Instruction Book: Dining Table
Assembly instructions for the Orren Ellis 70.9'' Oval Sintered Stone Dining Table.
Step 1: Assemble the Base Pedestals
Parts Required:
- Part 1: Bolt (x2)
- Part 2: Bolt (x2)
- Part 4: Wooden Dowel (x1)
Assembly Description:
The diagram shows two vertical rectangular panels (pedestals). A horizontal rectangular piece (Part 4) is positioned between the lower ends of these panels. Pre-drilled holes are visible on the panels and the horizontal piece. Bolts (Part 1 and Part 2) are illustrated being inserted through the outer sides of the panels into the ends of the horizontal piece.
Step 2: Attach Base to Table Top
Parts Required:
- Part 6: Screw (x2)
- Part 7: Table Top (x1)
Assembly Description:
This diagram depicts the assembled base structure from Step 1. An oval table top (Part 7) is shown upside down, positioned above the base. Holes are indicated on the underside of the table top and the top of the base. Screws (Part 6) are illustrated being inserted through the base structure into the table top.
Step 3: Final Securing
Parts Required:
- Part 5: Screw (x10)
Assembly Description:
The illustration shows the table assembly from Step 2. Additional screws (Part 5) are depicted being inserted through various points of the base structure into the underside of the table top, suggesting final reinforcement.
