Orren Ellis 48" Modern Cloud Coffee Table Assembly Guide
A modern, cloud-shaped coffee table with a glossy white top and two cylindrical legs.
Notice
1. Follow the installation instructions. Please confirm all accessories are preset before installation.
2. Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces which are correctly assembled.
3. If you encounter any problems during installation, please contact our customer service.
4. Please unbox the item from the side with an open-label and put a carpet on the floor to avoid scratching it.
Recommended installers: 2
Estimate installation time: 20 minutes
Parts List
| Item No. | Description | Qty |
|---|---|---|
| A | Tabletop | x1 |
| B | Leg | x4 |
| C | Base Plate | x4 |
| Item No. | Description | Qty |
|---|---|---|
| 1 | Screw | x24 |
| 2 | Allen Wrench | x1 |
| 3 | Screw | x1 |
Assembly Steps
Step 1
Attach the circular base plates (C) to the top of the cylindrical legs (B). Use screws (1) and the Allen wrench (2) for this step. Two leg assemblies are shown completed in this diagram.
Step 2
Attach the four assembled leg units to the underside of the tabletop (A). Use screws (1) for this attachment. The diagram shows the tabletop upside down with the four leg units being secured.
