STORKLINTA

Safety First: Preventing Furniture Tip-Over

⚠️ WARNING: Children have died from furniture tip-over. To reduce the risk of furniture tipover:

• [anti-tip device] Always install the provided anti-tip device.
• [no TV on product] Never place a TV on this product.
• [no climbing] Never allow children to stand, climb, or hang on any drawers, doors, or shelves.
• [one drawer at a time] Never open more than one drawer at a time.
• [interlock system] Do not defeat or remove the drawer interlock system; it is an important stability and safety system.
• [heavy items low] Place heaviest items in the lowest drawers.

Parts and Tools

Tools Required:

• Screwdriver (Phillips head)
• Screwdriver (Flathead)
• Hammer
• Drill
• Drill bits: Ø 5/16" (8 mm), Ø 1/8" (3 mm)

Hardware and Components:

The following parts are included for assembly and wall mounting:

• 118331 (Cam lock screw, 10x + 36x + 6x = 52x total)
• 110126 (Dowel, 8x)
• 119252 (Drawer runner part, 16x)
• 119250 (Drawer runner part, 16x)
• 101345 (Dowel, 2x + 24x + 4x + 2x = 32x total)
• 102553 (Cam lock, 6x)
• 105248 (Screw, 30x + 2x + 2x = 34x total)
• 146114 (Dowel, 4x + 24x = 28x total)
• 10076617 (Bracket, 1x)
• 155370 (Bracket, 1x)
• 144574 (Drawer part, 2x)
• 144575 (Drawer part, 2x)
• 10094763 (Drawer part, 4x)
• 10094727 (Drawer part, 4x)
• 10093081 (Drawer part, 2x)
• 10093082 (Drawer part, 2x)
• 10101849 (Bracket, 2x)
• 158568 (Bracket, 2x)
• 120076 (Drawer runner part, 48x + 4x = 52x total)
• 10040242 (Screw, 24x)
• 145718 (Screw, 24x)
• 151931 (Drawer runner part, 4x + 2x = 6x total)
• 10102026 (Cam lock, 6x)
• 109572 (Wall Screw, 2x)
• 10087223 (Wall Plug, 2x)
• 109049 (Washer, 1x)
• 100823 (Plastic Piece, 2x)
• 10102070 (Bracket, 1x)
• 106989 (Bracket, 1x)

Assembly Steps

Step 1: Assemble Base Frame

Connect the base panel to the side panels. Insert dowels (146114) and cam locks (10102026) into the pre-drilled holes. Tighten the cam locks using a screwdriver to secure the panels.

Step 2: Attach Drawer Runners (Unit)

Attach the drawer runner components (CL - 151931, 4x; CR - 10102026, 6x) to the inside of the side panels using screws (146114, 4x for CL; 10102026, 6x for CR).

Step 3: Attach Side Panels

Attach the remaining side panels to the base frame using screws (118331, 4x).

Step 4: Attach Panel

Attach another panel using parts (105248, 2x).

Step 5: Attach Top/Bottom Panel

Attach a panel using parts (101345, 4x).

Step 6: Attach Side Panel

Attach a side panel to the frame.

Step 7: Attach Side Panel

Attach another side panel to the frame. Use parts 119252, 119250, 120076, 110126 as shown.

Step 8: Form Main Frame

Continue assembling the main frame of the unit.

Step 9: Attach Side Panel

Attach another side panel using parts 119252, 119250, 120076, 110126.

Step 10: Attach Back Support Rail

Attach a back support rail to the unit.

Step 11: Attach Rail to Panel

Attach a rail to a panel using parts 102553, 105248, 10076617.

Step 12: Attach Brackets to Frame

Attach brackets (158568, 2x) to the frame using parts (105248, 2x).

Step 13: Attach Brackets

Attach brackets (10101849, 2x) using parts (105248, 2x).

Step 14: Attach Panel

Attach a panel using parts (101345, 4x).

Step 15: Insert Panel

Insert a panel into the unit.

Step 16: Insert Panel

Insert another panel into the unit.

Step 17: Attach Panel

Attach a panel using parts 10094763 (2x) and 10094727 (2x).

Step 18: Attach Panel

Attach a panel using parts (101345, 2x).

Step 19: Insert Back Panel

Insert the large back panel into the unit.

Step 20: Attach Side Panel

Attach a side panel using parts (101345, 4x).

Step 21: Attach Panel

Attach a panel using parts (118331, 6x).

Step 22: Attach Panel

Attach a panel using parts (101345, 2x).

Step 23: Attach Drawer Runners (Drawer)

Attach drawer runner components (CL - 151931, 2x) to the drawer sides using parts (10102042, 2x).

Step 24: Attach Drawer Runners (Drawer)

Attach drawer runner components (CR - 151931, 2x) to the drawer sides.

Step 25: Attach Drawer Back Panel

Attach the drawer back panel.

Step 26: Attach Drawer Runners (Drawer)

Attach drawer runner components to the drawer sides using parts 110126, 119252, 119250, 120076.

Step 27: Insert Drawer Sides

Insert the assembled drawer sides into the main unit.

Step 28: Attach Drawer Runners (Unit)

Attach drawer runner components to the main unit using parts 119252, 119250, 120076.

Step 29: Attach Drawer Runners (Unit)

Attach drawer runner components to the main unit using parts 10093081, 10093082.

Step 30: Insert Drawer Runners

Insert the drawer runners into their positions within the unit.

Step 31: Attach Drawer Supports

Attach drawer supports using parts 144575 and 144574.

Step 32: Attach Anti-Tip Bracket (Unit)

Attach the anti-tip bracket to the top of the unit using parts 100823, 109049, 106989.

Step 33: Secure Anti-Tip Bracket

Insert and secure the components of the anti-tip bracket as shown.

Step 34: Attach Anti-Tip Bracket (Wall)

Secure the anti-tip bracket to the wall using screws (109572).

Step 35: Completed Anti-Tip Installation

The unit is now secured to the wall.

Step 36: Wall Mounting Guide

The supplied screws (109572) and plugs (10087223) can be used with most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If uncertain, seek professional advice.

Wall Type A (Solid Wall): Drill a hole with Ø 5/16" (8 mm). Insert wall plug (10087223). Insert screw (109572) through bracket and into plug. Use a 2 3/4" (70 mm) screw if needed.

Wall Type B (Hollow Wall): Drill a hole with Ø 5/16" (8 mm). Insert wall plug (10087223). Insert screw (109572) through bracket and into plug. Use a ≈1 1/4" (≈ 30 mm) screw.

Wall Type C (Solid Wood): Drill a hole with Ø 1/8" (3 mm). Insert screw (109572) directly into the wood without a plug. Use a ≈1 1/4" (≈ 30 mm) screw.

Steps 37-39: Final Anti-Tip Securing

Follow the diagrams to securely attach the anti-tip device to the wall and the unit, ensuring stability. This involves attaching brackets (10102070, 109572) to the unit and then to the wall.

Steps 40-41: Drawer Assembly

Assemble the drawer bases and attach drawer sides using parts 118331 (4x) and 101345 (4x).

Steps 42-43: Attach Drawer Front

Attach the drawer front panels to the assembled drawer sides.

Steps 44-45: Assemble Drawer Box

Assemble the drawer box structure using parts 120076 (4x) and 101345 (2x), then attach the back panel.

Step 46: Attach Drawer Runners (Drawer)

Attach drawer runners to the drawer sides using part 10040242 (1x).

Step 47: Attach Drawer Sides

Attach drawer sides to the drawer base.

Step 48: Attach Drawer Front

Attach the drawer front panel using parts 145718 and 120076.

Step 49: Attach Drawer Runners (Drawer)

Attach drawer runners to the drawer sides using part 146114 (6x).

Step 50: Insert Drawers

⚠️ Insert the assembled drawers into the unit. Ensure drawers are not overloaded and are placed correctly. Avoid stacking drawers incorrectly.

Step 51: Final Drawer Insertion

Complete the insertion of all drawers into the unit.