ISJAKT Floor Lamp Assembly Instructions

Safety Information

⚠️ English: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If you are uncertain, please contact IKEA.

עברית: במידה ונגרם נזק לכבל של גוף תאורה זה, החלפתו תתבצע אך ורק על ידי היצרן, מעבדת תיקונים מורשה או איש מקצוע מורשה כדי למנוע סכנה. אם אינכם בטוחים, אנא צרו קשר עם חנות IKEA.

Assembly Steps

Step 1: Assemble the lower section of the lamp pole by attaching washers and nuts to the threaded rod.

Step 2: Attach the main pole to the base. A close-up shows securing a component with two screws or bolts (2x).

Step 3: Secure the base assembly using the provided tool. A detailed view shows the connection point and the tool in use.

Step 4: Continue securing components by tightening nuts with the provided tool.

Step 5: Insert and thread the upper pole section into the base assembly.

Step 6: Connect the upper and lower pole sections. A close-up illustrates the threaded connection mechanism.

Step 7: Attach the adjustable lamp arm to the main pole. A close-up shows the connection and a knob for adjustment.

Additional Information & Features

Illustration showing correct handling of parts on a surface (left) and incorrect handling with tools (right).

Illustration of a person unsure about assembly, then consulting IKEA for help.

A single tool, labeled '1x', provided for assembly.

ⓘ Information icon: Connect the power adapter to the device.

Diagrams showing the adjustable lamp head's range of motion: horizontal rotation and vertical tilt.

Diagrams illustrating the lamp's dimming functionality. The controls allow for adjusting light intensity, indicated by a gradient from a dim bulb to a bright bulb.