STRANDAD Floor Lamp Assembly Instructions
Product Model: AA-2489671-3
Safety Information
[?] For indoor use only.
If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, their service agent, or a similar qualified person to avoid a hazard. If you are uncertain, please contact IKEA.
Assembly Steps
Step 1: Assemble Base Frame
Begin by assembling the base frame. This involves connecting three main components. [?] Refer to the detailed diagrams for correct alignment and connection points.
Visual description: The diagram shows three curved metal rods being connected to a central ring structure, forming the base. Three connection points are highlighted with '3x'.
Step 2: Attach Vertical Pole to Base
Attach the main vertical pole to the assembled base frame. The pole is inserted into a fitting on the base and secured.
Visual description: A vertical pole is shown being inserted into the base assembly. An upward arrow indicates the direction of insertion. A close-up shows a threaded connection being made.
Step 3: Route Power Cord
Thread the power cord through the assembled vertical pole. The cord is then connected to the internal wiring at the top of the pole.
Visual description: The power cord is shown being fed down through the central pole. A close-up shows the cord being connected to a socket or terminal block at the top of the pole.
Step 4: Attach Lamp Head Structure
Connect the lamp head's supporting structure to the top of the vertical pole. This involves three attachment points, indicated by '3x' and a 'Click!' sound effect.
Visual description: A three-armed bracket is shown being attached to the top of the pole. Two close-ups show the bracket snapping into place with an audible '[click]' at three points.
Step 5: Extend Vertical Pole
Extend the vertical pole by joining two sections together. The sections are pushed into each other to form a longer pole.
Visual description: The vertical pole is shown as two separate sections that are being joined. Arrows indicate pushing the top section down onto the bottom section to extend the pole.
Step 6: Attach Lampshade Support
Attach the lampshade support structure to the top of the extended vertical pole. A tightening mechanism is used to secure it.
Visual description: A circular frame or support structure is shown being attached to the top of the pole. A circular arrow indicates tightening a screw or nut to secure it.
Step 7: Install Top Finial
Attach the decorative cap or finial to the very top of the vertical pole.
Visual description: A cap or finial is shown being screwed onto the threaded top of the vertical pole. An upward arrow indicates its placement.
Step 8: Mount Lampshade
Place the lampshade onto the assembled frame and secure it using the tightening mechanism at the base of the shade.
Visual description: The cylindrical lampshade is shown being lowered onto the frame. A close-up shows a knob or screw being turned to secure the shade to the frame.
Step 9: Final Shade Securing
Ensure the lampshade is properly secured. This step involves attaching or securing the shade at two points, indicated by '2x'.
Visual description: The lampshade is shown in its final position. Two close-ups indicate securing the bottom edge of the shade to the frame, possibly by clipping or fastening.
Step 10: Completed Lamp
The assembly is now complete. The STRANDAD floor lamp is ready for use.
Visual description: An illustration of the fully assembled STRANDAD floor lamp.
