Cycplus M2 GPS Bike Computer - Quick Start Guide

GPS Location - Quick Start Guide

To receive satellite signals, please remain static and make sure your device is used in an open space and barrier-free area.

1. Press L1 button [▶] to turn on.
2. Get GPS signal after start up takes a few minutes. [GPS signal icon] appears to indicate the device is ready.
3. Press L1 button [▶] again to start recording. [Recording icon] appears when recording starts.
4. Long press L2 button [●] to save the recording data. [Saving icon] disappears when the recording data has been saved.
5. Long press L1 button [▶] to turn off.

Introduction

NAME: Smart GPS bike computer
MODEL: M2
SCREEN SIZE: 2.5 inch LCD
PRODUCT SIZE: 69*69*22 mm
PRODUCT WEIGHT: 68 g
BATTERY: 1100 mAh 3.7 V
MEMORY CAPACITY: 150 hours
ENDURANCE TIME: 30-35 hours
CHARGING MODE: Type-C
CHARGING TIME: Nearly 3.5 hours
APP CONNECTION: Bluetooth 5.0
PERIPHERAL CONNECTION: ANT+
SUPPORTED PERIPHERALS: Speed sensor, Cadence sensor, Heart rate monitor, Powermeter.
WATERPROOF: IPX6 (Rain-proof, not soakable)

Button Functions:

• L1: Power On / Start/Pause Recording
• L2: Count Lap / Save Record
• R1: Go to next page / Enter/Quit Settings
• R2: Turn on/off Backlight

Diagram Description: The diagram shows the Cycplus M2 bike computer with various data displays including speed, temperature, battery level, lap count, time, distance, heart rate, cadence, power, and altitude. It also indicates the functions of the L1, L2, R1, and R2 buttons.

Current Data

The device displays current data such as speed, temperature, battery level, time, distance, heart rate, cadence, power, trip distance, gradient, and altitude. Different screens can be accessed by pressing the R1 button.

Diagram Description: This section shows different display screens for current data, including 'Recording Temperature', 'Pause recording', 'No GPS', and 'Battery level'. It details the data shown for Speed, Speed Sensor, Trip time, Heart rate, Cadence, Power, Trip dist, Odograph, Clock, Gradient, and Altitude.

AVG Average Data & MAX Max Data

The device can display average and maximum data for various metrics including speed, altitude, gradient, heart rate, cadence, and power.

Diagram Description: Two diagrams illustrate the 'AVG Average Data' and 'MAX Max Data' screens. The 'AVG' screen shows average speed, altitude, gradient, heart rate, cadence, and power. The 'MAX' screen shows maximum speed, altitude, gradient, heart rate, cadence, and power, along with a 'Connected to phone' indicator and 'Temperature unit'.

About Settings

Long press R1 button [▶] to enter settings. Press R1 button [▶] to switch between 8 setting pages. Long press R1 button [▶] to return to the home page after finishing settings.

Diagram Description: A series of circular icons labeled C2 through C8 represent different setting pages. The diagram shows the process of navigating through these settings.

Ant+ Sensors Connection

Press L1 button [▶] to start searching for ANT sensors. Data will appear when the sensor has been connected. The device will return to the home page after 10 seconds.

Diagram Description: The diagram shows the Cycplus M2 device displaying '31.4 KMH' and '1350' when a sensor is connected, and '0.0 KMH' and '102' for an unlinked sensor with flashing digits.

Wheel Circumference Setting

Press L1 button [▶] to start setting. Press R1 button [▶] to modify the digit. Press L2 button [●] to switch the settable digit. Press L1 button [▶] to finish setting.

Diagram Description: The diagram illustrates the wheel circumference setting process, showing the device displaying '03', '2096', and 'the setable digit flashing'.

Time Zone Setting

Press L1 button [▶] to start setting. Press R1 button [▶] to modify the time zone. Press L1 button [▶] to finish setting.

Diagram Description: The diagram shows the time zone setting process, with the device displaying '09:00' and '10:00', and 'time zone digits flashing'.

Speed Unit Setting

Press L1 button [▶] to start setting. Press R1 button [▶] to switch between KMH and MPH. Press L1 button [▶] to finish setting.

Diagram Description: The diagram shows the speed unit setting, with the device displaying 'KMH' and 'MPH' and the unit flashing.

Temperature Unit Setting

Press L1 button [▶] to start setting. Press R1 button [▶] to switch between °C and °F. Press L1 button [▶] to finish setting.

Diagram Description: The diagram shows the temperature unit setting, with the device displaying the temperature unit flashing and the icon flashing.

Factory Reset

Press L1 button [▶] to start setting. Long press L2 button [●] to restore factory settings, and the computer will turn off.

Diagram Description: The diagram shows the factory reset process, with the device displaying 'RE COU ER' and '7'.

Odograph Setting

Press L1 button [▶] to start setting. Press R1 button [▶] to modify the digit. Press L2 button [●] to switch the settable digit. Press L1 button [▶] to finish setting.

Diagram Description: The diagram illustrates the odograph setting process, showing the device displaying 'all digit flashing' and 'the setable digit flashing'.

XOSS APP Connection

Scan QR code or download the APP from Google Play or App Store, register by email. Then open the phone Bluetooth.

Diagram Description: A QR code is displayed for downloading the XOSS app. The diagram also shows the process of connecting the M1 computer via the XOSS app.

Connecting M1 Computer

Open "XOSS", choose CYCPLUS M2. Then click connect, choose the paired computer among the found devices.

Diagram Description: The diagram shows screenshots of the XOSS app interface, illustrating how to select the Cycplus M2 and connect to paired devices.

Connecting STRAVA/Training Peaks

Find Strava / Training Peaks in your personal files and click connect. Log in Strava / Training Peaks with account and passwords (Google and Facebook account login is not supported).

Diagram Description: The diagram shows screenshots of the Strava and Training Peaks interfaces, illustrating the connection process.

Updating Data and Checking the Analysis

Click Sync, the record will be synced to APP. If Strava is connected, the data will be automatically synced to Strava. Choose the activity on the exercise page, you will see the cycling data.

Diagram Description: The diagram shows screenshots of the app interface displaying synced cycling data and analysis.

Notes

• Data recording: Press L1 button [▶] to turn on, press the L1 button [▶] to start recording data. Don't forget to long press the L2 button [●] to save the record after riding.
• Memory: After the memory is used up, the computer will overwrite the previous records according to the chronological order.

Package List

• GPS bike computer
• Bike computer mount
• Rubber pad
• Instruction manual
• Rubber band x 3
• Type-C charging cable

Diagram Description: The diagram shows images of all the items included in the package: the GPS bike computer, bike computer mount, rubber pad, instruction manual, rubber bands, and a Type-C charging cable.

About Installation

1. CYCPLUS Z1/Z2 bike computer mount (Need to buy separately).
2. Use bike computer mount. Cross-fix the mount with rubber bands.

Diagram Description: The diagram illustrates the installation process of the bike computer mount onto a handlebar, showing how to attach the mount and secure it with rubber bands.

Factory Info

Chengdu Chendian Intelligent Technology Co., Ltd.

Warranty

Free replacement or repair in 1 year.

After-sales E-mail

steven@cycplus.com

Tire Circumference Chart

Please use this chart for your reference. Tire size is shown on the side of a tire. Tire circumference may vary depending on tire pressure.

The chart lists various ETRTO sizes, corresponding tire sizes in inches and millimeters, and their calculated circumferences in millimeters. It covers a wide range of tire sizes for different bicycle types.