STRANDAD Floor Lamp
By IKEA
Safety Information
Important: For indoor use only.
Warning: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If you are uncertain, please contact IKEA.
Assembly Instructions
Parts Overview
The main component is a cylindrical lampshade, quantity: 1.
Step 1: Base Assembly
Assemble the base structure by connecting the poles. Three connection points are indicated for securing the base poles.
Step 2: Pole Connection
Connect the pole sections together to form the main vertical support.
Step 3: Lamp Holder Attachment
Attach the lamp holder assembly to the top of the assembled pole structure.
Step 4: Securing Components
Secure the connected parts using clips. Ensure each clip engages with an audible 'click' sound.
Step 5: Pole Extension
Extend the main pole to the desired height. The diagram shows the pole sections sliding into each other.
Step 6: Bulb Installation
Insert the light bulb into the lamp holder. Screw on the protective cap to secure the bulb and lamp holder assembly.
Step 7: Lampshade Placement
Place the cylindrical lampshade onto the base structure, aligning it with the support frame.
Step 8: Lampshade Securing (Part 1)
Secure the lampshade by engaging two clips that attach it to the frame.
Step 9: Lampshade Securing (Part 2)
Further secure the lampshade to ensure it is stable.
Step 10: Final Check
Perform a final check of the assembly to ensure all parts are securely attached and the lamp is stable.
