5MP ZIP IP Anti-vandal Varifocal Dome
IPCZIP530 - Quick Start Guide
This Anti-Vandal Dome features a tough metal exterior, making it ideal for both outdoor and indoor use. It offers 5MP resolution, built-in PoE, H.265 codec, and a true day/night filter.
The camera is supplied with a fly lead featuring a 2.1mm DC socket and a standard RJ45 Ethernet socket.
Power Options:
- Option 1: 12V DC Power
Connect the camera using the 2.1mm DC socket. The current consumption is 750mA. Note: The camera is polarity sensitive, so connections must be made correctly.
- Option 2: PoE (Power over Ethernet)
Connect the camera using the RJ45 Ethernet socket with a 48V PoE power source. When connecting to a ZIP PoE NVR, plug the camera directly into the NVR's built-in PoE switch. The camera should automatically become visible after approximately 1 minute.
For the full manual, please visit: https://www.systemq.com/PDF/manual/xIPCZIP530.pdf
Network Configuration & Access
If using a separate PoE switch or an IPmitter (wireless bridge), the camera may require manual configuration. For guidance, please refer to: www.zipdvr.com/howto/TIP459-How-To-Add-IP-Cameras.html
To search for ZIP IP cameras on a network using a Windows PC, download and use the ZIP Finder tool: www.softcctv.com/store/Item/Zip-Finder-IP-CCTV-Security-Camera-Discovery-Tool
Default IP Address: 192.168.10.1
Default User Name: admin
Default Password: 777777
Mounting Instructions
- Loosen the three Torx screws in the upper housing and lift off the housing (Torx key supplied).
- Screw the camera's base to the mounting surface using the provided screws and wall plugs.
- Once the camera is positioned, replace the upper housing and fasten the three Torx screws.
Specifications
Camera Model | IPCZIP530 |
Compression | H.265/H.264 |
Resolution | Up To 5 Mega Pixel |
Lens Type | 2.8-12mm Varifocal |
Consumption | 8W (PoE) / 750mA (12V DC) |
Min. Illumination | 0 Lux (IR On) |
Day/Night | Mechanical (True Day-Night) |
Input Voltage | 12V DC / 48V POE |
Power Connection | 2.1mm DC Socket / RJ45 Power over Ethernet |
WDR | Yes |
Dimensions | Ø146mm x 115mm (Without Bracket) |
IR Range | 40m |
IP Rating | IP66 |
Note: All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. System Q Ltd cannot be held responsible for any losses arising from errors or omissions in these instructions, or the performance or non-performance of the equipment.
Environmental Information
This symbol ♻️ indicates that equipment must not be mixed with general household waste. For treatment, recovery, and recycling, please return to your local designated WEE/CG0783SS collection point as defined by your local council.