DJI Power 2000 User Manual

This document is copyrighted by DJI with all rights reserved. Only refer to this document and the content thereof as instructions to operate DJI products.

In the event of divergence among different versions, the English version shall prevail.

Using this Manual

Legend

• Important
• Hints and Tips
• Reference

Read Before Use

DJI™ provides you with tutorial videos and the following documents:

1. Safety Guidelines
2. Quick Start Guide
3. User Manual

It is recommended to watch all the tutorial videos and read the Safety Guidelines before using for the first time. Make sure to review the Quick Start Guide before using for the first time and refer to this User Manual for more information.

Video Tutorials

Go to the address below or scan the QR code to watch the tutorial videos, which demonstrate how to use the product safely:

https://www.dji.com/power-2000/video

Download DJI Assistant 2

Download DJI ASSISTANT™ 2 (Power Series) at:

https://www.dji.com/downloads/softwares/dji-assistant-2-power-series

1 Product Profile

1.1 DJI Power 2000

The DJI Power 2000 features the following components:

• 1. Power Button
• 2. Display Screen
• 3. AC Output Ports
• 4. AC Button
• 5. AC Input Port
• 6. Recharge Mode Switch
• 7. SDC Ports
• 8. USB-A Ports
• 9. USB-C Ports
• 10. Vents

[1] The illustrations in the user manual may differ from the actual product, depending on the country or region. Please refer to the actual product.

1.2 Display Screen

The display screen provides the following information:

• 1. Remaining Battery Level
• 2. Time: Displays the remaining usage time when charging external devices, or the remaining time to fully recharge the power station.
• 3. Battery Level Bar: Indicates the battery level.
• 4. System Warnings
  • ERRBB: Error code.
  • [Temperature Icon]: Temperature error. The icon will be solid if the temperature is too high or too low. Wait for the temperature to return to normal.
  • OVERLOAD: Overload warning.
• 5. Fast Recharge mode
• 6. Standard Recharge mode
• 7. Wi-Fi Connection Status: A solid icon indicates a successful Wi-Fi connection. A blinking icon indicates that the Wi-Fi is not connected or unavailable.
• 8. USB-A Port
• 9. USB-C Port
• 10. AC output frequency: When the AC frequency differs from the power grid, only recharging is supported. Error codes (ERR13 or ERR14) will be displayed. Press and hold the AC button for more than 10 seconds to switch the frequency.
• 11. SDC Port: Indicates recharging or charging external devices. Displays voltage (V) and aircraft battery level (%).
• 12. Input Power
• 13. Uninterruptible Power Supply (UPS)
• 14. Output Power

Check the warning prompts in DJI Home App or visit https://s.dji.com/DJI-Power for warning details and troubleshooting.

2 Basic Usage

2.1 Powering on/off

Power on/off: Press and hold the power button for at least two seconds.

Turn on/off the display screen: When the power station is powered on, press the power button once.

2.2 Connecting to the DJI Home App

1. Scan the QR code to download DJI Home App.
2. Enable Bluetooth and Wi-Fi on your phone, run DJI Home App and follow the instructions to connect the device.
• To check the Android and iOS operating system versions supported by the app, visit https://www.dji.com/downloads/djiapp/dji-home.
• The interface and functions of the app may vary as the software version is updated.

2.3 AC Recharging

1. Open the port cover and connect the AC input port to an AC power outlet.
2. Toggle the recharge mode switch to select the recharge mode.

• Fast Recharge mode: Higher recharge power, suitable for daily recharge.
• Standard Recharge mode: Lower recharge power and operation noise, suitable for recharging at night.
• Super Recharging: Can be enabled in DJI Home App for higher recharge power.

Important Notes for Recharging:

• Use the original AC power cable and avoid bending or pressing it.
• Ensure good ventilation during recharging. Do not place the device in high-temperature or confined spaces.
• Disconnect the AC power outlet when charging is complete.
• Standard Recharge mode is recommended for extended battery cell life.
• The power station may automatically switch to Standard Recharge mode after five consecutive Fast Recharge cycles for battery maintenance.
• In Fast Recharge mode, the temperature error icon may blink slowly, and recharge power may be lowered to ensure battery cell life and safety.

2.4 AC Output

Connect the external device to an AC output port and press the AC button for AC power supply. The power station will beep once and the AC button will blink slowly.

AC output will automatically shut down if no AC device is powered for more than 30 minutes. When AC output is disabled, the power station will automatically shut down if it has no output or input for more than 60 minutes. AC Timeout and Device Timeout can be modified in DJI Home App.

Press and hold the AC button for a continuous AC power supply when connecting to devices that operate intermittently, such as a refrigerator. The power station will beep once and the AC button will show a solid light.

Note: The internal electronic components have a waterproof coating. A faint smell may be present when using a large amount of power, which will dissipate naturally with daily use.

2.5 USB Output

Connect the external device to the USB-A or USB-C ports for power supply.

3 Accessories

Watch the tutorial videos or read the accessory manuals to learn about product usage.

Note: Unless otherwise specified, accessories need to be purchased separately.

3.1 SDC Output

The power station can be used with SDC cables to charge different devices via the SDC port.

• 1. Matrice 30 Series Fast Charge Cable
• 2. Air 3 Series Fast Charge Cable
• 3. Mavic 3 Series Fast Charge Cable
• 4. Inspire 3 Fast Charge Cable
• 5. Matrice 4 Series Fast Charge Cable
• 6. SDC to XT60 Power Cable (12 V)
• 7. SDC to Car Charger Plug Power Cable (12 V)

* Default output voltage: 13.6 V. Max output current: 10 A.

• Make sure the external device is within the output specifications of the cable.
• DO NOT directly connect to a lithium battery with an XT60 port using the SDC to XT60 power cable. Connect the power station to a balanced charger first.

3.2 Expanding Capacity

DJI Power Expansion Battery 2000 can be connected to the power station to expand the battery capacity.

To charge the expansion battery, connect it to the power station and charge the power station.

3.3 Car Scenario

This scenario illustrates charging using a car's power outlet or a car charger.

• 1. Car Power Outlet to SDC Power Adapter
• 2. 1kW Super Fast Car Charger
• 3. 1.8kW Solar/Car Super Fast Charger
• 4. 1.8kW Super Fast Charger 45A Car Charging Cable

Important Notes for Car Charging:

• Make sure the connected car power supply is within the specifications of the accessory. Otherwise, it may cause abnormal performance or damage to the power station.
• Make sure the power adapter is securely connected to the car power port and the car engine is started before recharging.

3.4 Solar Power Scenario

This section details solar charging options:

Car Power Outlet to SDC Power Adapter

Connects a car power outlet to the SDC port for charging (Max 100W).

Solar Panel Adapter Module (MPPT)

Connects solar panels via MC4 ports using an MC4 to XT60 Cable (Max 400W).

1.8kW Solar/Car Super Fast Charger

This charger can be used for both solar and car charging.

• 1. 1.8kW Solar/Car Super Fast Charger
• 2. 1.8kW Super Fast Charger XT90 to MC4 Adapter Cable

Important Notes for Solar Charging:

• Use officially authorized solar panels. Do not mix different types of solar panels. Ensure connected solar panels are within adapter input specifications.
• Up to three solar panels can be connected in parallel to the adapter module.
• The Car Power Outlet to SDC Power Cable allows connection of one solar panel.

3.5 Solar Power + RV Scenario

This scenario describes integrating the power station with an RV and solar power.

• 1. 1.8 kW Solar/Car Super Fast Charger
• 2. 1.8kW Super Fast Charger 45A Car Charging Cable

When using multiple recharging methods simultaneously, solar recharging takes priority by default. Recharging sequence can be adjusted in DJI Home App by enabling Custom Backup Reserve Level in Energy Management.

4 Uninterruptible Power Supply (UPS)

Connect the power station to an AC power outlet and an external device (e.g., a computer). Press the AC button once; UPS is enabled if the [UPS Icon] appears on the display screen.

When the power grid is normal, the AC power outlet powers both the power station and the connected device.

In case of a sudden power outage, the power station automatically switches to power supply status, ensuring the connected device remains in normal operation.

• The power station supports basic UPS functionality and does not support 0ms switching. DO NOT connect to devices requiring 0ms UPS, such as medical equipment.
• This function may be unavailable in some regions. Refer to local laws and regulations.
• Due to local restrictions, the actual output power may be lowered in UPS mode.

5 Setting Up an Energy Optimization Plan

The Energy Optimization function in DJI Home App helps manage charging and discharging plans to reduce electricity costs.

5.1 Scheduled Periods

When enabled, the power station automatically charges and discharges according to set peak and off-peak electricity rate periods.

1. Turn on the power station and ensure it is connected to DJI Home App.
2. Make sure the power station and mobile phone are connected to Wi-Fi. Update device firmware to the latest version.
3. Run DJI Home App, tap [Settings Icon] at the top-right corner, and tap Energy Optimization > Scheduled Periods.
4. Set peak and off-peak electricity rate periods. During peak periods, the power station supplies power to connected appliances; during off-peak periods, it will be charged.

5.2 Grid-Tied ESS

A solar power system is required to use the Grid-Tied ESS function. The power station can be connected to the grid to maximize solar energy use and reduce electricity costs.

Grid-Tied functions are supported in some countries and regions. Visit https://www.dji.com/power-2000/faq for more details.

Getting Started

1. Connect the power station to a wall socket and tighten the screws on the AC input port.
• DO NOT connect to extension cords or sockets with aging wiring.
2. Install a smart meter (optional).
• Visit https://www.dji.com/power-2000/faq to view supported smart meter models.
• Refer to smart meter manuals for safe installation and usage. Installations should be completed by a qualified electrician.
• Consult an electrician or power company to determine the actual operating meter phase for app settings.
3. Before using the grid-tied function, submit a power grid connection request in compliance with local laws and regulations. Consult your local power company for details.

Grid-Tied Settings

1. Turn on the power station and ensure it is connected to DJI Home App.
2. Make sure the power station and mobile phone are connected to Wi-Fi. Update device firmware to the latest version.
3. Run DJI Home App, tap [Settings Icon] at the top-right corner, and tap Energy Optimization > Grid-Tied ESS.
4. Select the grid-tied mode:
   • Max Self-Consumption Mode: Ideal for households with solar systems and relatively stable electricity bills.
   • Time of Use (TOU) Mode: Ideal for households with a large difference between peak and off-peak rates and where a solar system is installed.

* Select Scheduled Periods if no solar power system is installed.

Both max self-consumption and TOU adjust charging and discharging based on household electricity usage, prioritizing solar power or power station energy to reduce grid consumption and costs. TOU mode further optimizes power usage based on electricity price schedules.

Completing Settings

1. Complete the settings in DJI Home App.
2. Sync the smart meter to the app and refer to the illustration for check box selection.

Important Notes for Grid-Tied Mode:

• When grid-tied, the output power of the power station will be 800 W and the max charging power will be 2200 W.
• UPS function can still be used in grid-tied mode, but total power consumption of connected devices should not exceed 1200 W.
• When disconnecting from the grid for outdoor or vehicle use, disable energy optimization settings for stable power output.

6 Appendix

6.1 Specifications

Visit https://www.dji.com/power-2000/specs for specifications.

6.2 Compatibility

Visit https://www.dji.com/power-2000/faq for information on compatible products.

6.3 Firmware Update

Using DJI Home App

A prompt will appear in the app when new firmware is available. Follow the in-app instructions to update. An internet connection is required.

Alternatively, in DJI Home App, tap [Settings Icon] at the top right corner, and tap Firmware Update > Update.

• Before updating, ensure the device has sufficient battery level and a stable network connection.
• Connect accessories like an expansion battery or super fast charger to update the firmware together.

Using DJI Assistant 2 (Power Series)

Ensure the computer is connected to the internet before firmware update. Follow these instructions:

1. Power off the device. Press and hold the AC button and the power button simultaneously until the USB-C icon blinks on the display screen.
2. Connect the computer to the designated USB-C port.
3. Launch DJI Assistant 2, select the product, and click the firmware update button.
4. Select the firmware version, read the prompts in DJI Assistant 2, and click update. Firmware will download and upload automatically.
5. The display screen will show the update progress. Wait for processing to complete. The device will restart automatically.

• DO NOT power off the device or disconnect it from the computer during a firmware update.
• If the firmware update fails, the display screen will show UPGD FAIL. Disconnect the device, press and hold the power button for five seconds to power off, and try again.

6.4 Log Export

1. Power off the device. Press and hold the AC button and the power button simultaneously until the USB-C icon blinks on the display screen.
2. Connect the computer to the designated USB-C port.
3. Run DJI Assistant 2, click Log Export, select the log, and save.
4. Restart the power station to resume normal use after completing log export.

6.5 Maintenance

1. For extended storage, discharge the power station to 60%. Storing at a high power level shortens battery cell life.
2. Store the power station in a cool, dry environment away from direct sunlight and potential water leaks.
3. DO NOT store the power station after fully discharging it, as this may cause over-discharge and irreparable damage to the battery cell.
4. Charge and discharge the power station once every 6 months to ensure battery performance: discharge to below 15%, power off for over two hours, then charge to 100% in Standard Recharge mode.
5. Clean ports with a clean, dry cloth. DO NOT use alcohol or flammable solvents.

6.6 Disposal

1. Dispose of the power station in accordance with local regulations for hazardous chemicals and battery recycling. DO NOT dispose of in regular waste containers.
2. Dispose of the power station in a suitable recycling container only after fully discharging it.
3. Power stations that are over-discharged, swollen, damaged, or leaky must be disposed of properly. Contact a professional battery disposal or recycling agent for assistance.