Safety Warnings
⚠️ Choking Hazard
Small parts. Sharp points. Adult assembly required.
☀️ Burn Hazard
Always check the temperature of the product before letting your children play on it. Remember that the product may cause burns. Always be aware of the sun and weather conditions, and do not assume that the equipment is safe because the air temperature is not very high.
? Drowning Risk
Children, especially children younger than five years, are at high risk of drowning. Keep children in your direct sight, stay close, and actively supervise them when they are in or near this pond and when you are filling and emptying this pond. Drowning occurs silently and quickly and can occur in as little as 2 inches (5 cm) of water. When searching for a missing child, check the pond first, even if child is thought to be in the house. Children can drown in very small amounts of water. Empty pond completely after each use and store the empty pond in such a way that it does not collect water from rain or any other source. Do not leave toys inside pond, since toys and similar items might attract a child to the pond. Position furniture (for example; tables, chairs) away from pond so that children cannot climb on it to gain access to the pond. After using pond, remove water to a level of less than 1/2 inch by tipping product over to empty water.
? Diving Risk
Do not dive into pond. Diving into shallow water can result in a broken neck, paralysis, or death.
⚡ Electrocution
Keep all electrical lines, radios, speakers and other electrical appliances away from the pond. Do not place near or under overhead electrical lines.
⛑️ First Aid
Keep a working phone and a list of emergency numbers near the pond. Become certified in cardiopulmonary resuscitation (CPR). In the event of an emergency, immediate use of CPR can make a life-saving difference.
Installation
- Do not install the pond over concrete, asphalt, or any other hard surfaces.
- Adult supervision required.
- Instruct children not to use product until properly assembled.
- Maximum weight per seat: 50 lbs (22.68 kg). Limit 1 child.
- DO NOT remove any screws once installed. For disassembly, only remove parts not secured by screws.
- DO NOT over-tighten screws or they will not hold parts together appropriately.
- Screws are designed to pierce the plastic and form their own threads.
To Empty Pond:
- Use a bucket to remove enough water from the pond until one side of pond can be safely lifted to empty remaining water.
- Flip pond completely over to remove the remaining water.
- Completely dry pond and store in a dry, protected area when not in use.
Assembly Steps
Step 1
Combine parts B and C.
Step 2
Attach part B to part C using two 1-7/8" screws (x2).
Step 3
Attach part B to part C using two 1-7/8" screws (x2).
Step 4
Attach part L to part N.
Step 5
Attach part D to part A using three 3/4" screws (x3). Ensure the logo side of part D is visible for proper function.
Step 6
Attach part D to part A.
Step 7
Attach part D to part A using two 1-7/8" screws (x2).
Step 8
Attach part F1 to part E.
Step 9
Insert the assembled E/F1 unit into the main structure.
Step 10
Place parts G and H around the pump mechanism.
Step 11
Secure parts G and H using four 3/4" screws (x4).
Step 12
Insert part K into part D.
Step 13
Insert part K into part D and secure with two 3/4" screws (x2).
Step 14
Attach part M to parts D and K.
Step 15
Connect assembled parts as shown.
Step 16
Attach part D to part A using one 1-7/8" screw (x1).
Step 17
Attach part D to part A using one 1-7/8" screw (x1).
Step 18
Attach part D to part B using one 1-7/8" screw (x1).
Step 19
Attach part D to part C using one 1-7/8" screw (x1).
Step 20
Insert parts P and R into part D.
Cleaning Instructions
General Cleaning
- Use a 50/50 mixture of white vinegar and water.
- Water should be changed frequently. Sanitize occasionally to remove organic debris and prevent bacterial growth.
- Parents should thoroughly wash accessories with mild soapy water before use.
Disposal Instructions
- Please recycle when possible. Disposal must be in compliance with government regulations.
Final Inspection & Maintenance
- Inspect this product before each use.
- Tightly secure connections and replace damaged or worn components.
- Contact The Step2 Company for replacement parts.
Water Watcher Tag Information
Assign an adult to be responsible for watching children in the pool. Give this person a “water watcher" tag and ask that they wear it the entire time they are in charge of supervising children in the pool. If they need to leave for any reason, ask this person to pass the "water watcher" tag and the supervision responsibility to another adult.
Locate Water Watcher tag sheet. Cut out tag, punch holes, and use string to wear tag around neck.
[Note: The example tag shown is for reference only and should not be used as a tag.]
For more information or replacement parts, visit: www.step2.com/survey/?partnumber=412999
