Assembly Tips
- Remove hardware from box and sort by size.
- Please check to see that all hardware and parts are present prior to start of assembly.
- Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning
⚠️ 1. Do not attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
[Home Use Icon] 2. This product is for home use only and not intended for commercial establishments.
Assembly Time: 6 MINUTES
Parts Identification
| Part | Description | Figure Description | Quantity |
|---|---|---|---|
| A | BIG METAL FRAME 1 | Oval frame with crossbars, 740x545mm | 1PC |
| B | BIG METAL FRAME 2 | Oval frame with crossbars, 740x505mm | 1PC |
| C | BIG CIRCLE FRAME | Circular frame, Ø 600mm | 1PC |
| D | BIG TOP GLASS | Large oval glass top, 1210x810mm | 1PC |
| E | SMALL METAL FRAME 1 | Oval frame with crossbars, 695x505mm | 2PCS |
| F | SMALL METAL FRAME 2 | Oval frame with crossbars, 695x465mm | 2PCS |
| G | SMALL CIRCLE FRAME | Circular frame, Ø 488mm | 2PCS |
| H | SMALL TOP GLASS | Small oval glass top, Ø 660mm | 2PCS |
Hardware Identification
| No. | Description | Figure Description | Quantity |
|---|---|---|---|
| 1 | EXTRA LONG BOLT (M6*30) | Bolt with hexagonal head and threaded shaft | 6PCS |
| 2 | LONG BOLT (M6*25) | Bolt with hexagonal head and threaded shaft | 12PCS |
| 3 | SHORT BOLT (M6*10) | Bolt with hexagonal head and threaded shaft | 12PCS |
| 4 | ADJUSTABLE TABLE LEG | Threaded leg with a base, screw-in type | 24PCS |
| 5 | METAL WASHER | Flat metal ring | 12PCS |
| 6 | ALLEN WRENCH | L-shaped hexagonal tool | 1PC |
Assembly Steps
Step 1
Attach the BIG METAL FRAME 1 (A) and BIG METAL FRAME 2 (B) to the BIG CIRCLE FRAME (C). Use two LONG BOLTS (2) for each connection point where parts A and B meet C. The diagram shows two A parts and two B parts connecting to C, secured by 2 bolts (2) each.
Step 2
Attach the ADJUSTABLE TABLE LEGS (4) to the bottom of the assembled frame structure. The diagram shows four legs (4) being attached to the lower part of the frame.
Step 3
Place the BIG TOP GLASS (D) onto the assembled frame. Secure the glass using SHORT BOLTS (3) and METAL WASHERS (5). The diagram shows the glass (D) placed on top, secured with three bolts (3) and three washers (5) at each of the three connection points.
Step 4
This step visually confirms the completion of the large table assembly from Step 3.
Step 5
Assemble the smaller tables. Attach the SMALL METAL FRAME 1 (E) and SMALL METAL FRAME 2 (F) to the SMALL CIRCLE FRAME (G). Secure the SMALL TOP GLASS (H) using SHORT BOLTS (3) and METAL WASHERS (5). The diagram shows the glass (H) placed on top of a smaller frame structure, secured with three bolts (3) and three washers (5) at each of the three connection points. This process is repeated for the second small table.
Step 6
This step visually confirms the completion of the smaller table assemblies from Step 5.
Product Dimensions
Large Table
- Top Glass Diameter: 32 inches
- Base Structure Width: 23 inches
- Base Structure Depth: 22.25 inches
- Overall Height: 18.75 - 19 inches
Small Table (x2)
- Top Glass Diameter: 16.25 inches
- Base Structure Width: 19.5 inches
- Base Structure Depth: 21.75 inches
- Overall Height: 18.75 - 19 inches
