IKEA STORKLINTA 4-Drawer Chest Assembly Instructions

Safety Warnings

Furniture Tipover Hazard

⚠️ WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:

ALWAYS install anti-tip device provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
NEVER open more than one drawer at a time.
DO NOT defeat or remove the drawer interlock system; it is an important stability and safety system.
Place heaviest items in the lowest drawers.

Tools and Hardware

Tools Required:

Screwdrivers (Phillips and flathead)
Hammer
Drill

Hardware and Drill Bit Sizes:

Drill Bit: Ø 5/16" (8 mm)
Drill Bit: Ø 1/8" (3 mm)
Various screws, dowels, cam locks, and wall anchors are provided.

Assembly Steps

Step 1: Prepare Base Panels

Attach mounting brackets (106989) to the base panels using screws (100823) and (109049). Ensure correct orientation.

Diagram shows an L-bracket and screws being attached to a panel.

Step 2: Assemble Drawer Slides and Supports

Attach drawer slide components (e.g., 118331, 119250, 119252) to the side panels using screws (105248) and dowels (101345). Assemble the main frame supports using parts like 10094763, 10094727, 10093081, 10093082, 10101849, 158568. A long metal support bar (10076617) is also shown.

Step 3: Attach Cam Locks and Drawer Runners

Insert 32x cam lock fittings (120076) into the designated holes. Attach 16x screw fittings (118331) and 24x screws (146114). Attach 16x dowels (145718) and 16x dowels (101345). The diagram shows two sets of drawer runners labeled 'CL' (Left) and 'CR' (Right), with 4x of each.

Step 4: Assemble Base Structure

Align and connect the base panels using the provided cam locks and screws. Insert 24x screw (146114) into the cam lock system (10102026). The diagram shows a hand turning a cam lock to secure the connection.

Step 5: Connect Side Panels

Attach the side panels to the base structure. Use the cam lock system (10102026) and screws (146114). The diagram shows a hand rotating cam locks to secure the side panels.

Step 6: Add Internal Supports

Insert 4x screw fittings (118331) into the designated holes on the base structure.

Step 7: Secure Panels

Attach additional panels using 2x screws (105248). The diagram shows a screw being inserted and tightened.

Step 8: Attach Mounting Bracket

Attach the L-shaped mounting bracket (106989) to the frame using screws (100823) and (109049).

Step 9: Insert Dowels

Insert 4x dowels (101345) into the designated holes on a panel.

Step 10: Attach Back Panel

Slide the back panel into the grooves of the frame. Secure it with screws.

Step 11: Secure Back Panel with Cam Locks

Use 2x cam lock fittings (119250, 119252) to secure the back panel to the frame. Rotate the cam locks to tighten.

Step 12: Attach Top Support Bar

Attach the metal support bar (10076617) to the top of the frame using screws.

Step 13: Attach Bottom Support Bar

Attach the bottom support bar using 2x screws (102553) and 2x screws (105248).

Step 14: Attach Drawer Front Supports

Attach horizontal supports to the front of the frame using 2x screws (105248).

Step 15: Attach Drawer Handles

Attach the drawer handles (158568) to the drawer fronts using screws (10101849).

Step 16: Insert Dowels

Insert 4x dowels (101345) into the designated holes on a panel.

Step 17: Secure Panels with Screws

Attach panels using 4x screw fittings (118331).

Step 18: Attach Back Panel

Slide the back panel into the frame.

Step 19: Secure Back Panel with Cam Locks

Use 4x cam lock fittings (119250, 119252) to secure the back panel. Rotate the cam locks to tighten.

Step 20: Assemble Drawer Sides

Attach drawer side panels to drawer base panels using dowels (101345) and screws. The diagram shows 6x dowels (101345) being used.

Step 21: Attach Drawer Fronts

The diagram shows a drawer front being attached, with a warning symbol indicating incorrect assembly if not aligned properly.

Step 22: Attach Drawer Front

The diagram shows a drawer front being attached to the drawer box, with a warning symbol for incorrect alignment.

Step 23: Attach Drawer Fronts

Attach the drawer fronts to the assembled drawer boxes using screws (10094727) and (10094763).

Step 24: Attach Drawer Slides to Drawers

Attach drawer slide components (10093081, 10093082) to the sides of the assembled drawers using screws.

Step 25: Attach Anti-Tip Device Bracket

Attach the anti-tip device bracket (part of the kit shown on page 4) to the top rear of the furniture using screws.

Step 26: Finalize Drawer Slide Attachment

Secure the drawer slide components with screws.

Step 27: Insert Drawer Unit

The diagram shows the main unit being pushed into place.

Step 28: Attach Anti-Tip Strap

Attach the anti-tip strap (109572) to the furniture using the provided bracket (10102070).

Step 29: Secure Anti-Tip Strap to Wall

Secure the other end of the anti-tip strap to the wall using appropriate hardware.

Step 30: Anti-Tip Device Installation Detail

Detailed view of attaching the anti-tip device bracket (10102070) and securing it.

Step 31: Anti-Tip Strap Attachment Detail

Detailed view of attaching the anti-tip strap (109572) to the bracket (10102070).

Step 32: Final Strap Securing

Final step of securing the anti-tip strap.

Step 33: Drawer Assembly - Part 1

Assemble drawer components using screws (118331).

Step 34: Drawer Assembly - Part 2

Insert dowels (101345) into drawer panels.

Step 35: Drawer Assembly - Part 3

Attach drawer sides to the drawer base.

Step 36: Drawer Assembly - Part 4

Attach drawer side panels using cam locks (120076).

Step 37: Attach Drawer Back Panel

Attach the back panel to the drawer.

Step 38: Attach Drawer Support

Attach a support bar (10040242) to the drawer.

Step 39: Attach Drawer Top Panel

Place and secure the top panel of the drawer.

Step 40: Attach Drawer Runners

Attach drawer runners (145718) to the drawer sides using cam locks (120076).

Step 41: Insert Drawers

Insert the assembled drawers into the chest frame. Secure drawer slides with screws (146114).

Step 42: Final Drawer Insertion

The diagram shows a drawer being inserted and a warning about incorrect stacking of drawer parts.

Step 43: Final Drawer Insertion

The diagram shows a drawer being inserted into the chest.

Wall Mounting Instructions

Secure Furniture to Wall

The supplied screws and plugs can be used with most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If you are uncertain, seek professional advice.

Diagram A (Solid Wall): Shows mounting with screw and plug. Requires drill bit Ø 5/16" (8 mm). Drill depth approx. 2 3/4" (70 mm).

Diagram B (Hollow Wall): Shows mounting with screw and plug. Requires drill bit Ø 5/16" (8 mm). Drill depth approx. 1 1/4" (30 mm).

Diagram C (Solid Wood): Shows mounting with screw only. Requires drill bit Ø 1/8" (3 mm). Drill depth approx. 1 1/4" (30 mm).

	STORKLINTA 3-Drawer Chest Assembly Instructions Comprehensive assembly guide for the IKEA STORKLINTA 3-drawer chest. This document provides step-by-step instructions, safety warnings, and a detailed parts list to help you build your furniture securely and efficiently.
	STORKLINTA 5-Drawer Chest Assembly Instructions Comprehensive assembly guide for the IKEA STORKLINTA 5-drawer chest, featuring step-by-step instructions, safety warnings, and hardware details. Includes anti-tip device installation.
	STORKLINTA 3-Drawer Chest Assembly Instructions \| IKEA Step-by-step assembly guide for the IKEA STORKLINTA 3-drawer chest. Includes safety warnings, parts list, and detailed instructions for building your furniture.
	STORKLINTA 4-Drawer Chest Assembly Instructions Assembly instructions for the STORKLINTA 4-drawer chest by IKEA. This guide details the secure attachment of components.
	STORKLINTA 5-Drawer Chest Assembly Instructions \| IKEA Step-by-step guide to assembling the IKEA STORKLINTA 5-drawer chest. Includes safety warnings, parts list, and detailed instructions for safe installation and use.
	STORKLINTA 6-Drawer Chest Assembly Instructions Comprehensive assembly instructions for the IKEA STORKLINTA 6-drawer chest, including essential safety warnings regarding furniture tipover and detailed step-by-step guidance for building and securing the furniture.
	STORKLINTA Chest of 6 Drawers Assembly Instructions Step-by-step assembly instructions for the IKEA STORKLINTA chest of 6 drawers. Includes safety warnings, parts list, and detailed assembly steps for building and securing the furniture.
	STORKLINTA 6-Drawer Chest Assembly Instructions Comprehensive guide for assembling the IKEA STORKLINTA 6-drawer chest, including safety warnings, parts list, and step-by-step instructions for secure furniture setup and wall anchoring.