Cycplus M1 GPS Bike Computer

User Manual

GPS Location - Quick Start Guide

To receive satellite signals, please remain static and make sure your device is used in an open space and barrier-free area.

Press the left button [►II] to turn on.
Get GPS signal after startup takes a few minutes. A GPS icon appears to indicate the device is ready.
Press the left button [►II] again to start recording. A recording icon appears when recording starts.
Long press the mid button [M] to save the recording data. The recording icon disappears when the data has been saved.
Long press the left button [►II] to turn off.

Introduction

NAME: Smart GPS bike computer

MODEL: M1

SCREEN SIZE: 2.9 inch LCD

PRODUCT SIZE: 90*53*20 mm

PRODUCT WEIGHT: 77.5 g

BATTERY: 1200 mAh 3.7 V

MEMORY CAPACITY: 150 hours

ENDURANCE TIME: 30-35 hours

CHARGING MODE: Type-C

CHARGING TIME: Nearly 3.5 hours

APP CONNECTION: Bluetooth 5.0

PERIPHERAL CONNECTION: ANT+

SUPPORTED PERIPHERALS: Speed sensor, Cadence sensor, Heart rate monitor, Powermeter.

WATERPROOF: IPX6 (Rain-proof, not soakable)

Device Controls:

Right button [R]: Go to next page
Long press right button [R]: Enter/Quit Settings
Mid button [M]: Count Lap
Long press mid button [M]: Save Record
Left button [►II]: Power On / Start/Pause Recording
Long press left button [►II]: Power Off

Current Data (NOW)

Displays real-time cycling data including:

Clock: Current time
Temperature: Ambient temperature
Speed: Current speed
Heart rate: Current heart rate
Cadence: Current cadence
Power: Current power output
Odometer (ODO): Total distance traveled
Gradient: Current incline/decline
Lap: Current lap information
Battery level: Device battery status
Altitude: Current altitude
Ascent: Total ascent

Average Data (AVG)

Displays average data over the current recording session for:

Speed
Heart rate
Cadence
Power
Gradient

Max Data (MAX)

Displays maximum data recorded during the current session for:

Speed
Heart rate
Cadence
Power
Gradient

About Settings

Long press the right button [R] to enter the settings menu. Press the right button [R] to switch between 8 setting pages. Long press the right button [R] to return to the home page after finishing settings.

ANT+ Sensors Connection

To connect sensors:

Press the left button [►II] to start searching for the ANT+ sensor.
When the sensor is connected, data will appear on the screen. If the sensor is unlinked, its digits will flash.
The device will return to the home page after 10 seconds.

To unpair sensors: Switch to page C9, then press the left button [►II] to unpair all paired sensors.

Wheel Circumference Setting

Follow the on-screen prompts to set the wheel circumference:

Press the left button [►II] to start setting.
Press the right button [R] to modify the digit.
Press the mid button [M] to switch the setable digit.
Press the left button [►II] to finish setting.

Time Zone Setting

Follow the on-screen prompts to set the time zone:

Press the left button [►II] to start setting.
Press the right button [R] to modify the time zone.
Press the left button [►II] to finish setting. The time zone digits will flash during this process.

Speed Unit Setting

Follow the on-screen prompts to set the speed unit:

Press the left button [►II] to start setting.
Press the right button [R] to switch between KMH and MPH. The unit will flash during this process.
Press the left button [►II] to finish setting.

Temperature Unit Setting

Follow the on-screen prompts to set the temperature unit:

Press the left button [►II] to start setting.
Press the right button [R] to switch between °C and °F. The temperature unit icon will flash during this process.
Press the left button [►II] to finish setting.

Factory Reset

Follow the on-screen prompts to perform a factory reset:

Press the left button [►II] to start setting.
Long press the mid button [M] to restore factory settings. The computer will then turn off.

Odograph Setting

Follow the on-screen prompts to set the odograph values:

Press the left button [►II] to start setting.
Press the right button [R] to modify the digit.
Press the mid button [M] to switch the setable digit.
Press the left button [►II] to finish setting.

XOSS APP Connection

Scan the QR code or download the XOSS APP from the Google Play or App Store. Register by email, then open your phone's Bluetooth.

Connecting M1 Computer: Open XOSS, choose Cycplus M1, click connect, and select the paired computer from the found devices.

Connecting STRAVA/Training Peaks

Find Strava / Training Peaks in your personal files and click connect. Log in to Strava / Training Peaks using your account and password. (Google and Facebook account login are not supported).

Updating Data and Checking the Analysis

Click 'Sync' to sync the record to the APP. If Strava is connected, the data will be automatically synced to Strava. Choose the activity on the exercise page to view your cycling data.

Notes

Data recording: Long press the left button [►II] to turn on the device. Press the left button [►II] to start recording data. Remember to long press the middle button [M] to save the record after riding.
Memory: Once the memory is full, the computer will overwrite previous records in chronological order.
Backlight: After setting the time zone, the backlight will automatically turn on every night from 18:00 to 9:00. The screen will light up with a press of any button and turn off after 10 seconds.

Package List

GPS bike computer
Bike computer mount
Rubber pad
Instruction manual
Rubber band x 3
Type-C charging cable

About Installation

CYCPLUS Z1/Z2 bike computer mount (Need to buy separately).
Use the bike computer mount. Cross-fix the mount with rubber bands.

Factory Info

Chengdu Chendian Intelligent Technology Co., Ltd.

Warranty

Free replacement or repair in 1 year.

After-sales E-mail

steven@cycplus.com

Tire Circumference Chart

Please use this chart for your reference. Tire size is shown on the side of a tire. Tire circumference may vary depending on tire pressure.

ETRTO	Size	L(mm)	Inch	ETRTO	Size	L(mm)	Inch
47-203	12x1.75	935		28-590	26x1-1/8	1970
54-203	12x1.95	940	12	37-590	26x1-3/8	2068
40-254	14x1.50	1020	14	37-584	26x1-1/2	2100	26
47-254	14x1.75	1055		650C Tubular	26x7/8	1920
40-305	16x1.50	1185	20	20-571	650x20C	1938
47-305	16x1.75	1195	16	23-571	650x23C	1944
54-305	16x2.00	1245		25-571	650x25C 26x1(571)	1952
28-349	16x1-1/8	1290		40-590	650x38A	2125
37-349	16x1-3/8	1300		40-584	650x38B	2105
32-369	17x1-1/4(369)	1340		25-630	27x1(630)	2145
40-355	18x1.50	1340		28-630	27x1-1/8	2155	27
47-355	18x1.75	1350	18	32-630	27x1-1/4	2161
32-406	20x1.25	1450		37-630	27x1-3/8	2169
35-406	20x1.35	1460		40-584	27.5x1.50	2079
40-406	20x1.50	1490		50-584	27.5x1.95	2090
47-406	20x1.75	1515		54-584	27.5x2.1	2148	27.5
50-406	20x1.95	1565		57-584	27.5x2.25	2182
28-451	20x1-1/8	1545		18-622	700x18C	2070
37-451	20x1-3/8	1615	20	19-622	700x19C	2080
37-501	22x1-3/8	1770	22	20-622	700x20C	2086
40-501	22x1-1/2	1785		23-622	700x23C	2096
47-507	24x1.75	1890	24	25-622	700x25C	2105
50-507	24x2.00	1925		28-622	700x28C	2136
54-507	24x2.125	1965		30-622	700x30C	2146
25-520	24x1(520)	1753		32-622	700x32C	2155
	24x3/4 Tubular	1785		700C Tubular	2130	700C
28-540	24x1-1/8	1795		35-622	700x35C	2168
32-540	24x1-1/4	1905		38-622	700x38C	2180
25-559	26x1(559)	1913		40-622	700x40C	2200
32-559	26x1.25	1950		42-622	700x42C	2224
37-559	26x1.40	2005		44-622	700x44C	2235
40-559	26x1.50	2010		45-622	700x45C	2242
47-559	26x1.75	2023		47-622	700x47C	2268
50-559	26x1.95	2050		54-622	29x2.1	2288	29
54-559	26x2.10	2068		56-622	29x2.2	2298
57-559	26x2.125	2070		60-622	29x2.3	2326
58-559	26x2.35	2083
75-559	26x3.00	2170

Certifications: CE, UKCA, FCC

Country of Origin: Made in China

	CYCPLUS M1 GPS Bike Computer User Manual User manual for the CYCPLUS M1 GPS bike computer, detailing features, setup, connectivity with XOSS app, Strava, and TrainingPeaks, and technical specifications.
	Cycplus M1 GPS Bike Computer User Manual and Setup Guide Explore the Cycplus M1 GPS Bike Computer user manual. Learn about its features, installation, quick start, button functions, settings, app connectivity with XOSS, Strava, and TrainingPeaks, and detailed specifications for optimal cycling performance.
	CYCPLUS M1 GPS Bike Computer User Manual User manual for the CYCPLUS M1 GPS Bike Computer, detailing its features, setup, operation, and connectivity with apps like XOSS and Strava.
	CYCPLUS GPS Bike Computer M2 User Manual User manual for the CYCPLUS GPS Bike Computer M2, detailing its features, setup, functions, and specifications. Learn how to connect sensors, sync data with apps like XOSS, Strava, and TrainingPeaks, and understand the device's display and button operations.
	CYCPLUS GPS Bike Computer M2 User Manual Comprehensive user manual for the CYCPLUS GPS Bike Computer M2, detailing its features, installation, operation, app connectivity, and specifications.
	Cycplus M1 Smart GPS Bike Computer Quick Start Guide A comprehensive guide to setting up and using the Cycplus M1 Smart GPS Bike Computer, covering basic operations, settings, and connectivity.
	Cycplus M1 Cycling Computer User Manual Comprehensive user manual for the Cycplus M1 cycling computer, covering setup, features, connectivity, and maintenance. Learn how to use your device for tracking rides, connecting to apps like Strava, and understanding its specifications.
	CYCPLUS M1 Smart GPS Bike Computer Quick Start Guide A quick start guide for the CYCPLUS M1 Smart GPS Bike Computer, covering setup, basic operations, data display, and connectivity options.