Massage Recliner Assembly Instruction
Parts Included
- Chair base (A) x1
- Backrest (B) x1
- Left and right armrest (C) x2
- Power cord (D) x1
- Massage control (E) x1
- Power source (F) x1
- Lift control (G) x1
- Parts (H) x4
- Line (x1)
Assembly Steps
Step 1: Attaching Armrests
Place the chair base (A) on a flat surface. Attach the left and right armrests (C) to the chair base. Ensure the two clips on each armrest are fully inserted into the seat tightly to secure them.
Step 2: Attaching Backrest
Align the backrest (B) with the chair base assembly and secure it in place.
Step 3: Wiring Connections
Connect the wires as follows:
- No. 1 and No. 2 wires connect the backrest and chair base.
- No. 3 wire connects the backrest and the power cord (D).
- No. 4 wire connects the backrest and the remote control (E).
Note: Ensure that two wires of the same color are connected together.
Connect the power source (F) and lift control (G) to their respective ports, ensuring all connections are secure.
Chair Operation
How to Recline
To recline the chair, press the designated button on the remote control. The chair will move to a reclined position.
How to Get Footrest Down and Stand
To lower the footrest and return the chair to a standing position, press the designated button on the remote control. The footrest will retract, and the chair will lift upright.
Remote Control Operation
Using the Remote Control
The remote control allows you to manage the massage and heating functions, as well as chair movements.
TIMER: Set massage duration.
Massage Parts: Select 1-4 massage parts: Back, Lumbar, Thighs, Legs.
INTENSITY: Control massage strength from low to high.
MODE: Choose your preferred massage mode: pulse, press, wave, auto, normal.
HEAT: Turn the lumbar heat function on or off.
ON/OFF: Turn the remote control on or off.
AUTO: Engages an automatic massage sequence.
Tips: To use only the heated function, first turn on both the massage and heated functions. Then, press any of the four massage part buttons (back, lumbar, thigh, leg) twice. This action will turn off the massage function while keeping the heat active.
Final Check and Troubleshooting
Final Check
- Ensure the two clips on each armrest are fully inserted into the seat tightly. Correct insertion ensures proper pressure distribution and prevents armrests from detaching.
- Verify that all wires are connected properly.
Frequently Asked Questions (Q&A)
Q: How to use the heated function only?
A: Activate both the massage and heated functions. Subsequently, press any of the four massage part buttons (back, lumbar, thigh, leg) twice. This will disable the massage function, leaving only the heat operational.
Q: What if my lift chair does not operate at all?
A: Check all electrical cords to ensure they are not crimped or pinched, and verify the plug is undamaged. Confirm the power supply is connected and the green LED power indicator light is illuminated. Make sure all connections are secured, referring to the Assembly Instructions.
Q: What if my lift chair is wobbly?
A: Inspect the chair base to confirm that all rubber seat retainers are intact and not broken. Ensure the armrests are installed tightly, following the guidance in the Assembly Instructions.
Mcombo Customer Service
If you have any questions, suggestions, or if your experience has fallen short of expectations, please contact Mcombo Customer Service. They are committed to ensuring your complete satisfaction.
Phone: 1-323-597-1109
Email: sales@mcombo.com (Responses are typically provided within 24 hours)
Important Note: If the lift recliner continues to malfunction or does not operate correctly, please contact Mcombo Customer Service for assistance. Do not attempt any repairs or adjustments yourself.
