DJI Power 2000 User Manual

How to Use This User Manual

This document is protected by copyright by DJI. Unless DJI grants permission, you are not authorized to use or allow others to use this document or any part of it by reproducing, transmitting, or selling it. Refer to this document and its contents only as instructions for handling DJI products. The document may not be used for other purposes.

In case of discrepancies between different versions, the English version shall prevail.

Search for Keywords

Search for keywords such as "battery" and "install" to find a heading. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to search.

Navigate to a Topic

View a list of all topics in the table of contents. Click on a heading to read the content.

Print This Document

This document can be printed in high resolution.

Product Profile

DJI Power 2000

1. Power/Sleep Button: Press and hold the power button for at least two seconds to turn the power station on or off. Press the power button once to turn the display on or off when the power station is on.

2. Screen: Displays information about the power station's status.

3. AC Output Ports: [1] Ports for AC power output.

4. AC Output Button: Button to activate AC output.

5. AC Input Port: Port for AC power input.

6. Charging Mode Switch: Switch to select charging mode.

7. SDC Port: Port for SDC connections.

8. USB-A Ports: Ports for USB-A devices.

9. USB-C Ports: Ports for USB-C devices.

10. Vents: For ventilation.

[1] Illustrations in the user manual may differ from the actual product depending on the country or region. Refer to the actual product.

Screen

1. Remaining Battery Level: Displays the remaining battery percentage.

2. Time: Displays the remaining usage time when the power station is charging external devices. Displays the remaining time required to fully charge the power station from the current battery level when charging the power station. When the unit has both output and input simultaneously, the screen displays the required charging time if the output power is greater, or the remaining usage time if the input power is greater.

3. Battery Level Indicator: The battery level indicator blinks sequentially when the power station is charging. The last grid in the battery level field blinks when the power supply unit is charging external devices.

4. System Warnings:

• ERRBB: Error code.
• [Temperature Icon]: Temperature error. The icon lights up steadily if the temperature is too high or too low. Wait for the temperature to return to normal.
• OVERLOAD: Overload warning.

Check the warning messages in the DJI Home App or visit https://s.dji.com/DJI-Power to learn more about warning details and troubleshooting. Contact official support if the problem persists.

5. Fast Charging Mode: Charging power is higher and suitable for daily charging.

6. Standard Charging Mode: Charging power is lower and the operating noise is lower, which is suitable for charging at night.

7. Wi-Fi Connection Status: A solid icon indicates a successful Wi-Fi connection. A blinking icon indicates that Wi-Fi is not connected or unavailable.

8. USB-A Port

9. USB-C Port

10. AC Output Frequency: When the AC output frequency of the power supply unit differs from the mains frequency (e.g., when using the unit in different regions), only charging is supported, and the power supply unit cannot charge external devices. In this case, the screen will display an error code (ERR13 or ERR14). Press and hold the AC button for more than 10 seconds to switch the frequency and return to normal use.

11. SDC Port:

• [Charging Icon]: Charge the power supply unit or charge external devices.
• 88.88 V: Voltage value when the SDC port is used.
• 88.88 %: Battery level of the aircraft battery when the battery is charging.

12. Input Current

13. Uninterruptible Power Supply (UPS)

14. Output Power

Basic Operation

Powering On/Off

To turn on/off: Press and hold the power button for at least two seconds.

To turn the display on/off: When the power station is on, press the power button once.

Connecting to the DJI Home App

1. Scan the QR code to download the DJI Home App.
2. Activate Bluetooth and Wi-Fi on your phone, run the DJI Home App, and follow the instructions to connect the device.
   • You can check which Android and iOS operating system versions are supported by the app at https://www.dji.com/downloads/djiapp/dji-home.
   • The interface and functions in the app may vary as the software version is updated. Actual user experience depends on the software version used.

AC Charging

1. Open the port cover and connect the AC input port to an AC outlet.
2. Switch the charging mode selector to choose the charging mode.
   • [Fast Charging Icon] Fast Charging Mode: Charging power is higher and suitable for daily charging.
   • [Standard Charging Icon] Standard Charging Mode: Charging power is lower and the operating noise is lower, which is suitable for charging at night.

Important Notes:

• Use the original AC power cable for charging and avoid bending or pressing the cable. Ensure good ventilation during charging. DO NOT place the unit in high temperatures or confined spaces.
• Disconnect the AC outlet when charging is complete.
• It is recommended to use the standard charging mode for longer battery cell lifespan.
• If the power station is charged in Fast Charging mode for five consecutive cycles, it will automatically switch to Standard Charging mode after the sixth fast charge for battery maintenance.
• When the temperature is abnormal in Fast Charging mode, the temperature error icon [Temperature Icon] on the screen will blink slowly, and the actual charging power may be reduced to ensure battery cell lifespan and safety.

AC Output

Connect the external device to an AC output port and press the AC output button for AC power. The power supply unit will beep once, and the AC output button will blink slowly.

The AC output will automatically turn off if the power station does not power any AC device for more than 30 minutes. When the AC output is deactivated, the power supply unit will automatically turn off if it has no output or input for more than 60 minutes. AC Timeout and Device Timeout can be changed in the DJI Home App.

Press and hold the AC button for continuous AC power supply when connecting the power supply unit to devices that operate intermittently, such as a refrigerator. The power supply unit will beep once, and the AC button will show a solid light.

The internal electronic components have a waterproof coating. A slight odor may occur when using a lot of power. The odor will disappear on its own after the power station has been used for a while each day.

USB Output

Connect the external device to the USB-A or USB-C ports for power supply.

Accessories

Watch the video tutorials or read the accessory manuals to learn how to use the product.

Note: Accessories must be purchased separately unless otherwise stated.

SDC Output

The power station can also be used with other SDC cables to charge various devices via the SDC port.

Accessories for SDC Output:

1. Matrice 30 Series Fast Charging Cable
2. Air 3 Series Fast Charging Cable
3. Mavic 3 Series Fast Charging Cable
4. Inspire 3 Fast Charging Cable
5. Matrice 4 Series Fast Charging Cable
6. SDC to XT60 Power Cable (12 V)
7. SDC to Car Charger Plug Power Cable (12 V)

Standard Output Voltage: 13.6 V. Max Output Current: 10 A.

• Ensure that the external device is within the cable's output specifications.
• DO NOT connect directly to a lithium battery with an XT60 port using the SDC to XT60 power cable. Ensure the power station is connected to a balanced charger first.

Expand Capacity

The DJI Power Expansion Battery 2000 can be connected to the power supply unit to expand battery capacity.

To charge the expansion battery, connect it to the power supply unit and charge the power station.

Car Scenario

1. Car power outlet to SDC power adapter
2. 1kW Super Fast Car Charger
3. 1.8 kW Solar/Car Super Fast charger
4. 1.8kW Super Fast Charger 45A Charging Cable for car

Note: Ensure that the connected car's power supply is within the accessory's specifications. Otherwise, it may cause abnormal performance or even damage to the power supply unit.

Ensure that the car adapter is properly connected to the car's power port and that the car engine is started before charging.

Solar Scenario

Car power outlet to SDC power adapter

Solar Panel Adapter Module (MPPT)

Use the MC4 to XT60 cable when connecting to solar panels with MC4 ports.

1.8 kW Solar/Car Super Fast Charger

1. 1.8 kW Solar/Car Super Fast Charger

2. 1.8 kW Super Fast Charger XT90 to MC4 adapter cable

• It is recommended to use officially approved solar panels. DO NOT mix different types of solar panels. Ensure that the connected solar panels are within the adapter's specifications. Otherwise, the devices may be damaged.
• Up to three solar panels can be connected to the adapter module and used in parallel (cannot be used in series).
• The car's power outlet to SDC Power cable makes it possible to connect a solar panel for charging with solar energy.

Solar + RV Scenario

1. 1.8 kW Solar/Car Super Fast Charger
2. 1.8kW Super Fast Charger 45A Charging Cable for car

When multiple charging methods are used simultaneously, solar charging will be prioritized by default. The charging sequence can be adjusted in the DJI Home App: Tap in the upper right corner and tap Energy Management, enable Custom Reserve Level for backup and change the reserve level for backup. When the battery level is below the reserve level for backup, multiple charging methods can be used simultaneously. When the current battery level is above the reserve level for backup, only solar charging is available.

Uninterruptible Power Supply (UPS)

Connect the power station to an AC outlet and connect an external device, e.g., a computer, to the power station. Press the AC button once; UPS is activated if the [UPS Icon] symbol is displayed on the screen.

When the mains power is normal, the AC outlet supplies power to both the power supply unit and the connected device.

In the event of a sudden power outage, the power supply unit can automatically switch to power supply status, ensuring that the connected device remains in normal operation.

• The power station only supports the basic UPS function and does not support 0 ms switching. DO NOT connect the power supply unit to devices that require 0 ms UPS, such as medical equipment. Otherwise, it may lead to the device not functioning or data loss.
• This function is available in certain regions. Refer to local laws and regulations for more information.
• Due to restrictions under local laws and regulations in some countries and regions, the actual output power of the power supply unit may be reduced in UPS mode.

Appendix

Specifications

Visit the following website for specifications: https://www.dji.com/power-2000/specs

Compatibility

Visit the following websites for more information on compatible products: https://www.dji.com/power-2000/faq

Firmware Update

Using the DJI Home App

If the unit is connected to the DJI Home App, a prompt will appear in the app when new firmware is available. Follow the instructions in the app to update the firmware. An internet connection is required during firmware updates.

You can also update the firmware in the DJI Home App: tap [Menu Icon] in the upper right corner and tap Firmware Update > Update.

• Before updating, ensure the unit has sufficient battery level and a stable network connection.
• Connect accessories such as an expansion battery or a super fast charger to the power supply unit to update the firmware together.

Using DJI Assistant 2 (Power Series)

Ensure the computer is connected to the internet during the update. Follow the instructions below to ensure a firmware update:

1. Turn off the unit, press and hold the AC button and the power button simultaneously until the USB-C icon starts blinking on the screen.
2. Connect the computer to the designated USB-C port as shown in the image.
3. Start DJI Assistant 2, select the product, and click the update button on the left.
4. Select the firmware version, read the instructions in DJI Assistant 2 carefully, and click update. The firmware will be downloaded and uploaded to the unit automatically.
5. Firmware updates automatically, and the screen displays the update progress. Wait until the process is complete. The unit will restart automatically when the firmware update is complete.

Important:

• DO NOT turn off the unit or disconnect the unit from the computer during a firmware update.
• If the firmware update fails, UPGD FAIL will be displayed on the screen. Disconnect the unit from the computer and the AC outlet, press and hold the power button for five seconds to turn off the unit, and try again.

Log Export

1. Turn off the unit, press and hold the AC button and the power button simultaneously until the USB-C icon starts blinking on the screen.
2. Connect the computer to the designated USB-C port as shown in the image.
3. Run DJI Assistant 2, click Log Export on the left, select the log from the log list, and save. Wait for the export to complete.
4. Restart the power supply unit to return to normal use after the log export is complete.

Maintenance

1. If the power station needs to be stored for a long time, it is recommended to discharge the power station to 60%. Storage with a low power level can lead to over-discharge.
2. The power station should be stored in a cool and dry environment without direct sunlight at the specified storage temperature. DO NOT place the power station in water or where water may leak.
3. DO NOT store the power station completely discharged for a long time. Doing so can lead to battery discharge and cause irreparable damage to the battery cell.
4. Charge and discharge the power station once every six months to ensure battery performance: discharge the power station to under 15%, turn it off for more than two hours, and then charge it to 100% in standard charging mode.
5. Clean the ports with a clean, dry cloth if there are visible deposits. DO NOT clean the power station with alcohol or other flammable solvents.

Battery Disposal

1. The power station contains hazardous chemicals. Ensure to strictly follow local regulations for battery disposal and recycling. DO NOT dispose of the power station in a regular waste container.
2. Dispose of the power station in a suitable recycling container after it has been completely discharged.
3. Power stations that are overcharged, swollen, involved in a crash, have come into contact with liquid, are damaged, or are leaking must be disposed of properly. DO NOT use any power station in such condition to avoid damage. Contact a professional recycling or disposal agent for assistance.