Wheel circumference must be set only when an ANT+ speed sensor is connected. The unit of measurement is mm.

03. Time Zone Setting (C4)

1. Press and hold [R1 button C] to enter settings, then press the R1 button twice. The screen will display C4 and flash 08 (default time zone).
2. Press [L1 button ►II] to start setting. '08' will stop flashing.
3. Press [R1 button C] to change the digit.
4. Press [L2 button ⚙️] to switch the selected digit.
5. Press and hold [R1 button C] to exit.

04. Speed Unit Setting (C5)

1. Press and hold [R1 button C] to enter settings, then press [R1 button C] three times. The screen will display C5 and flash KMH.
2. Press [L1 button ►II] to start setting. The first digit will flash, indicating it can be set.
3. Press [R1 button C] to switch between KMH and MPH.
4. Press and hold [R1 button C] to exit.

05. Temperature Unit Setting (C6)

1. Press and hold [R1 button C] to enter settings, then press [R1 button C] four times. The screen will display C6 and flash '°C'.
2. Press [L1 button ►II] to start setting. '°C' will stop flashing.
3. Press [R1 button C] to switch between Celsius and Fahrenheit.
4. Press and hold [R1 button C] to exit.

06. Factory Reset (C7)

1. Press and hold [R1 button C] to enter settings, then press [R1 button C] five times. The screen will display C7 and flash RECOVER.
2. Press [L1 button ►II] to start setting. 'RECOVER' will stop flashing.
3. Press and hold [L2 button ⚙️] to restore factory settings, after which the computer will turn off.

8. Application

01. Download XOSS and Register

Scan the QR code or download the application from Google Play or the App Store. Register via email. Then turn on Bluetooth on your phone.

[QR Code Image] [Google Play Icon] [App Store Icon] [XOSS App Icon]

02. Connecting M2 Computer

1. Open the "XOSS" app.
2. Select CYCPLUS M2.
3. Press Connect.
4. Select the paired computer from the found devices.
5. Connection successfully established.

03. Connecting STRAVA/Training Peaks

Find Strava / Training Peaks in your personal files and click "Connect". Log in to Strava / Training Peaks using your account and password (logging in with Google and Facebook accounts is not supported).

[Screenshot of XOSS app showing services]

[Screenshot of Strava login page]

[Screenshot of Strava connection prompt]

04. Data Update and Analysis Check

1. Press Sync; the recording will be synchronized with the application. If Strava is connected, data will be automatically synchronized with Strava.
2. Select an activity on the exercise page to view cycling data.

[Screenshots showing data synchronization and activity details]

9. Notes

1. Battery Charging: When charging via Type-C, the battery indicator on the screen will light up and flash, then stop flashing, indicating that the battery is fully charged.
2. GPS Positioning: After pressing [L1 button ►II] to turn on the computer, GPS positioning will start automatically and take about 35 seconds (longer the first time).
3. Data Recording: After powering on, press [L1 button ►II] to start recording data. Press and hold [L2 button ⚙️] to save the recording after the ride.
4. Memory: When memory is full, the computer will overwrite previous recordings in chronological order.

10. Specifications

11. Manufacturer

Manufacturer: Chengdu Chendian Intelligent Technology Co., Ltd

Warranty: 12 months.

For warranty claims: support@medgadgets.ru

Distributor: OOO MGADZHET, 140002, Lyubertsy, Oktyabrsky prospect d.20 korpus 2

For suggestions: info@medgadgets.ru

[CE Logo] [Recycling Symbol] [Battery Disposal Symbol]

MADE IN CHINA