Dresser Assembly Instructions

Important Information

Before You Begin

Please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.

Assembly Tips

Avoid Scratches: To prevent scratching, this furniture should be assembled on a soft layer, such as a rug.

Improve Efficiency: Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

Anti-Topple Warning

Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

Maintenance and Care

It is important that any product assembled using screws is re-tightened 2 weeks after assembly, and once every 3 months, to ensure stability throughout the product's lifespan.

For regular maintenance and cleaning of the frame, use a rag dipped in neutral detergent, wipe it, and then dry with a clean rag. For glass materials, wipe with a rag dampened with glass cleaner, and then dry with a dry rag.

Do not use an electric screwdriver, and do not use excessive force when installing, as the board is easy to break.

Tools Required

Please prepare the following tools:

[Screwdriver Icon] [Drill Icon]

Parts List

When installing, please carefully confirm whether each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

• A (x42): 4 x 35 mm
• B (x90): 6 x 35 mm
• C (x90): 15 x 9 mm
• D (x34): 8 x 30 mm
• E (x18): 4 x 14 mm
• F (x4): 8 x 50 mm
• G (x72): 3 x 12 mm
• H (x2): 300 mm
• J (x2): 300 mm
• K (x16): 3 x 16 mm
• L (x16): 6 x 30 mm
• M (x2): 4 x 35 mm
• N (x2): 4 x 14 mm
• P (x4): 4 x 35 mm
• P (x2): 6 x 30 mm (for anti-tip device)
• Q (x1): 6 x 12 mm
• CL (x9): 300 mm
• CR (x9): 300 mm
• DL (x9): 300 mm
• DR (x9): 300 mm

Assembly Steps

Step 1

Screw eccentric rod (B) into board 3 and board 5 with a screwdriver. Fix rail (CL) and (CR) to board 3 and 5 respectively with screw (G).

Step 2

Screw eccentric rod (B) into board 2 with a screwdriver.

Step 3

Screw eccentric rod (B) into board 4. Fix rail (CL) with screw (G) at first. Flip the board to the back, screw eccentric rod (B) into and fix rail (CR) as well.

Step 4

Connect board 8 to board 4 using wooden dowel (F). Add cam lock (C) into board 8 and turn clockwise to tighten.

Step 5

Fix board 12 and 13 to board 4 with screw (A).

Step 6

Connect board 5 to boards 8, 12, and 13 using wooden dowel (D). Add cam lock (C) into boards 8, 12, 13 and turn clockwise to tighten.

Step 7

Connect board 8 to board 4. Add cam lock (C) into board 8 and turn clockwise to tighten.

Step 8

Insert back board 15 along available grooves.

Step 9

Connect board 3 to boards 8, 12, and 13 using wooden dowel (D). Add cam lock (C) into boards 8, 12, 13 and turn clockwise to tighten.

Step 10

Insert back board 15 along available grooves.

Step 11

Attach board 2 to the component using wooden dowel (D). Add cam lock (C) and turn clockwise to tighten.

Step 12

Insert part (Q) into board 2.

Step 13

Screw eccentric rod (B) into boards 21, 22, and 23.

Step 14

Fix board 17 and 18 to board 19 with screw (A).

Step 15

Insert bottom board 20 along available grooves.

Step 16

Attach board 21 to the component. Add cam lock (C) and turn clockwise to tighten.

Step 17

Attach board 22 to the component. Add cam lock (C) and turn clockwise to tighten.

Step 18

Attach board 23 to the component. Add cam lock (C) and turn clockwise to tighten.

Step 19

Fix runner (DL) and (DR) to board 17 and 18 with screw (G).

Step 20

Fix runner (DL) and (DR) to board 17 and 18 with screw (G).

Step 21

Fix runner (DL) and (DR) to board 17 and 18 with screw (G).

Step 22

Screw eccentric rod (B) into boards 6 and 7. Fix rail (CL) and (CR) to boards 6 and 7 respectively with screw (G).

Step 23

Screw eccentric rod (B) into board 10.

Step 24

Connect board 11 to board 10. Add cam lock (C) into board 11 and turn clockwise to tighten.

Step 25

Connect board 8 to board 7 using wooden dowel (D). Add cam lock (C) into board 8 and turn clockwise to tighten.

Step 26

Connect boards 14, 10, and 11 to board 7 using wooden dowel (D). Add cam lock (C) and turn clockwise to tighten.

Step 27

Insert back board 16 along available grooves.

Step 28

Connect board 6 to boards 14, 10, and 11 using wooden dowel (D). Add cam lock (C) and turn clockwise to tighten.

Step 29

Fix wheel (H) and (J) to board 10 with screw (E).

Step 30

Insert back board 16 along available grooves.

Step 31

Screw eccentric rod (B) into board 1.

Step 32

Attach board 1 to the component using wooden dowel (D). Add cam lock (C) and turn clockwise to tighten.

Step 33

Connect board 1 to board 2.

Step 34

Align rails, insert drawers (21, 22, 23) into corresponding positions.

Step 35

Insert buckle (L) into back slots and fix with screw (K). Fix strip (N) to board 1 with washer (P) and screw (E).

Step 36

Install anti-tipping device.

Warranty Information

Warranty Claims

There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase, which must be verified by proof of purchase.

Before making a claim, please call to discuss your query. Provide your purchase order number and details of the problem. A response will be arranged within 48 hours. If a part is out of stock, a shipping date will be provided.

The product must be used in accordance with the provided instructions for health reasons.

For returns, the furniture must be cleaned, dried, and returned within 30 days of receipt.

Type of Warranty Claim

Failure to follow the furniture instructions will invalidate the warranty.

This warranty does not cover damage during installation but does cover damage during transportation.

Scope of Responsibility

No responsibility will be accepted for misuse, user damage, or loss of parts during installation.

Damage and scratches occurring after use are not covered by the warranty.

Warranty Coverage (US)

Sheet parts: 1 month from the date of purchase.

Electrical parts: 1 month from the date of purchase.

Returns Policy

Changed Your Mind?

If you have changed your mind after purchase, please follow the retailer's instructions for returns.

Defective Items

If your item is defective and you cannot identify the cause, please call for assistance.

Damaged Items

If you receive an order with obvious shipping damage, refuse the delivery. If damage is found after acceptance, follow the retailer's specific instructions.

In all circumstances, save all packaging material and paperwork for the order. Disposing of packaging or attempting to return merchandise without contacting the fulfiller may jeopardize your claim and credit.

After-Sales Contact

Email: feedbackstation@163.com

Phone: (303)800-6387