VIVOTEK ND9326P/9426P NVR Quick Installation Guide

Model Numbers: ND9326P, ND9426P

Part Number: 5019035500

Safety Precautions

Warning Before Installation:

Keep the Network Video Recorder (NVR) away from water. If the NVR gets wet, power it off immediately.
Power off the NVR immediately if you detect abnormal smell or smoke coming from it.
Do not place the NVR near heat sources such as televisions or ovens.
Do not place the NVR in high humidity environments.
Avoid exposing the NVR to direct sunlight.
Do not attempt to remove or uninstall software from the mounted flash memory.
Do not drop the Network Camera (NVR).

General Warnings:

Do not connect the NVR's PoE ports to non-Powered Devices (non-PD), such as an Ethernet switch LAN port, as the Ethernet control circuits may not be compatible. A PD is a device designed to receive power from a PoE connection, like network cameras.

Package Contents

Verify the package contents. The hardware installation typically requires P head 6#-32 X 4 screws (12 pieces).

Hardware Installation Steps

Mounting the NVR: Secure the NVR using appropriate mounting hardware. Diagram 1 shows the NVR chassis with screw holes for mounting.
Hard Drive Installation:
- Diagram 2 illustrates connecting SATA data cables (x2) and SATA power cables (x1) to the hard drives.
- Install hard drives into the designated HDD bays (SATA1, SATA2) as shown in Diagram 7.
- Secure the hard drives within the NVR chassis using screws, as depicted in Diagram 3.
Connecting Cables:
- Connect SATA data and power cables to the installed hard drives (Diagram 4 and 5).
- Connect the NVR to a power source using the AC 100-240V, 50-60Hz input (Diagram 10).
Rear Panel Connections: Diagram 10 details the rear panel, which includes ports for LAN/WAN, multiple PoE LAN ports (e.g., #1~8 or #1~16), and USB 2.0 ports.
Initial Software Setup: After powering on, the system may guide you through an auto-setup or live view. Diagram 11 shows a software interface for camera discovery and setup, including an option to "Skip auto setup and start liveview". The interface may display discovered cameras with their IP addresses and MAC addresses.

Additional Information

Taiwan RoHS: For Taiwan RoHS related information, refer to the VIVOTEK website. Links provided are: https://www.vivotek.com/nd9326P and https://www.vivotek.com/nd9426P.
Warranty and RMA: For warranty and RMA service, please contact authorized distributors or visit https://www.vivotek.com/support/warranty-rma.
Third-Party Software: VIVOTEK does not provide warranty or technical support for third-party application software installed and run on the NVR.
Specifications: All specifications are subject to change without notice.

Contact Information

VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
T: +886-2-82455282 F: +886-2-82455532 E: sales@vivotek.com

VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T: +31 (0)20 800 3817 E: saleseurope@vivotek.com

VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
T: 408-773-8686 F: 408-773-8298 E: salesusa@vivotek.com

	VIVOTEK ND9326P/ND9426P Network Video Recorder User's Manual Comprehensive user's manual for VIVOTEK ND9326P and ND9426P Network Video Recorders. Covers hardware installation, initial configuration, local console management, web console management, and system settings. Details features like H.265 compression, PoE support, RAID configurations, and remote access via VORTEX Connect and VIVOCloud.
	VIVOTEK ND9442P/ND9542P NVR Quick Installation Guide This guide provides instructions for the hardware installation and initial setup of the VIVOTEK ND9442P and ND9542P Network Video Recorders (NVRs). It covers safety precautions, package contents, hardware mounting, connections, and basic system configuration.
	VIVOTEK ND9323P/ND9425P NVR Quick Installation Guide This guide provides instructions for the quick installation of the VIVOTEK ND9323P and ND9425P Network Video Recorders (NVRs). It covers hardware installation, including connecting hard drives and power, and basic setup procedures.
	VIVOTEK CC9381-HV Quick Installation Guide A concise guide for the installation of the VIVOTEK CC9381-HV network camera, covering hardware setup, mounting, and basic connection.
	VIVOTEK ND9323P/ND9425P Network Video Recorder User's Manual This user's manual provides comprehensive instructions for the VIVOTEK ND9323P and ND9425P Network Video Recorders. It covers hardware installation, initial configuration, local console management, web console management, and system settings. Learn about special features, safety precautions, and troubleshooting.
	VIVOTEK VAST Central Management Software: Features & Specifications Explore VIVOTEK's VAST Central Management Software, a comprehensive IP surveillance solution offering hierarchical management, advanced event handling, and scalable video wall capabilities for robust security systems.
	VAST Security Station User Manual User manual for VIVOTEK's VAST Security Station (VSS), detailing its features, installation, and operation for IP surveillance.
	VIVOTEK IB9360-H, IB9380-H Quick Installation Guide This document provides a quick installation guide for VIVOTEK IB9360-H and IB9380-H network cameras. It includes essential warnings, package contents, and detailed step-by-step hardware installation instructions with textual descriptions of diagrams. Note: The full document may be locked and require purchase.