SKAFTET Floor Lamp
Brand: IKEA
Important Safety Instructions
⚠️ IMPORTANT SAFETY INSTRUCTIONS
This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat the safety purpose of the polarized attachment plug. Do not alter the plug.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING: Deviation from the assembly instructions may result in a risk of fire or electric shock.
French Summary:
CONSIGNES DE SÉCURITÉ IMPORTANTES: Ce produit est muni d'une fiche polarisée. Pour des raisons de sécurité, cette fiche ne s'insère que d'une seule façon dans la prise polarisée. Si la fiche ne s'insère pas complètement, inverser la fiche. Si vous n'arrivez toujours pas à insérer la fiche, consultez un électricien qualifié. Ne jamais utiliser un fil de rallonge à moins que la fiche ne puisse être insérée complètement. Ne jamais tenter de déjouer le dispositif de sécurité de la fiche. Ne jamais modifier la fiche.
AVERTISSEMENT: POUR EVITER TOUT RISQUE DE CHOC ELECTRIQUE, INTRODUIRE LA FICHE LARGE DANS LA FENTE LARGE DE LA PRISE DE COURANT EN S'ASSURANT QU'ELLE S'INSERE COMPLETEMENT.
ATTENTION: Tout écart par rapport aux instructions d'assemblage peut entraîner un risque d'incendie ou de choc électrique.
Spanish Summary:
INSTRUCCIONES IMPORTANTES DE SEGURIDAD: Este producto tiene un enchufe polarizado para reducir el riesgo de calambres. Este enchufe sólo se podrá enchufar de una forma. Si el enchufe no se puede introducir completamente en la toma, gíralo. Si sigue sin poderse enchufar, contactar con un electricista cualificado. Nunca se debe usar un alargador si el enchufe no se puede enchufar de forma correcta. Nunca se debe alterar el dispositivo de seguridad del alargador polarizado. No manipular el enchufe.
ADVERTENCIA: PARA EVITAR CALAMBRES, LA PATILLA ANCHA DEL ENCHUFE DEBE COINCIDIR CON LA RANURA ANCHA E INTRODUCIRSE COMPLETAMENTE.
ADVERTENCIA: No seguir las instrucciones de montaje puede resultar en incendio o descarga eléctrica.
Parts Included
- 1x Allen key (for securing pole sections)
- 1x Allen key (for securing arm/lamp holder)
- 1x Slotted circular component (for base)
- 5x Screws (for base and pole connections)
- 1x Flat washer (for base)
- 1x Hex bolt (for base)
Note: Quantities and types of screws/bolts may vary slightly based on specific assembly steps.
Assembly Instructions
Step 1: Assemble the Base
Place the circular base plate on a flat surface. Insert the threaded rod through the central hole of the base plate. Place a flat washer onto the rod, followed by the slotted circular component. Secure this assembly from underneath with one of the screws.
Step 2: Attach the Lower Pole Section
Insert the lower pole section into the base assembly. Align the holes and use one of the screws and the appropriate Allen key to secure the pole section to the base.
Step 3: Attach the Middle Pole Section
Insert the middle pole section into the top of the lower pole section. Align the holes and use one of the screws and the Allen key to secure the sections together.
Step 4: Attach the Arched Arm
Insert the arched arm into the top of the middle pole section. Align the holes and use one of the screws and the Allen key to secure the arm to the pole assembly.
Step 5: Attach the Lamp Holder Assembly
Connect the lamp holder assembly to the end of the arched arm. Align the holes and use one of the screws and the Allen key to secure the lamp holder.
Step 6: Secure the Lamp Holder
Adjust the lamp holder to the desired angle. Use the remaining screw and Allen key to tighten the joint, ensuring the lamp holder is firmly in place.
Step 7: Install the Light Bulb
Ensure the lamp is unplugged. Screw a compatible light bulb (maximum 40W) into the socket. The bulb should be securely fitted.
Lamp Shade Requirements
Important: Use only an open top and open bottom lamp shade. For your safety, the dimensions of the shade must be in accordance with the minimum dimensions listed below. Use a maximum 40 watt bulb.
WARNING: USE SHADES ONLY IN THE VERTICAL POSITION. ANY DEVIATION FROM THESE INSTRUCTIONS MAY CONSTITUTE A FIRE HAZARD.
Dimensions for Shade Compatibility:
- Minimum diameter at widest point: Ø 91 mm (3 5/8")
- Minimum height clearance: 51 mm (2")
- Shade must be positioned vertically (90° angle relative to the arm).
French Summary:
Utiliser uniquement un abat-jour ouvert sur le dessus et sur le dessous. Pour votre sécurité, les dimensions de l'abat-jour doivent correspondre aux dimensions minimums indiquées. Utiliser une ampoule de 40 W maximum.
ATTENTION: LES ABAT-JOUR DOIVENT ETRE UTILISES EN POSITION VERTICALE. TOUT AUTRE UTILISATION PEUT ENTRAINER UN RISQUE D'INCENDIE.
Spanish Summary:
Utilizar únicamente una pantalla que sea abierta por la parte superior y la inferior. Por motivos de seguridad deben coincidir las medidas de la pantalla con las medidas mínimas indicadas. Bombilla recomendada máx. 40W.
ADVERTENCIA: SÓLO UTILIZAR PANTALLAS COLOCADAS VERTICALMENTE. CUALQUIER VARIACIÓN DE ESTAS INSTRUCCIONES PUEDE ENTRAÑAR RIESGO DE INCENDIO.
Final Check
Ensure all screws are tightened and the lamp is stable. The lamp is now ready for use.
