Hooke Road
MAKE A DIFFERENCE
Front Bumper
BXG.1068-S (INSTALLATION INSTRUCTION)
ATTENTION
Please verify all parts are present and read instructions carefully before starting installation. Please feel free to contact your distributor if you have any kind of question about your purchase.
CONTENTS
A1&A2: Fixed Plates
Bx2: Connect Tubes(1)
C1&C2: Bend Tubes
Dx2: Short Tubes
E: Main Body
F1&F2: Wings
G1&G2: Connect Tubes(2)
H: License Plate Bracket
I1&I2: Long Tubes
Parts List:
| Qty | Part Name | Size(mm) | Picture |
|---|---|---|---|
| 4 | Hex Bolt | M12*30 | [Hex Bolt M12*30] |
| 10 | Button Bolt | M8*65 | [Button Bolt M8*65] |
| 8 | Button Bolt | M8*30 | [Button Bolt M8*30] |
| 8 | Button Bolt | M8*20 | [Button Bolt M8*20] |
| 2 | Button Bolt | M6*16 | [Button Bolt M6*16] |
| 26 | Split Lock Washer | D8 | [Split Lock Washer D8] |
| 2 | D-rings | [D-ring] | |
| 2 | Split Lock Washer | D6 | [Split Lock Washer D6] |
| 4 | Flat Washer | 15*50 | [Flat Washer 15*50] |
| 26 | Flat Washer | M8*16*1.5 | [Flat Washer M8*16*1.5] |
| 2 | Flat Washer | M6*12*1 | [Flat Washer M6*12*1] |
| 16 | Flange Hex Lock Nut | M8 | [Flange Hex Lock Nut M8] |
| 2 | Flange Hex Lock Nut | M6 | [Flange Hex Lock Nut M6] |
TOOLS REQUIRED
- Drive Ratchet Handle
- 10mm, 13mm Wrench
- 4mm, 5mm Hex Bit Socket
- 19mm Wrench
To view online instruction, please scan the QR code. [QR Code]
INSTALLATION INSTRUCTION
Step 1
Place the vehicle in park, remove the factory bumper from the frame.
[Image of vehicle front end with factory bumper removed]
Step 2
Connect Tubes(2) & Long Tubes Assembly. Do not fully tighten to allow adjustability.
- (4) M8x20 Button Bolts
- (4) D8 Lock Washers
- (4) M8x16x1.5 Flat Washers
[Diagram showing connection of tubes and long tubes with hardware]
Step 3
Connect Tubes(2) & Main Body Assembly. Do not fully tighten to allow adjustability.
- (6) M8x30 Button Bolts
- (6) D8 Lock Washers
- (6) M8x16x1.5 Flat Washers
- (6) M8 Flange Hex Lock Nuts
[Diagram showing connection of tubes and main body with hardware]
Step 4
The Wings Assembly. Tighten the hardware.
- (4) M8x20 Button Bolts
- (4) D8 Lock Washers
- (4) M8x16x1.5 Flat Washers
[Diagram showing attachment of wings to the main body assembly]
Step 5
The Connect Tubes(1) Assembly. Do not fully tighten to allow adjustability.
- (2) M8x65 Button Bolts
- (2) M8x30 Button Bolts
- (4) D8 Lock Washers
- (4) M8x16x1.5 Flat Washers
- (2) M8 Flange Hex Lock Nuts
[Diagram showing connection of connect tubes (1) to the bumper assembly]
Step 6
Bend Tubes & Short Tubes Assembly. Adjust the accessories to the desired location. Finally, tighten up all bolts.
- (8) M8x65 Button Bolts
- (8) D8 Lock Washers
- (8) M8x16x1.5 Flat Washers
- (8) M8 Flange Hex Lock Nuts
- Fixed Plates
[Diagram showing attachment of bend tubes and short tubes]
Step 7
The License Plate Bracket Assembly. Tighten the hardware.
- (2) M6x16 Button Bolts
- (2) D6 Lock Washers
- (2) M6x12x1 Flat Washers
- (2) M6 Flange Hex Lock Nuts
[Diagram showing attachment of license plate bracket]
Step 8
Install the bumper to the vehicle. Adjust the bumper to the desired location. Finally, tighten up all bolts.
- (4) M12x30 Hex Bolts
- (4) 15x50 Flat Washers
[Image showing bumper installation onto the vehicle frame]
Step 9
The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
[Image of the fully installed front bumper on a vehicle]
Feel Free To Share Your Vehicle @HookeRoad4x4 With The Hashtag #hookeroad If You'd Like
Google Hooke Road to find your parts. [Social Media Icons: Facebook, Instagram, TikTok]
