Instruction Book

STEP 1

Gather the following parts:

• Part 1: Screws (x8) ?
• Part 2: Tabletop (x1) [tabletop]
• Part 3: Base (x1) [base]

Attach the base (Part 3) to the underside of the tabletop (Part 2) using eight screws (Part 1). Ensure the base is oriented correctly as shown in the diagram.

[Detailed description of the diagram: The X-shaped base is positioned on the underside of the rectangular tabletop. Eight screws are shown being inserted through the mounting points on the base into pre-drilled holes on the tabletop.]

STEP 2

Extend the dining table. Gently pull the sections of the tabletop apart to reveal the extension leaves.

[Detailed description of the diagram: The dining table is shown partially extended. Arrows indicate that the two outer sections of the tabletop should be pulled outwards from the center.]

STEP 3

The dining table is now fully assembled and extended.

[Detailed description of the diagram: The dining table is shown in its fully assembled and extended state, with all sections in place.]