Manuals+

CYCPLUS M2 GPS Bike Computer User Manual

This document provides instructions for setting up and using the CYCPLUS M2 GPS Bike Computer.

GPS Positioning - Quick Start Guide

To receive satellite signals, remain stationary and ensure the device is used in an open area without obstructions.

  1. Press and hold the L1 button [L1] to power on.
  2. It takes a few minutes to acquire a GPS signal after the device is powered on.
  3. The GPS icon ?️ will be displayed to indicate the device is ready.
  4. Press the L1 button [L1] again to start recording.
  5. The record icon ▶️ will be displayed when recording starts.
  6. Press and hold the L2 button [L2] to save the recording data.
  7. The save icon ✔️ will disappear when the recording data has been saved.
  8. Press and hold the L1 button [L1] to power off.

Introduction

Name: GPS Bike Computer

Model: M2

Screen Size: 2.5 inch LCD

Product Size: 70*70*21.5 mm

Product Weight: 69 g

Battery: 1000 mAh 3.7 V

Memory Capacity: 150 hours

Usage Time: 70 hours

Charging Mode: Type-C

Charging Time: Approx. 2.5 hours

App Connection: Bluetooth 5.0

Peripheral Connection: ANT+

Supported Sensors: Speed Sensor, Cadence Sensor, Heart Rate Monitor, Power Meter.

Waterproof: IPX6 (Rainproof, not submersible in water)

Key Operations:

Understanding the Display

The device display shows various metrics including speed, temperature, GPS status, battery level, lap count, time, distance, heart rate, cadence, and power (watt).

Settings

Long press the R1 button [R1] to enter the settings menu.

Press the R1 button [R1] to cycle through the 8 available settings.

Long press the R1 button [R1] to return to the home screen after completing settings adjustments.

ANT+ Sensor Connection

Press the L1 button [L1] to start searching for ANT+ sensors.

Data will be displayed once the sensor is connected.

The device will return to the home screen after 10 seconds.

Unpairing Sensors: Navigate to the C9 screen and press the left button to unpair all paired sensors.

Wheel Circumference Setting

Press the L1 button [L1] to start the ANT+ sensor search (this step is used to initiate the setting mode).

The number to be adjusted will blink. Press the R1 button [R1] to change the number.

Press the L2 button [L2] to switch to the next digit to be adjusted.

All numbers will blink when ready to confirm. Press the L1 button [L1] to exit the setting.

Time Zone Setting

Press the L1 button [L1] to start the time zone setting.

Press the R1 button [R1] to change the time zone.

Press the L1 button [L1] to exit the setting. The time zone number will blink upon exit.

Speed Unit Setting

Press the L1 button [L1] to start the setting.

Press the R1 button [R1] to switch between KMH and MPH.

Press the L1 button [L1] to exit the setting. The unit will blink.

Temperature Unit Setting

Press the L1 button [L1] to start the setting.

Press the R1 button [R1] to switch between °C and °F.

The icon will blink. Press the L1 button [L1] to exit the setting.

Factory Reset

Press the L1 button [L1] to start the setting.

Press and hold the L2 button [L2] to restore factory settings. The computer will then power off.

Odometer Setting

All numbers will blink. Press the L1 button [L1] to start the setting.

Press the R1 button [R1] to change the number.

Press the L2 button [L2] to switch to the next adjustable digit.

The adjustable number will blink. Press the L1 button [L1] to exit the setting.

APP Connection

Scan the QR code or search for "CYCPLUS Fit" on Google Play and the App Store to download the app and view more data. You can also use the XOSS app to view data.

Notes

Package Contents

Installation

  1. Use the CYCPLUS Z1/Z2 bike computer mount (sold separately).
  2. Attach the bike computer mount. Cross the rubber bands for secure mounting.

Factory Information

Manufacturer: Chengdu Chendian Intelligent Technology Co., Ltd.

Address: No. 88 Tianchen Road, Chengdu, Sichuan Province, China

Warranty: 2-year warranty

Tire Circumference Table

Please use this table as a reference. Tire size is indicated on the side of the tire. Tire circumference may vary depending on tire pressure.

ETRTOSizeCircumference (mm)Rim Diameter (inches)
47-20312x1.75935
54-20312x1.9594012
40-25414x1.50102014
47-25414x1.751055
40-30516x1.501185
47-30516x1.75119516
54-30516x2.001245
28-34916x1-1/81290
37-34916x1-3/81300
32-36917x1-1/4(369)1340
40-35518x1.501340
47-35518x1.75135018
32-40620x1.251450
35-40620x1.351460
40-40620x1.501490
47-40620x1.751515
50-40620x1.951565
28-45120x1-1/81545
37-45120x1-3/8161520
37-50122x1-3/8177022
40-50122x1-1/21785
47-50724x1.75189024
50-50724x2.001925
54-50724x2.1251965
25-52024x1(520)1753
24x3/4 Tubular1785
28-54024x1-1/81795
32-54024x1-1/41905
25-55926x1(559)1913
32-55926x1.251950
37-55926x1.402005
40-55926x1.502010
47-55926x1.752023
50-55926x1.952050
54-55926x2.102068
57-55926x2.1252070
58-55926x2.352083
75-55926x3.002170
28-59026x1-1/81970
37-59026x1-3/82068
37-58426x1-1/2210026
650C Tubular 26x7/81920
20-571650x20C1938
23-571650x23C1944
25-571650x25C 26x1(571)1952
40-590650x38A2125
40-584650x38B2105
25-63027x1(630)2145
28-63027x1-1/8215527
32-63027x1-1/42161
37-63027x1-3/82169
40-58427.5x1.502079
50-58427.5x1.952090
54-58427.5x2.1214827.5
57-58427.5x2.252182
18-622700x18C2070
19-622700x19C2080
20-622700x20C2086
23-622700x23C2096
25-622700x25C2105
28-622700x28C2136
30-622700x30C2146
32-622700x32C2155
700C Tubular2130700C
35-622700x35C2168
38-622700x38C2180
40-622700x40C2200
42-622700x42C2224
44-622700x44C2235
45-622700x45C2242
47-622700x47C2268
54-62229x2.1228829
56-62229x2.22298
60-62229x2.32326

Compliance and Certifications

The device complies with relevant standards, indicated by markings such as CE, UKCA, and FCC.

Recycling information is provided, indicating proper disposal methods for electronic waste.

PDF preview unavailable. Download the PDF instead.

Dansk manual - M2 Canva Canva

Related Documents

PreviewCycplus M2 GPS Bike Computer Quick Start Guide
A comprehensive guide to setting up and using the Cycplus M2 GPS Bike Computer, including features, settings, and connectivity options.
PreviewCYCPLUS GPS Bike Computer M3 User Manual
User manual for the CYCPLUS M3 GPS Bike Computer, detailing its features, specifications, button functions, data display, settings, and installation.
PreviewCycplus M1 GPS Bike Computer User Manual and Setup Guide
Explore the Cycplus M1 GPS Bike Computer user manual. Learn about its features, installation, quick start, button functions, settings, app connectivity with XOSS, Strava, and TrainingPeaks, and detailed specifications for optimal cycling performance.
PreviewCYCPLUS GPS Bike Computer M2 User Manual
User manual for the CYCPLUS GPS Bike Computer M2, detailing its features, setup, operation, and maintenance.
PreviewCYCPLUS GPS Bike Computer M2 User Manual
User manual for the CYCPLUS GPS Bike Computer M2, detailing its features, setup, functions, and specifications. Learn how to connect sensors, sync data with apps like XOSS, Strava, and TrainingPeaks, and understand the device's display and button operations.
PreviewCYCPLUS M3 GPS Bike Computer User Manual
Comprehensive user manual for the CYCPLUS M3 GPS Bike Computer, covering quick start guide, button functions, data display, settings, app connection, installation, specifications, and manufacturer information. Includes a tire circumference chart and FCC warning.
PreviewCYCPLUS GPS Bike Computer User Manual
User manual for the CYCPLUS GPS Bike Computer, detailing its features, setup, operation, and specifications. Includes information on ANT+ sensor connection, speed and temperature units, and app synchronization.
PreviewCYCPLUS GPS Bike Computers and Accessories Product List
Explore the CYCPLUS range of GPS bike computers, including models M1, G1, and M2, along with essential cycling accessories like heart rate monitors (H1, H2), speed and cadence sensors (C3), ANT+ USB receivers (U1), bike trainers (T1), crank power meters (P1), and smart electric inflators (A2, A6).