Manuals+

Orren Ellis Glass Top Tables: Assembly Instructions

This document provides assembly instructions for Orren Ellis glass top end tables, cocktail tables, and sofa tables. It includes general glass care advice, detailed parts lists, and step-by-step assembly guides for each table type.

Glass Care and Cleaning

Important Note: The label is to be removed by the consumer only.

If glass is chipped or broken, stop using the product and consult a retail store.

Warnings:

  1. Do not place very hot or cold items on glass surface(s), unless adequately thick table mats are used, to prevent such items from coming in contact with glass.
  2. Do not sit or stand upon horizontal glass surface(s).
  3. Do not use the glass as a chipping surface. Do not strike the glass with hard or pointed items.
  4. When cleaning glass, use a damp cloth. Do not use abrasive powders or any other substances containing abrasives as these can scratch the surface.
  5. NEVER put a TV on this product.

End Table Assembly Instructions

CAUTION: PLEASE READ ALL INSTRUCTIONS BEFORE STARTING THE ASSEMBLY OF THIS PRODUCT. THESE PIECES ARE HEAVY. IN ORDER TO PREVENT PERSONAL INJURY AND ENSURE THAT THIS PRODUCT IS NOT DAMAGED DURING THE ASSEMBLY PROCESS, IT IS STRONGLY RECOMMENDED TO ENLIST THE ASSISTANCE OF ONE OR MORE PERSONS. IN CASE OF EXCESS STAIN, WIPE THE BOTTOM OF THE UNIT BEFORE PLACING ON ANY SURFACE.

WARNING: PROTECTIVE GLIDE IS PLACED UNDER EACH LEG OF THE FURNITURE TO RESIST SCRATCHES ON FLOOR SURFACE. SOME FLOOR SURFACES CAN BE EXTRA SENSITIVE TO SCRATCHES AND MARKINGS, IF YOU ARE NOT SURE CONSULT WITH YOUR DEALER.

Parts and Hardware List:

Hardware:

No./Name Description Quantity
A 5/16" Flat Washer (3/4" x 1/16") 4 PCS
B 5/16" Lock Washer (1/2" x 1/16") 4 PCS
C 5/16" Bolt (1-5/8" Length) 3 PCS
D 5/16" Bolt (1-3/8" Length) 1 PC
E 1/4" Bolt (3/4" Length) 6 PCS
F 1/4" Flat Washer (3/4") 6 PCS
G 1/4" Lock Washer (3/8") 6 PCS
H Metal Plate 2 PCS
I 5/32" Allen Key 1 PC

Components:

No./Name Description Quantity
1 Top Glass 1 PC
2 Leg Frame 1 PC
3 Leg L 1 PC
4 Stretcher Support Glass 1 PC

Assembly Steps:

  1. Step 1:

    Attach the two Leg Frames (Parts 2 and 3) to the Stretcher Support Glass (Part 4). Use six 1/4" Bolts (E), six 1/4" Flat Washers (F), six 1/4" Lock Washers (G), and two Metal Plates (H). Insert bolts through washers, lock washers, and metal plates, then through the frames and stretcher support. Tighten securely.

    Diagram Description: Shows two leg frames being connected to the stretcher support piece using the specified hardware and metal plates.

  2. Step 2:

    Attach the assembled leg structure to the underside of the Top Glass (Part 1). Use three 5/16" Bolts (C), one 5/16" Bolt (D), three 5/16" Flat Washers (A), three 5/16" Lock Washers (B), and two Metal Plates (H). Align the leg frames with the pre-drilled holes on the Top Glass. Insert bolts through washers, lock washers, and metal plates, then through the leg frames and into the Top Glass. Tighten securely.

    Diagram Description: Shows the leg assembly being secured to the glass top using bolts, washers, lock washers, and metal plates.

  3. Step 3:

    Ensure all connections are secure. The main structure is now assembled.

    Diagram Description: Illustrates the two primary components of the table being brought together.

  4. Step 4:

    Complete the assembly. The End Table is now ready for use.

    Diagram Description: Shows the fully assembled End Table. Includes a note: [Not Suitable for TV] ?❌.

NOTE: Spirit level not included but necessary to level product on floor.

WARNING: ONLY USE THE HAND TOOLS PROVIDED.

Cocktail Table Assembly Instructions

CAUTION: PLEASE READ ALL INSTRUCTIONS BEFORE STARTING THE ASSEMBLY OF THIS PRODUCT. THESE PIECES ARE HEAVY. IN ORDER TO PREVENT PERSONAL INJURY AND ENSURE THAT THIS PRODUCT IS NOT DAMAGED DURING THE ASSEMBLY PROCESS, IT IS STRONGLY RECOMMENDED TO ENLIST THE ASSISTANCE OF ONE OR MORE PERSONS. IN CASE OF EXCESS STAIN, WIPE THE BOTTOM OF THE UNIT BEFORE PLACING ON ANY SURFACE.

WARNING: PROTECTIVE GLIDE IS PLACED UNDER EACH LEG OF THE FURNITURE TO RESIST SCRATCHES ON FLOOR SURFACE. SOME FLOOR SURFACES CAN BE EXTRA SENSITIVE TO SCRATCHES AND MARKINGS, IF YOU ARE NOT SURE CONSULT WITH YOUR DEALER.

Parts and Hardware List:

Hardware:

No./Name Description Quantity
A 5/16" Flat Washer (3/4" x 1/16") 4 PCS
B 5/16" Lock Washer (1/2" x 1/16") 4 PCS
C 5/16" Bolt (1-5/8" Length) 3 PCS
D 5/16" Bolt (1-3/8" Length) 1 PC
E 1/4" Bolt (3/4" Length) 6 PCS
F 1/4" Flat Washer (3/4") 6 PCS
G 1/4" Lock Washer (3/8") 6 PCS
H Metal Plate 1 PC
I 5/32" Allen Key 1 PC

Components:

No./Name Description Quantity
1 Top Glass 1 PC
2 Leg Frame 1 PC
3 Leg L 1 PC
4 Stretcher Support Glass 1 PC

Assembly Steps:

  1. Step 1:

    Attach the two Leg Frames (Parts 2 and 3) to the Stretcher Support Glass (Part 4). Use six 1/4" Bolts (E), six 1/4" Flat Washers (F), six 1/4" Lock Washers (G), and one Metal Plate (H). Insert bolts through washers, lock washers, and the metal plate, then through the frames and stretcher support. Tighten securely.

    Diagram Description: Shows two leg frames being connected to the stretcher support piece using the specified hardware and a single metal plate.

  2. Step 2:

    Attach the assembled leg structure to the underside of the Top Glass (Part 1). Use three 5/16" Bolts (C), one 5/16" Bolt (D), three 5/16" Flat Washers (A), three 5/16" Lock Washers (B), and one Metal Plate (H). Align the leg frames with the pre-drilled holes on the Top Glass. Insert bolts through washers, lock washers, and the metal plate, then through the leg frames and into the Top Glass. Tighten securely.

    Diagram Description: Shows the leg assembly being secured to the glass top using bolts, washers, lock washers, and a single metal plate.

  3. Step 3:

    Ensure all connections are secure. The main structure is now assembled.

    Diagram Description: Illustrates the two primary components of the table being brought together.

  4. Step 4:

    Complete the assembly. The Cocktail Table is now ready for use.

    Diagram Description: Shows the fully assembled Cocktail Table. Includes a note: [Not Suitable for TV] ?❌.

NOTE: Spirit level not included but necessary to level product on floor.

WARNING: ONLY USE THE HAND TOOLS PROVIDED.

Sofa Table Assembly Instructions

CAUTION: PLEASE READ ALL INSTRUCTIONS BEFORE STARTING THE ASSEMBLY OF THIS PRODUCT. THESE PIECES ARE HEAVY. IN ORDER TO PREVENT PERSONAL INJURY AND ENSURE THAT THIS PRODUCT IS NOT DAMAGED DURING THE ASSEMBLY PROCESS, IT IS STRONGLY RECOMMENDED TO ENLIST THE ASSISTANCE OF ONE OR MORE PERSONS. IN CASE OF EXCESS STAIN, WIPE THE BOTTOM OF THE UNIT BEFORE PLACING ON ANY SURFACE.

WARNING: PROTECTIVE GLIDE IS PLACED UNDER EACH LEG OF THE FURNITURE TO RESIST SCRATCHES ON FLOOR SURFACE. SOME FLOOR SURFACES CAN BE EXTRA SENSITIVE TO SCRATCHES AND MARKINGS, IF YOU ARE NOT SURE CONSULT WITH YOUR DEALER.

Parts and Hardware List:

Hardware:

No./Name Description Quantity
A 5/16" Flat Washer (3/4" x 1/16") 5 PCS
B 5/16" Lock Washer (1/2" x 1/16") 5 PCS
C 5/16" Bolt (1-5/8" Length) 3 PCS
D 5/16" Bolt (1-3/8" Length) 2 PCS
E 1/4" Bolt (3/4" Length) 12 PCS
F 1/4" Flat Washer (3/4") 12 PCS
G 1/4" Lock Washer (3/8") 12 PCS
H Metal Plate 2 PCS
I 5/32" Allen Key 1 PC
J Tilt Kit Bracket 1 PC

Components:

No./Name Description Quantity
1 Top Glass 1 PC
2 Left Leg Frame 1 PC
3 Right Leg Frame 1 PC
4 Bottom Rail 1 PC
5 Stretcher Support Glass 1 PC

Assembly Steps:

  1. Step 1:

    Attach the Left and Right Leg Frames (Parts 2 and 3) to the Bottom Rail (Part 4). Use twelve 1/4" Bolts (E), twelve 1/4" Flat Washers (F), twelve 1/4" Lock Washers (G), and two Metal Plates (H). Insert bolts through washers, lock washers, and metal plates, then through the leg frames and bottom rail. Tighten securely.

    Diagram Description: Shows the two leg frames being connected to the bottom rail using the specified hardware and metal plates.

  2. Step 2:

    Attach the assembled leg structure to the underside of the Top Glass (Part 1). Use three 5/16" Bolts (C), two 5/16" Bolts (D), five 5/16" Flat Washers (A), and five 5/16" Lock Washers (B). Align the leg frames with the pre-drilled holes on the Top Glass. Insert bolts through washers and lock washers, then through the leg frames and into the Top Glass. Tighten securely.

    Diagram Description: Shows the leg assembly being secured to the glass top using bolts and washers.

  3. Step 3:

    Install the Stretcher Support Glass (Part 5) into the designated slots on the leg frames. Ensure it is seated correctly.

    Diagram Description: Illustrates the stretcher support glass being placed into the assembled frame.

  4. Step 4:

    Attach the Tilt Kit Bracket (J) to the rear of the unit as shown. This is for securing the table to a wall if desired.

    Diagram Description: Shows the tilt kit bracket being attached to the back of the assembled Sofa Table. Includes a note: [Not Suitable for TV] ?❌.

NOTE: Spirit level not included but necessary to level product on floor.

WARNING: ONLY USE THE HAND TOOLS PROVIDED.

Models: oris1000, ORIS1001, ORIS1002, ORIS1002 Khan Glass Top End Table, ORIS1002, Khan Glass Top End Table, Top End Table, End Table

File Info : application/pdf, 7 Pages, 2.40MB

PDF preview unavailable. Download the PDF instead.

oris1000 owner manual Microsoft: Print To PDF

Related Documents

Preview Orren Ellis 48" Modern Cloud Coffee Table Assembly Guide
Detailed installation instructions for the Orren Ellis 48" Modern Cloud Coffee Table, featuring a glossy white sintered stone top and four wood legs. Includes a comprehensive parts list and step-by-step assembly guidance.
Preview Orren Ellis Delonix 3-Piece Living Room Table Set Assembly Instructions
Detailed assembly instructions for the Orren Ellis Delonix 3-Piece Living Room Table Set, including parts identification, hardware list, and step-by-step assembly guidance.
Preview Orren Ellis 70.9'' Oval Sintered Stone Dining Table Assembly Instructions
A comprehensive guide for assembling the Orren Ellis 70.9'' Oval Sintered Stone Dining Table. This manual provides step-by-step instructions, including parts lists and detailed descriptions of visual aids, to ensure a smooth assembly process.
Preview Orren Ellis Lataria Dining Table Assembly Instructions
Step-by-step assembly instructions for the Orren Ellis Lataria 94.5" Rectangular Extendable Dining Table. Includes parts list and assembly guidance.
Preview Metal and Marble Drink Table Assembly Instructions | Orren Ellis
Step-by-step assembly instructions for the Orren Ellis Metal and Marble Drink Table (Model SAVC2456). Includes parts list and hardware details for easy setup.
Preview CT025 Coffee Table Assembly Guide - Orren Ellis
Step-by-step assembly guide for the Orren Ellis CT025 Coffee Table. Learn how to assemble your coffee table with clear instructions and helpful tips.
Preview Orren Ellis LFVI1135 Coffee Table Assembly Instructions
Step-by-step guide for assembling the Orren Ellis LFVI1135 Luxury Black Artificial Marble Coffee Table. Includes parts list and assembly procedures.
Preview Orren Ellis Contemporary Extendable Dining Table Assembly Instructions
Detailed assembly instructions for the Orren Ellis Contemporary Extendable Dining Table (Model W000138460), including parts list, hardware list, and step-by-step guidance for proper setup.