Hooke Road Front Bumper
Model: BXG.8008
Installation Instruction
⚠️ ATTENTION: Please verify all parts are present and read instructions carefully before starting installation. Please feel free to contact your distributor if you have any kind of question about your purchase.
? Contents
Parts List
| Qty | Part Name | Size(mm) | Description |
|---|---|---|---|
| 4 | Hex Bolt | M12×35 | Main Body Attachment |
| 6 | Hex Bolt | M12×30 | Wing Attachment |
| 2 | Button Bolt | M6×16 | License Plate Bracket Attachment |
| 10 | Split Lock Washer | D12 | For M12 Bolts |
| 14 | Flat Washer | M12×30×2 | For M12 Bolts |
| 2 | Flat Washer | M6×12×1 | For M6 Bolts |
| 10 | Hex Nut | M12 | For M12 Bolts |
| 2 | Nylon Lock Nut | M6 | For M6 Bolts |
| 2 | EVA | Protective Padding |
Component Descriptions
- A: Main Body - The primary structure of the front bumper.
- B1 & B2: Wings - Side sections of the bumper.
- C: License Plate Bracket - Mount for the vehicle's license plate.
⚙️ Tools Required
- Drive Ratchet Handle
- 10mm, 19mm Wrench
- 4mm Hex Bit Socket
- 19mm Shallow Socket
To view online instructions, please scan the QR code provided with the product or visit the Hooke Road website for detailed video guides.
Installation Instructions
Step 1
Place the vehicle in park. Remove the factory bumper from the frame.
[Visual Description: The vehicle is shown parked, with the original front bumper detached from the frame.]
Step 2
First, attach the EVA padding to the main body of the Hooke Road bumper. Align the outer profile with the inner profile and tighten the hardware.
Repeat this step on the other side of the bumper using the following hardware:
- (2) EVA padding
- (6) M12×30 Hex Bolts
- (6) M12×30×2 Flat Washers
- (6) D12 Split Lock Washers
- (6) M12 Hex Nuts
[Visual Description: Diagrams illustrate attaching the EVA protective padding to the main bumper body, then connecting the bumper wings to the main body using bolts, washers, and nuts.]
Step 3
Secure the license plate bracket to the bumper and tighten the hardware.
- (2) M6×16 Button Bolts
- (2) M6×12×1 Flat Washers
- (2) M6 Nylon Lock Nuts
[Visual Description: A diagram shows the license plate bracket being attached to the bumper assembly using smaller bolts, washers, and lock nuts.]
Step 4
Secure the assembled bumper to the vehicle frame. Adjust the bumper to the desired position. Repeat this step on the other side of the vehicle. Finally, tighten all bolts.
- (4) M12×35 Hex Bolts
- (8) M12×30×2 Flat Washers
- (4) D12 Split Lock Washers
- (4) M12 Hex Nuts
[Visual Description: Diagrams show the main bumper assembly being mounted to the vehicle's frame using larger bolts, washers, and nuts, with adjustments being made for positioning.]
Step 5
The installation is complete. Enjoy your new Hooke Road front bumper and your off-road adventures!
[Visual Description: An image displays the completed installation of the Hooke Road front bumper on a vehicle.]
