MCombo 6160-7040 Recliner Sofa Assembly Instructions
Thank you for choosing a MCombo product. This instruction is part of the 6160-7040 Recliner and includes important information about installation and use. Please read these instructions carefully before use. This Installation Guide is supplied in different languages, so please select the language you wish to read. Please keep this manual for future reference. If you transfer the product to a third party, be sure to include this instruction guide.
Assembly Guide
Parts Included:
- A: Chair base (1x)
- B: Backrest (1x)
- C: Armrest (2x)
- D: Power supply 1 (1x)
- E: Power supply 2 (1x)
- F: Power cord (1x)
- G: Anti-back-tipping Set (2x)
- H: Remote control 1 (1x)
- I: Remote control 2 (1x)
Step 1: Connect Base and Armrests
Connect the Armrest (C) to the Chair Base (A) as shown in the diagram.
Step 2: Attach Backrest
Attach the Backrest (B) to the Chair Base (A) as shown in the diagram.
Step 3: Connect Cables
Follow these steps to connect the cables:
- Connect cables 1 and 2 of the same color from the backrest and the cushions to one another.
- Connect cable 3 from the backrest to power supply unit D.
- Connect cable 4 from the backrest to remote control E.
- Connect cable 5 from the seat base to the power supply unit F.
- Connect cable 6 from the seat base to remote control H.
- Connect cable 7 from armrest C2 to remote control I.
Note: The motor cable is rolled around the push rod behind the seat base.
Operating Your Recliner
How to Recline Your Chair
Press the designated button on the remote control. The backrest can be electrically adjusted continuously up to 140°.
How to Return to Original Position
1. Press the button to return the legrests to their original position.
2. If you keep the button pressed, the sofa can be tilted forward.
Using the Massage Remote Control
Remote Control Functions:
- ① On/OFF: The massage is activated and paused.
- ② HEAT: The heating function of the rear area is turned on and off.
- ③ MODE: Select from various vibration modes: Continuous vibration, Periodic vibration (strong to weak), Intermittent vibration.
- ④ TIMER: The timer can be set in units of 10/20/30 minutes.
- ⑤ Massage zones: Individual massage zones for back, lumbar, thighs, and legs can be selected.
- ⑥ INTENSITY: Different intensities (low/medium/high) can be set.
Using the Standing-Up Aid Remote Control
To recline (lying position): Move the backrest down, the foot section up.
To sit (sitting position): Ensure the backrest is straight and the foot section is down.
To stand up (stand-up aid): Keep pressing the button to tilt the sofa forwards.
Feedback and Customer Support
MCombo is dedicated to providing premium products. We value customer feedback. If you have any questions or suggestions, please refer to the contact information below.
- ? Phone: +49-(0)21511561192
- ✉️ Email: pfillo.de@gmail.com (Respond within 24 hours)
- ? Address: Pfillo GmbH, Kreuzweg 60, 47809, Krefeld, Germany