CYCPLUS A2 Smart Tire Inflator

Product Overview

The CYCPLUS A2 is a smart, portable electric tire inflator designed for various applications including cars, bicycles, motorcycles, and sports balls. It features a compact design, an LED display, multiple pressure units, and a built-in flashlight and power bank function.

Device Description: The device is a sleek, elongated rectangular unit with rounded edges. It features a prominent LED screen displaying pressure and battery status. Control buttons are located below the screen, typically labeled with symbols like Power (often represented by a circle with a line or 'U'), Unit (U), Plus (+), and Minus (-). An air vent port is located at one end, and a USB output port for power bank functionality is at the other. A flashlight LED is integrated into the device.

Packing List

• A. Inflator
• B. Air Tube
• C. Presta Valve Converter
• D. Ball Needle
• E. Type-C Charging Cable
• F. Storage Bag
• G. Bike Mount
• H. Screwdriver
• I. Screws (x2)
• J. Non-slip Mat
• K. Velcro Strap
• L. User Manual

Product Details

• Flashlight: Integrated LED light for illumination. ?
• Vent Port: Outlet for air inflation.
• Air Tube Hole: Connection point for the air tube.
• Type-C Charging Port: For recharging the device.
• USB Output: Allows the device to function as a power bank.
• LED Screen: Displays pressure, units, and battery level.
• Buttons: Unit Button, Power Button, '+' Button, '-' Button for control.

Button Functions

Inflation Guide

Recommended reference pressures and inflation times for various types of tires and balls.

Valve Installation

Connect the air tube to the pump and then to the valve stem. Use appropriate adapters as needed.

• Schrader Valve: Standard car tire valve. Connect directly.
• Presta Valve: Common on road bikes. Requires the Presta Valve Converter (C).
• Ball Valve: For sports balls. Requires the Ball Needle (D).

Diagram Description: Illustrations show the air tube (B) connecting to different valve types. For Schrader, it's a direct connection. For Presta, the Presta Valve Converter (C) is shown between the tube (B) and the valve. For Ball, the Ball Needle (D) is shown connected to the tube (B).

Operation

1. Connection: Connect the metal end of the air tube to the pump and thread the other end onto the valve stem. For Presta valves, install the Presta Valve Converter first. For balls, install the Ball Needle first.
2. Start Up: Long press the Power Button until the screen lights up, displaying the current pressure.
3. Set Target Pressure:
   • Short press the Unit Button to cycle through pressure units (PSI, BAR, KPA, kgf/cm²).
   • Use the '+' and '-' buttons to adjust the target air pressure value.
   • The screen will flash twice after you stop setting, then display the current air pressure.
4. Inflation: Short press the Power Button to start inflating. Press again to pause/continue. The inflator will stop automatically when the target pressure is reached.
5. Shutdown: Long press the Power Button to turn off. The device will also shut down automatically after 1 minute of inactivity.
6. Flashlight: Long press the Unit Button to turn the LED flashlight on or off.

Power Bank Function

Charge your mobile devices via the USB output port. The power output is 5V 2A max. The inflator cannot function as a power bank while it is actively inflating.

Recharging

1. Fully recharge the inflator before first use or after prolonged idleness.
2. During charging, the battery level indicator on the screen will flash. It will be fully lit when charging is complete.
3. It is recommended to charge the inflator every three months, even if not in use, to prevent battery damage due to deep discharge.

Safety Attentions ⚠️

• It is normal for the inflator and air tube to become warm after working for more than 1 minute. Do not touch hot parts.
• Check the inflator for any abnormalities before use. Do not use if damaged.
• If abnormal sounds or excessive temperatures occur during inflation, stop immediately.
• Ensure smooth airflow; do not bend or pinch the air tube.
• The compressor may produce sparks. Keep away from flammable and explosive objects.
• Do not leave the inflator unattended while in operation.
• After prolonged use, allow the device to cool down before using it again.
• Avoid dirt, water immersion, and dropping the device.
• Do not use harsh chemicals or cleaning agents for cleaning.
• Store in a cool, dry place, away from extreme temperatures.
• Keep out of reach of children. This is not a toy.
• Do not inflate air into body parts (mouth, ears, eyes) of people or animals.
• Do not use the inflator while it is charging.

Bike Mount Installation

Instructions for attaching the bike mount:

1. Fix the bike mount onto the bicycle's bottle cage position and tighten the screws.
2. Attach the non-slip mat along the edges of the U-shaped groove.
3. Insert the inflator, ensuring the screen faces upwards. Tighten the velcro strap to secure the device.

Diagram Description: Three illustrations show the steps for attaching the mount to a bicycle frame, including securing screws and attaching the inflator with a velcro strap.

Technical Specifications

Manufacturer Information

Manufacturer: Chengdu Chendian Intelligent Technology Co., Ltd

Warranty: Free replacement or repair within 1 year from the date of purchase.

After-sales Email: steven@cycplus.com

Certificate of Conformity

Brand: CYCPLUS

Model Name: A2

Product Name: Smart Tire Inflator (智能电动充气筒)

Implementation Standard: Q/CDZN 001-2023

Inspector: Passed Inspection (检验合格)

The product has been tested and proved to be qualified for delivery.

Manufacturer: Chengdu Chendian Intelligent Technology Co., Ltd

Authorized Representatives:

• EUBRIDGE ADVISORY GMBH (EC REP), Virginia Str. 2, 35510 Butzbach, Germany
• TANMETINT'L BUSINESS LTD (UK REP), 9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR, UK

Certifications: CE, UKCA

Recycling Information: Cet appareil, ses accessoires, cordons et batteries se recyclent. (This device, its accessories, cords, and batteries are recyclable.) ♻️

Origin: MADE IN CHINA