Manuals+

MCombo Lift Recliner Owner's Manual

Model: 6160-7539/7549

Manufacturer: Newacme LLC

Contact: sales@mcombo.com | 1-323-597-1109

I. SAFETY GUIDELINES

1. Mandatory

Read all safety and instructions thoroughly before use. Failure to follow guidelines can result in personal injury or product damage and will void the warranty. Keep this manual for future reference.

2. Danger ☠️

  • To prevent suffocation, keep plastic bags away from children.
  • Do not allow children to play on or near the chair when in use. Serious injury or death could occur if a child is under the chair when it is in motion.
  • Keep cords out of reach of small children and do not use where it may be a trip hazard.
  • Plug directly into a wall outlet. Do not use an extension cord or adapter.
  • Avoid exposing the chair to burning cigarettes, cigars, open flames, and high temperatures.
  • Do not use this product if it is wet, in water, or around any liquid.
  • Always leave the chair in an upright and closed position. Keep hands and feet clear of the mechanism and all moving parts. The footrest must be completely closed before getting in or out of the chair. Only the occupant should operate the chair.
  • Before moving the product, disconnect the electrical plug from the wall outlet and secure the mechanism to prevent unexpected lifting and movement of the chair.
  • Do not attempt to disassemble or repair the actuator or pump; no serviceable parts are inside.
  • Do not allow the electrical cord to be pinched between moving parts or between the frame and the floor. Do not place the cord under carpet or in a location where it could become worn.
  • Do not use pillows, blankets, or other covers between the occupant and chair surface when heat is engaged.
  • Do not attempt to disconnect the power plug by pulling the power cord. Always hold the power plug and pull it out.
  • Closely supervise children and disabled persons using this product.
  • To reduce the risk of head entrapment and other injuries, keep children and pets away from openings and moving parts in and around the furniture.
  • Unplug power cords from the outlet before relocating or troubleshooting.
  • This product has many moving parts; serious injury can occur if not used properly. Keep hands, fingers, and body parts away from the mechanism.
  • To exit the unit safely and prevent a tripping hazard, bring the back upright and close the footrest.
  • Place tables and area rugs at a distance to allow the footrest to fully extend without rubbing or interference.
  • Check the condition of the power supplies, electrical cords, plugs, and connectors often. Keep the power supplies and electrical cords away from heat sources. Never operate the unit with a damaged power supply, electrical cord, plug, or connector.
  • This product is not intended for use as a health care device. Some medications and physical limitations may impair your ability to operate this product safely. Consult your physician if you are taking prescribed or over-the-counter medication, or if you have physical limitations.
  • Do not charge your device into the USB charge ports for over 24 hours.
  • Do not charge any devices over 5V/2A with the USB charge ports.
  • Do not cover the USB charge ports with other heat-dissipating electronic products, as this may prevent heat dissipation and cause overheating or melting.
  • Users of medical devices should contact their health care provider before using this product.
  • Unplug the power cord immediately if you detect strange odors or fumes coming from the chair. Contact MCombo Customer Support.
  • Burns may result from improper use and care of internal heating parts. To avoid risk of burns, do not use pins, do not allow the heating pad area to become wet, and do not remove the upholstery cover.
  • The chair is intended for a single occupant, not exceeding 320 pounds. Do not operate the chair with more than one occupant.
  • If you give this product to someone else, you must include this owner's manual.

3. Warning ⚠️

  • Weight Capacity: 320 lbs.
  • Do not use outdoors. INDOOR USE ONLY.
  • To avoid tip over, do not put your weight against the back of the chair.
  • Do not stand, sit, or place extra weight on the arms, back, or open footrest.
  • Do not use this product if it is damaged. Do not use attachments or substitute parts.
  • Do not use this product if you have poor circulation, are mobility-impaired, or cannot sense heat, except as directed by your health care provider.
  • Do not operate the unit until the back is installed and locked.

II. ASSEMBLY INSTRUCTIONS

Notice

  • Please read these instructions thoroughly before using.
  • Do not plug the power supply in until assembly is complete.
  • Choose a location for the lift chair that is close to an electrical outlet (1 power outlet required).

1. Product Parameters

Specification Description
Model No 6160-7539/7549
Rated Voltage 100~240V
Rated Current 2A
Output Voltage 29V
Overall Dimension 34.6"(W)x41"(D)x45.6"(H)
Reclining Angle 140°
Weight Capacity 320lbs
Package Quantity 3
USB power 43W

2. Part List

Box 1 of 3

  • A Base x 1

Box 2 of 3

  • B Backrest x 1
  • D Lift Remote x 1 (6160-BB-LR1)
  • E Massage Remote x 1 (6160-AA-BM-Blue)
  • F Angle Power Cord x 1 (6160-BB-APC)
  • G Anti-back-tipping x 2
  • H Rack circular gasket x 2 (Spare parts)

Box 3 of 3

  • C1 Right Armrest with USB x 1
  • C2 Left Armrest x 1

3. Assembly Steps

Step 1 - Armrest Assembly

  1. Ensure the armrest which has USB charge port is located on the right of the base.
  2. Slide the left and right armrests into the brackets of the base.
  3. Press each armrest down as far as it will go.

NOTE: Ensure the two connections on each armrest are both inserted into the seat tightly.

[Diagram: Shows armrests connecting to the base with arrows indicating insertion.]

Step 2 - Backrest Assembly

  1. Align the brackets of the backrest at the clips of the seat-back.
  2. Push the brackets into the seat-back tightly. Listen for a "click" sound on each side to ensure the backrest is locked in properly.

ATTENTION: Pull up the backrest to check if it is locked in place.

[Diagram: Shows backrest brackets aligning with seat clips and an arrow indicating upward pull to check lock.]

Step 3 - Lift Connections

  1. Connect the chairs according to the following wiring diagram.
  2. Attach the chair-back to the velcro on the bottom of the chair base.

[Diagram: Illustrates the wiring connections for the lift mechanism, remotes, and power supply, with labels for components.]

Step 4 - Anti-back-tipping Part Assembly

  1. Place the Anti-back-tipping parts (G) near the bottom of the base.
  2. Align the screws with the holes then tighten the wing screws.

[Diagram: Shows placement of anti-back-tipping parts and screws on the chair base.]

Step 5 - Final Check

  1. Make sure both metal brackets on each armrest are mounted on the base. (Ensure armrests are fully seated in both brackets.)
  2. Make sure the backrest inserts are locked to the base. (Pull up the backrest to check if it is locked in place.)
  3. Make sure all wires are connected tightly.
  4. Make sure all wires are not placed on the bottom of the rack and will not be pressed by the frame. (If a wire is pressed by the frame, it may break and stop the chair from working.)
  5. Make sure the anti-tilt fitting screws are tightened.

[Diagram: Illustration of the fully assembled lift recliner.]

III. OPERATING INSTRUCTIONS

1. Operation Precautions

  • Do not use an extension cord.
  • Do not exceed the recommended weight limit.
  • Do not use attachments not recommended by the manufacturer.
  • Do not use outdoors. INDOOR USE ONLY.
  • Stay away the backrest from the wall at least 16.5 inches before using.
  • Use this lift only for its intended use as described in the operating instructions.
  • Keep dry. Do not operate in a wet or moist environment.
  • Keep all cords away from heated surfaces and pinch points.
  • Ensure the hand control is out of the way before sitting in the chair.
  • Always leave the lift chair in an upright and closed position when not in use.
  • Periodically check the hand control and all power cords for visible damage.
  • Do not use the footrest as a seat, or for purposes outside its intended use.
  • Do not lean or apply downward force to the chair-back while in a reclined position.

NOTE: If you discover a problem during setup or positioning, stop and contact MCombo Customer Support immediately. To avoid personal injury and/or product damage, do not plug the unit into the electrical outlet until the problem is corrected, and do not attempt to fix electrical problems yourself.

2. Lift Remote Operation Instruction

The lift remote controls the chair's movement.

  • ^ LIFT (UP): Press and hold the UP button to raise the chair to the full-lift position. Press and hold the UP button to return to the seated position from the reclined position.
  • v LIFT (DOWN): Press and hold the DOWN button to lower the chair to the seated position. Press and hold the DOWN button to raise the footrest and recline the chair back.

[Diagram: Illustration of the lift remote with UP and DOWN buttons clearly labeled.]

3. Massage Remote Operation Instruction

The massage remote controls the massage and heat functions.

  • POWER ?: Turn on/off remote control.
  • HEAT ?: Turn on/off heating function for the lumbar part only.
  • INTENSITY: Control massage function from low to high.
  • BACKREST (UP): Choose one massage mode (pulse, press, wave, auto, normal). You can choose 1-4 massage parts (back, lumbar, thighs, legs) to enjoy.
  • TIMER: Select massage duration (15 mins / 30 mins / 60 mins).

NOTE: Use the heating only by turning off the POWER button and turning on the HEAT button. (Heating function works with vibration separately.)

[Diagram: Illustration of the massage remote with buttons for POWER, HEAT, INTENSITY, MODE, BACKREST, and TIMER.]

IV. CARE AND MAINTENANCE

Notice

  • Do not place your chair in direct sunlight, as sunlight causes fading.
  • Do not smoke cigarettes while sitting in or using your chair.
  • Avoid extreme changes in temperature by arranging the chair away from radiators, heat, and air vents.
  • Do not use solvent-type cleaners to spot clean.
  • Do not saturate fabric.
  • Please be careful that pet scratches may cause fabric or leather to break.

1. Fabric Care

  • Inspect the fabric on a regular basis for any pulls, tears, or gaps.
  • Frequent vacuuming or light brushing with a nonmetallic, stiff bristle brush to remove dust and grime is recommended.
  • When liquid spills onto the fabric, please immediately wipe off liquid spills with a dry or lightly dampened clean white cloth, sponge, or paper towel.

2. Faux Leather Care

  • Wipe leather down regularly with a clean, dry microfiber cloth.
  • For more stubborn dust, dampen the cloth with distilled water. Make sure that the cloth is not soaking wet. Never let water soak into leather.
  • Always be sure to use a soft cloth and never use an abrasive brush or scrubber, as this can scratch and damage the leather.

3. Electronics Care

  • Inspect all wiring harnesses to make sure they are not damaged or stuck under the chair.
  • Keep all electronics free from moisture and temperature extremes.
  • Check electrical components frequently for signs of corrosion and replace as necessary.
  • Contact MCombo Customer Support if damage is present; do not fix it yourself.

4. Disposal & Recycling

Your power recliner sofa must be disposed of according to applicable local and national statutory disposal regulations. Contact your local waste disposal agency for information on proper disposal of recliner sofa packaging, metal/wood frame components, fabric, and electronic components.

V. TROUBLESHOOTING

The following troubleshooting FAQs should summarize what you need to know about your power recliner sofa. If at any time you do not feel comfortable performing the troubleshooting steps listed in this manual, please contact MCombo Customer Support for service.

Questions Answers
What if my lift chair does not operate at all?
  • Make sure all the connections at the bottom of the chair are secured; refer to the Assembly Instructions.
  • Make sure the GREEN light ? of the lift remote is on.
  • Check if the GREEN light ? on the power adapter is on.
  • Check all the electrical cords are not crimped or pinched.
What if the massage and heat do not work?
  • Make sure the light of the massage remote is on.
  • Check whether the USB light is on to determine if there is a problem with the connecting box.
  • Check all the electrical cords are not crimped or pinched.
  • Check if the GREEN light ? of the power adapter is on.
What if the USB charge ports do not work?
  • Check if the GREEN light ? at the power adapter is on.
  • Make sure the USB cable coming out of the right armrest is properly connected to the connecting box behind the bottom of the chair; refer to Step 3 Lift Connection in the "Assembly Instructions".
What if my lift chair is wobbly?
  • Check the base of the chair to make sure all the rubber seat retainers are not broken.
  • Make sure the armrests are installed tightly; refer to the Assembly Instructions.
What if the armrest falls apart from seat?
  • Ensure the two connections on each armrest are all inserted onto the base tightly.
  • Check the brackets of the armrest and base to ensure there is no defects.
What if my lift chair makes a clicking noise?
  • Check the lift motor and make sure the end of the lift motor is at the center of the pivot point.
  • Make sure the weight capacity of 320 lbs has not been exceeded.
What if my lift chair tilted to one side?
  • Check the brackets of the backrest are installed into the seat tightly.
  • Make sure the rack of the lift chair is in a good condition without any distortion.
  • Use the lift chair on a flat carpet, not a smooth floor.
What if the remote is very hot?
  • Check all wiring harnesses to make sure they are not damaged or frayed.
  • If all cords are in good condition, please unplug the remote and cool it for a while before using it.
  • If there is a burning smell, unplug the remote and contact MCombo support for replacement.

NOTE: If the lift recliner still does not operate properly, please contact MCombo Customer Support for help and never attempt to make any repairs or adjustments yourself.

Lift Motor Replacement

NOTE: 1. Take an original bottom picture for reference before disassembling. 2. The disassembled small parts need to be put away to prevent falling into the rack.

Step 1 - Turn the Chair to the Left

First, turn the chair to the left, with the right armrest upward. Be careful not to break the wire of the USB charge ports.

[Diagram: Shows how to turn the chair to its side for motor access.]

Step 2 - Remove Bolts

  1. Identify the original position of the paper clip.
  2. Twist the paper clip.
  3. Pull out the paper clip.
  4. Pull out the bolt.

[Diagrams: Illustrate the process of removing bolts and paper clips from the lift motor assembly.]

Step 3 - Remove Old Lift Motor

Repeat "Step 2" with the other end of the lift motor.

[Diagram: Shows the lift motor being detached from its mounting points.]

Step 4 - Replace the New Lift Motor

Replace the old lift motor with the new lift motor.

NOTE: Please note that the motor of the lift motor is facing the ground. Be careful not to install it backwards, otherwise the lift motor will break.

[Diagram: Shows the new lift motor being installed.]

Step 5 - Install Bolts

Insert bolts and paper clips at both ends of the lift motor.

[Diagrams: Illustrate inserting bolts and paper clips to secure the new lift motor.]

Step 6 - Final Check

Check & Confirm:

  1. Make sure bolts and paper clips are fully inserted.
  2. Make sure the lift motor is installed in the correct direction.
  3. Make sure the wires are not crushed by the seat frame.

VI. DISASSEMBLY INSTRUCTIONS

Notice

  • Ensure the chair is in the seated position and its footrest is returned to the original position.
  • Please unplug the power cord before disassembling.
  • Please refer to the installation steps from back to front and disassemble the chair in reverse order.

Step 1 - Disconnect all Connections

Please disconnect all connections on the chair base and backrest before disassembling.

Step 2 - Disassemble Backrest

  1. Push the metal ears of the backrest inserts outward (Refer to arrow direction).
  2. After unlocking the metal lugs on both sides of the backrest, hold the bottom part of the backrest marked in the picture below and pull it vertically upward.

ATTENTION: After unlocking the metal tabs on both sides of the backrest, pull the backrest upward.

[Diagram: Shows how to push metal ears outward and pull the backrest up.]

Step 3 - Disassemble Armrests

NOTE: 1. Need to remove the backrest first. 2. It is best to remove the armrest by two people. 3. When lifting the armrest, be sure to hold the bottom of the armrest to avoid damaging the armrest bag and cup holder.

  1. Use your knees to find a support point on the seat and press on the base with your own strength.
  2. Hold the two marked positions at the bottom of the armrest and lift the armrest vertically upward. (Refer to arrow direction and the circular marking area.)

ATTENTION: Shake the armrest slightly to loosen the brackets, make it easier to detach from the base.

[Diagram: Shows how to support the seat and lift the armrest.]

VII. WARRANTY

Notice

  • For products beyond the limited manufacturer warranty period and scope, Mcombo can also provide replacement service, but a basic charge will be charged according to the circumstances.
  • The warranty only applies to Mcombo products and does not include any accessories or enhancements.
  • Warranties are only valid in the 48 contiguous United States and are contingent upon the consumer operating the product according to the corresponding instruction manual.
Component Warranty Period
Reclining Mechanism 1 Year
Upholstery Material 1 Year
Metal/ Wood Chair Frame 1 Year
Electronic Parts 1 Year

CONSUMER WARRANTY LIMITATIONS AND EXCLUSIONS

  • All warranties begin on the date of delivery.
  • All warranties are to the original purchaser from MCOMBO® ONLY.
  • MCOMBO® will replace defective parts or send replacement product provided that the warranty parts have not been subjected to misuse, abuse, or improper service by the consumer, for example, damaged wire arising in consequence of negligence or improper operation.
  • Exclusions also include components with damage caused by: Contamination, Abuse, misuse, accident, or negligence, Commercial use, or use other than normal, Improper operation, maintenance, or storage.

NOTE: MCOMBO® will pay standard shipping rates on all warranted parts for the first year. Mcombo can also sell you replacement parts at a discount price when your product is out of warranty.

VIII. RETURN/ REPLACEMENT POLICY

Notice

Why don't we recommend returning the item by yourself?

  • Huge cost - UPS/FedEx oversize fee.
  • Need you to take the box to a UPS/FedEx facility.

Return/ Replacement Policy

You have 30 days from the date of purchase to return any item purchased from Mcombo's store. Please securely pack the item in its original packaging, including any accessories or manuals that came with the product. To initiate a return, please contact the Mcombo customer service team at sales@mcombo.com or 323-597-1109 for assistance.

Return Conditions

Mcombo accepts the return of items that are in new, unused condition, with original tags attached and all original packaging and other components included. Refunds will be issued in the original form of payment for the price of the item, including taxes.

NOTE:

  • Please keep the original packaging in case the product needs to be returned. If the original packaging is not available, the newly found packaging needs to meet the following size standard: UPS/FedEx packaging size standard: (width+ height) * 2 + length < 128 inch.
  • Please disassemble the product before you return it, otherwise there will be a huge cost for oversized items, and it could even exceed your order amount.
  • Please do not purchase a return label for a damaged/defective product yourself.
  • If you have any problem to return the product, please contact Mcombo immediately; they will do their best to help you with a reasonable solution.

IX. MCOMBO CUSTOMER SUPPORT

If for any reason, Mcombo has fallen short of your expectations, or if you have any questions and suggestions, please refer to the following contact information. Mcombo will do its best to work with you to ensure you are entirely satisfied.

  • Email: sales@mcombo.com (Respond within 24 hours)
  • Phone: 1-323-597-1109 (8:00 a.m. -- 4:00 p.m. Monday--Friday TIME ZONE: PST)

Locations:

  • DE: 2411 Bear Corbitt Rd STE 1, New Castle, DE, 19720
  • CA: 2808 Vail Ave, Commerce, CA, 90040
  • TN: 3980 PREMIER AVE, MEMPHIS, TN, 38118
Models: 6160-7539, 7549, 7549 Lift Chair, Lift Chair, Chair

PDF preview unavailable. Download the PDF instead.

Manual Lift Chair 6160-7539 7549 ?v=1740972952 Adobe Illustrator 24.0 (Windows) iLovePDF

Related Documents

Preview MCombo Lift Recliner Owner's Manual: Assembly, Operation, and Care Guide
Comprehensive owner's manual for the MCombo Lift Recliner, detailing safety guidelines, assembly instructions, operating procedures for lift and massage functions, care and maintenance tips, troubleshooting common issues, lift motor replacement, disassembly, warranty information, and return policy. Includes model numbers 6160-7893, 6160-7890, and 6160-7896.
Preview MCombo Lift Recliner Owner's Manual (Large-Regular) - Model 6160-7426
Comprehensive owner's manual for the MCombo Lift Recliner (Large-Regular), model 6160-7426. Includes safety guidelines, assembly instructions, operating procedures, care and maintenance, troubleshooting, warranty information, and return policy.
Preview MCombo Lift Recliner Owner's Manual and Assembly Guide
Comprehensive owner's manual for the MCombo Lift Recliner, covering safety guidelines, assembly instructions, operating procedures, care and maintenance, troubleshooting, warranty, and return policy. Includes detailed diagrams and instructions for model numbers 6160-7631, 6160-7634, and 6160-7888.
Preview Mcombo Power Lift Recliner Owner's Manual - Model 6160-7533
This owner's manual provides comprehensive instructions for the Mcombo Power Lift Recliner, Model 6160-7533. It covers essential safety guidelines, detailed assembly and disassembly procedures, operating instructions, troubleshooting tips, warranty information, care and maintenance advice, and customer support contacts.
Preview MCombo 6160-7286 Lift Recliner Owner's Manual and Assembly Guide
Detailed owner's manual for the MCombo 6160-7286 lift recliner, covering assembly, operation, safety, maintenance, troubleshooting, warranty, and return policies.
Preview MCombo Lift Recliner Owner's Manual: Assembly, Operation, and Care
Comprehensive owner's manual for the MCombo Lift Recliner (Models 6160-7893/7679/7680), covering safety guidelines, assembly instructions, operating procedures, maintenance, troubleshooting, warranty, and return policy.
Preview MCombo Lift Recliner (Medium-Wide) Owner's Manual
Comprehensive owner's manual for the MCombo Lift Recliner (Medium-Wide) model 6160-R7605, covering safety guidelines, assembly, operation, care, maintenance, and troubleshooting.
Preview Mcombo Power Lift Recliner Manual: Assembly, Operation, and Safety
Comprehensive guide for Mcombo power lift recliners, covering safety guidelines, assembly instructions, operation, troubleshooting, warranty, and care. Includes detailed steps and important precautions.