ZIP IPCAI538 8MP AI Vandal Dome IP Camera - Quick Start Guide
Model: IPCAI538 | Resolution: 8MP | Lens: 2.8-12mm
Introduction
The IPCAI538 Vandal Dome is a robust metal-exterior IP camera suitable for indoor and outdoor use. It features onboard face detection, iSENSE compatibility for Face Recognition with the latest Zip NVR firmware, up to 40m IR range, 8MP resolution, built-in PoE, and H.265/H.264 codec support.
Key Features
- 8MP AI Vandal Dome Camera
- 2.8-12mm Motorised Lens
- Up to 40m IR Range (True Day/Night)
- Face Detection & Recognition
- H.264 / H.265 Video Compression
- Built-in PoE (Power over Ethernet)
- IP66 Rated for External Use
Connectivity and Powering
The camera offers multiple connection options:
- RJ45 Socket: For network connection (weather-proof cap supplied).
- 2.1mm 12V DC Socket: For direct power input. The camera is polarity sensitive; consumption is 400mA.
- Audio In Phono Socket: For audio input.
- Audio Out Phono Socket: For audio output.
- Alarm In / Out: For alarm system integration.
Powering Options:
Option 1: 12V DC Power
Connect a 12V DC power supply to the 2.1mm DC socket. Ensure correct polarity as the camera is sensitive.
Option 2: PoE (Power over Ethernet)
Connect the camera directly to a ZIP PoE NVR's built-in PoE switch using an RJ45 cable (CAT5e/CAT6, up to 100m max). The camera should automatically become visible on the network within approximately one minute.
If using a separate PoE switch or an IPmitter (wireless bridge), manual configuration is required. Refer to the guide at: zipdvr.com/howto/TIP459
Installation Steps
Follow these steps to install the camera:
- Loosen the three Torx screws on the upper housing and lift it off. A Torx key is supplied.
- Screw the camera's base onto the mounting surface using the provided screws and wall plugs.
- Once positioned, replace the upper housing and fasten the three Torx screws.
Default Login Details
The default login credentials for the camera are:
| Default IP | 192.168.10.1 |
|---|---|
| User Name | admin |
| Password | 777777 |
You can use the ZipFinder tool to search for ZIP IP cameras on your network via a Windows PC. Download it from: softcctv.com/store/Item/Zip-Finder-IP-CCTV-Security-Camera-Discovery-Tool
Technical Specifications
| Image Sensor | 1/2.8" Progressive CMOS |
|---|---|
| Resolution | 8MP 2592(H)×1944(V) |
| Lens Type | 2.8-12mm Motorised |
| Shutter | 1/5~1/20000s |
| Day/Night | Mechanical (True Day-Night) |
| Min. Illumination | 0 (With IR On) |
| IR Range | Up to 40m |
| Digital Noise Reduction | 3D DNR |
| Video Compression | H.264 / H.265 |
| Video Bitrate | 8Kbps ~ 16Mbps |
| Stream Options | Mainstream, SubStream & Mobile Stream |
| Smart Feature | Perimeter Intrusion, Line Crossing, Pedestrian and Vehicle Detection, Facial Detection, Facial Recognition |
| System Compatibility | ONVIF (Profile S, Profile G) |
| Connection | RJ45 10M/100M Ethernet PoE |
| SD Card | Micro SD Card Slot (up to 128GB) |
| Alarm | 1 Input / 1 Output |
| Audio (RCA) | 1 Input / 1 Output |
| Input Voltage | PoE or 12V DC 400mA (PSU Required) |
| Consumption | 8W Max |
| Operating Temperature | From -30 to 60 deg°C |
| Backlight Control | BLC / D-WDR |
| Use | IP66 For External Use |
Important Information
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. System Q Ltd cannot be held responsible for any losses arising from errors or omissions in these instructions.
WEEE Disposal: This symbol ♻️ indicates that equipment must not be mixed with general household waste. For treatment, recovery, and recycling, please return to your local designated WEEE collection point as defined by your local council.
Copyright © 2021 System Q Ltd
Full manual available at: systemq.com/PDF/manual/xIPCAI538.pdf
zipdvr.com/howto/TIP459
