CYCPLUS GPS Bike Computer M2
Introduction
The CYCPLUS GPS Bike Computer M2 is a smart cycling computer designed to provide cyclists with essential data and tracking capabilities during their rides. It offers GPS positioning, real-time data display, and connectivity with various sensors.
Quick Start Guide
- Power On: Press the L1 button [►II] briefly.
- GPS Signal: Wait a few minutes for the device to acquire a GPS signal. A GPS icon indicates readiness.
- Start Recording: Press the L1 button [►II] again. A recording icon will appear.
- Save Recording: Long press the L2 button [◎] to save the current recording data. The save icon will disappear upon successful saving.
- Power Off: Long press the L1 button [►II].
Product Specifications
- Name: Smart GPS Bike Computer
- Model: M2
- Screen Size: 2.5 inch LCD
- Product Size: 69*69*22 mm
- Product Weight: 68 g
- Battery: 1100 mAh 3.7 V
- Memory Capacity: 150 hours
- Endurance Time: 30-35 hours
- Charging Mode: Type-C
- Charging Time: Approximately 3.5 hours
- App Connection: Bluetooth 5.0
- Peripheral Connection: ANT+
- Supported Peripherals: Speed sensor, Cadence sensor, Heart rate monitor, Powermeter
- Waterproof: IPX6 (Rain-proof, not submersible)
Key Features and Operation
- Buttons: L1 (Power/Start/Pause), L2 (Lap/Save), R1 (Next Page/Enter Settings), R2 (Backlight).
- Display Information: Shows speed, distance, time, heart rate, cadence, power, temperature, altitude, gradient, and more.
- Data Recording: Records ride data including speed, distance, time, heart rate, cadence, and power.
- ANT+ Sensor Connection: Allows connection to external sensors for enhanced data tracking.
- Wheel Circumference Setting: Ensures accurate distance measurement by setting the correct wheel circumference.
- Time Zone Setting: Allows users to set the correct time zone for accurate timekeeping.
- Speed Unit Setting: Switch between KMH and MPH.
- Temperature Unit Setting: Switch between °C and °F.
- Factory Reset: Option to restore the device to its original factory settings.
- Odograph Setting: Configuration for the odometer.
XOSS App Connection
Scan the QR code or download the XOSS app from Google Play or the App Store. Register via email and enable Bluetooth on your phone to connect the M2 computer.
Connecting to STRAVA/Training Peaks
Users can connect their CYCPLUS M2 to STRAVA or Training Peaks through the XOSS app. Log in with your existing account to sync ride data automatically.
Data Upload and Analysis
After syncing data to the XOSS app, users can view detailed analysis of their cycling activities. If connected to STRAVA, data syncs automatically.
Notes
- Data Recording: Remember to long press L2 to save the record after your ride.
- Memory Management: When the memory is full, the device will overwrite older records chronologically.
Package Contents
- GPS Bike Computer
- Bike Computer Mount
- Rubber Pad
- Instruction Manual
- Rubber Bands x 3
- Type-C Charging Cable
Installation
- Use the CYCPLUS Z1/Z2 bike computer mount (sold separately).
- Attach the mount to the handlebar and secure it with the rubber bands, ensuring they cross diagonally.
- Align the device with the mount's tabs and rotate clockwise until it locks with an audible click.
Manufacturer Information
Manufacturer: Chengdu Chendian Intelligent Technology Co., Ltd.
Warranty
Enjoy free replacement or repair within 1 year of purchase.
Contact Information
For after-sales support, please email: steven@cycplus.com
