FUFU&GAGA Dresser Assembly Instructions

Product Overview

This document provides detailed instructions for assembling the FUFU&GAGA Dresser. Please read all instructions carefully before beginning assembly.

Assembly requires 2 adults.

[Illustration of a dresser]

Important Information

• Read the entire manual before assembly and use.
• Assemble on a soft surface like a rug to prevent scratches.
• Having a partner can speed up assembly.

Anti-Tipple Warning

Overturned furniture can cause serious or fatal crush injuries. Always use the wall attachment provided (or purchase a suitable one for your wall) to prevent tipping. Follow all instructions carefully.

Maintenance and Care

• Re-tighten all screws two weeks after assembly and every three months thereafter to ensure stability.
• For the frame, use a rag dipped in neutral detergent, then wipe dry with a clean rag.
• For glass materials, use a rag dampened with glass cleaner and dry with a dry rag.
• Do not use an electric screwdriver or excessive force during installation, as the boards can break easily.

Tools Required

[Illustration of various tools: screwdrivers, hammer, drill]

When installing, confirm that each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

Parts List

All screw holes are pre-drilled. Use hardware components in the correct reserved holes according to the figures and instructions. Do not drill holes yourself.

Hardware:

• A x 77 (Ø6x35mm)
• B x 77 (Ø14x9mm)
• D x 36 (Ø6x30mm)
• E x 12 (300mm)
• F x 50 (Ø4x16mm)
• G x 26 (Ø4x30mm)
• H x 2
• J x 2

Components:

• 1 x 1
• 2 x 1
• 3 x 1
• 4 x 1
• 5 x 3
• 6 x 3
• 7 x 3
• 8 x 6
• 9 x 2
• 10 x 3
• 11 x 3
• 12 x 3
• 13 x 6
• 14 x 6
• 15 x 6
• 16 x 6

[Diagram showing the arrangement of components with numbers]

Assembly Steps

1. Step 1: Insert quickfit screw(A) into plate 9 (x2) with a screwdriver. [Diagram showing screw A inserted into plate 9]
2. Step 2: Connect plate 9 with plate 10. Insert cam lock(B) into holes in plate 10 and turn clockwise to tighten. [Diagram showing plates 9 and 10 connected with cam locks B]
3. Step 3: Insert quickfit screw(A) into plate 4 with a screwdriver. [Diagram showing screw A inserted into plate 4]
4. Step 4: Attach the component to plate 4. Insert cam lock(B) into holes in plates 9, 10 and turn clockwise to tighten. [Diagram showing component attached to plate 4 with cam locks B]
5. Step 5: Flip plate 4 and insert quickfit screw(A) into corresponding holes. [Diagram showing plate 4 flipped and screws A inserted]
6. Step 6: Separate glide (E) into two parts. Fix the slide rail (E) to plates 5, 7, and 6 using screw (F). [Diagram showing slide rails E attached to plates 5, 7, 6 with screws F]
7. Step 7: Attach plates 5, 6, and 7 to plate 4 with wooden dowel (D) first. Insert cam lock(B) into holes in plates 5, 6, 7 and turn clockwise to tighten. [Diagram showing plates 5, 6, 7 attached to plate 4 with dowels D and cam locks B]
8. Step 8: Insert quickfit screw(A) into plate 3 with a screwdriver. [Diagram showing screw A inserted into plate 3]
9. Step 9: Slide plate 8 along grooves. Attach plate 3 to plates 5, 6, and 7 with wooden dowel (D) first. Insert cam lock(B) into holes in plates 5, 6, 7 and turn clockwise to tighten. [Diagram showing plate 8 slid into place and plate 3 attached with dowels D and cam locks B]
10. Step 10: Insert quickfit screw(A) into plate 3 with a screwdriver. [Diagram showing screw A inserted into plate 3]
11. Step 11: Attach plates 5, 6, and 7 to plate 3 with wooden dowel (D) first. Insert cam lock(B) into holes in plates 5, 6, 7 and turn clockwise to tighten. [Diagram showing plates 5, 6, 7 attached to plate 3 with dowels D and cam locks B]
12. Step 12: Insert quickfit screw(A) into plate 2 with a screwdriver. [Diagram showing screw A inserted into plate 2]
13. Step 13: Slide plate 8 along grooves. Attach plate 2 to plates 5, 6, and 7 with wooden dowel (D) first. Insert cam lock(B) into holes in plates 5, 6, 7 and turn clockwise to tighten. [Diagram showing plate 8 slid into place and plate 2 attached with dowels D and cam locks B]
14. Step 14: Insert quickfit screw(A) into plate 2 with a screwdriver. [Diagram showing screw A inserted into plate 2]
15. Step 15: Attach plates 5, 6, and 7 to plate 2 with wooden dowel (D) first. Insert cam lock(B) into holes in plates 5, 6, 7 and turn clockwise to tighten. [Diagram showing plates 5, 6, 7 attached to plate 2 with dowels D and cam locks B]
16. Step 16: Insert quickfit screw(A) into plate 1 with a screwdriver. [Diagram showing screw A inserted into plate 1]
17. Step 17: Slide plate 8 along grooves. Cover plate 1 to plates 5, 6, and 7 with wooden dowel (D) first. Insert cam lock(B) into holes in plates 5, 6, 7 and turn clockwise to tighten. [Diagram showing plate 8 slid into place and plate 1 covering plates 5, 6, 7 with dowels D and cam locks B]
18. Step 18: Fix plates 13 and 14 with plate 15 using screw (G). [Diagram showing plates 13 and 14 attached to plate 15 with screws G]
19. Step 19: Insert quickfit screw(A) into plates 11 (x3) and 12 (x3) with a screwdriver. Slide plate 16 along grooves. Attach plate 11/12 to plates 13 and 14, put cam lock(B) into holes in plates 13, 14 and turn clockwise to tighten. Fix runner (E) to plates 13 and 14 using screw (F). [Diagram showing drawer assembly with screws A, cam locks B, and runners E attached with screws F]
20. Step 20: Align rails, slide all drawers to corresponding positions. [Diagram showing drawers being inserted into the dresser]
21. Step 21: Fix cloth trip (H) to the back of the item using screw (F). [Diagram showing cloth trip H attached to the back with screw F]
22. Step 22: Install anti-tipping device. [Diagram showing anti-tipping device installation with screws G and J]

Warranty

Warranty Claims

• 30-day warranty for broken furniture or other issues. Warranty starts from the date of purchase, verified by proof of purchase.
• Contact FUFU&GAGA for queries. Provide purchase order number and details of the problem for replacement parts. Replacements arranged within 48 hours; shipping dates provided if out of stock.
• Product must be used according to instructions.
• Returned furniture must be cleaned and dried, and operated within 30 days of receipt.

Type of Warranty Claim

• Failure to follow instructions invalidates the warranty.
• Does not cover damage during installation, but covers damage during transportation.

Scope of Responsibility

• FUFU&GAGA is not responsible for misuse, user damage, or loss of parts during installation.
• Damage and scratches after use are not covered by the warranty.

Warranty Coverage (US)

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns

Changed Your Mind?

Follow the retailer's instructions for returns.

Defective Items

If an item is defective and the cause is unclear, please call FUFU&GAGA first.

Damaged Items

If an order has obvious shipping damage, refuse the delivery. If damage is found after acceptance, follow the retailer's specific instructions.

Always save all packaging material and paperwork. Disposing of packaging or attempting to return merchandise without contacting the fulfiller may jeopardize your claim and credit.