Assembly Steps
Step 1: Prepare the Legs
Attach the screw caps (part 2) to the top of each table leg (parts B and C). Insert two screw caps into the designated holes on the top of leg B and two on the top of leg C.
Parts Used: Part B (x1), Part C (x1), Part 2 (x4)
Visual Description: This step shows two tall, curved table legs, labeled B and C. Each leg has two circular indentations at its top. The image indicates that four screw caps (part 2) are to be inserted into these indentations, two per leg.
Step 2: Attach Legs to Tabletop
Place the tabletop (part A) upside down on a protected surface. Position the assembled legs (parts B and C) onto the underside of the tabletop, aligning the holes. Secure the legs to the tabletop using ten screws (part 1). Use the Allen key (part D) to tighten the screws.
Parts Used: Part A (x1), Part 1 (x10), Part D (x1)
Visual Description: This step shows the oval tabletop (A) upside down. The two prepared legs (B and C) are positioned on the underside. Ten screws (part 1) are shown being inserted from the underside of the tabletop into the base of the legs. The Allen key (D) is depicted, ready for use.
Step 3: Final Check
Once all pieces are correctly assembled, go back and fully tighten all screws. Your dining table is now assembled.
Visual Description: This step shows the fully assembled dining table standing upright. A text box indicates "Installation Completed".
