Mcombo Wooden Dog Crate Furniture
Owner's Manual
Model: 6058-DOG-GC34
Welcome
Hello, Thank you for choosing Mcombo® Let's get started
PURCHASER'S AGREEMENT
By accepting delivery of this product, you promise that you will not change, alter, or modify this product or remove or render inoperable or unsafe any guards, shields or other safety features of this product. You will not refuse or neglect any retrofit kits that Mcombo may provide to enhance and preserve the safe use of this product.
I. PRODUCT PRECAUTIONS
- [Manual Icon] Read and follow the information in the user's manual.
- [Child Safety Icon] Please keep kids away from small components to ensure safety.
- [Ventilation Icon] Please ventilate before use.
- [Chew-Proof Warning Icon] Please note that the wood is not chew-proof.
- [Cleaning Reminder Icon] Please clean up water stains and pet excrement in time.
- [Weight Limit Icon] Do not place overweight items.
- [Proper Handling Icon] Please handle wood and other accessories properly.
II. DISCLAIMER
Make sure you read and understand this manual completely before using your Mcombo Product. Mcombo is not and cannot be held responsible for any damage or injury incurred due to improper or unsafe use of the Mcombo Product. Mcombo specifically disclaims responsibility for any bodily injury or property damage that may occur during any use that does not comply with applicable federal, state, or local laws or ordinances.
III. INSTALLATION PREPARATION
- Please prepare a carpet or mat to protect your floor. You need to spread out all the accessories.
- Please prepare a pair of gloves to avoid being scratched by sharp wooden sawdust that may occur during installation.
- Please open all the boxes to check that the accessories are complete and in good condition (The part list is on page 7 and 8).
- The box contains some small components; please place them properly before installation to keep them away from kids and ensure safety.
- If you need to use power tools to install this product, please set the speed to low speed in advance. Due to the characteristics of wood products, the use of high speed during installation is probably to damage the wood.
IV. ASSEMBLY INSTRUCTIONS
[Important Note Icon] Please read these instructions thoroughly before using.
[Contact Icon] Please contact Mcombo Customer Support (see page 23) immediately if anything is missing or damaged.
1. Product Parameters
| Specification | Description |
|---|---|
| Product Model No. | 6058-DOG-GC34 |
| Package Quantity | 2 |
| Overall Dimension | 42.50 * 23.60 * 29.10 inch |
| Package Contains | Wood Panels, Accessory Packs, Instructions |
2. Part List
Box 1
- Part 1: Wooden panel, 1080x600mm (x1)
- Part 4: Wooden panel, 1079x695mm (x1)
- Part 8: Wooden panel, 1080x600mm (x1)
Box 2
- Part 2: Two wooden side panels, 655x569mm (x2)
- Part 3: Three wooden panels with multiple holes, 100x40mm (x3)
- Part 5: Wooden panel with glass, 695x355mm (x1)
- Part 6: Wooden panel with glass, 695x355mm (x1)
- Part 7: Wooden panel, 369x85mm (x1)
- Part 9: Wooden panel, 400x195mm (x1)
- Part 10: Wooden panel, 400x195mm (x1)
- Part 11: Wooden panel, 570x194mm (x1)
- Part 12: Wooden panel, 570x194mm (x1)
- Part 13: Wooden panel with glass, 564x361mm (x1)
Kindly Note: 1. Please check the quantity of all parts before installing the product. 2. Please do not tighten the screws before completing all the installation steps. Q: Is there any broken or missing part? A: If yes, please feel free to contact Mcombo Customer Support (see page 23), Mcombo will do its best to assist you to solve the problem as soon as possible.
3. Hardware
- Hardware A: Screw, Ø6*35mm (x40+1)
- Hardware B: Cam lock, Ø15*12mm (x40+1)
- Hardware C: Dowel, Ø8*30mm (x26+1)
- Hardware D: Screw, Ø7*47mm (x22+1)
- Hardware E: Allen wrench, M4*64mm (x1)
- Hardware F: Connector, 27*10*19mm (x1)
- Hardware G: Screw, 3.5*14mm (x2+1)
- Hardware H: Hinge connector, 40*29*13mm (x1)
- Hardware I: Hinge connector, 40*29*13mm (x1)
- Hardware J: Lock mechanism with key (x1)
Kindly Note: 1. Please check the quantity of all parts before installing the product. 2. Please do not tighten the screws before completing all the installation steps. Q: Is there any broken or missing part? A: If yes, please feel free to contact Mcombo Customer Support (see page 23), Mcombo will do its best to assist you to solve the problem as soon as possible.
3. Assembly Steps
Step 1
Q: How to solve the hole misalignment? A: Please do not tighten all the screws until aligning all the holes.
[Important Note Icon] #A needs to be fully tightened.
Attach panels 1, 2, 4, 5, 6, 7, 8, 9 as shown in the diagram using hardware A and B. Ensure correct orientation of panels with pre-drilled holes.
- Part 1 (x1)
- Part 2 (x2)
- Part 4 (x1)
- Part 5 (x1)
- Part 6 (x1)
- Part 7 (x1)
- Part 8 (x1)
- Part 9 (x1)
- Hardware A (x40)
Step 2
How to use it?
Illustration showing how to insert and lock cam locks (B) into pre-drilled holes on panels, then securing them with screws (not shown in this step but implied for B).
Connect parts 3 to part 2 using hardware B.
- Part 3 (x2)
- Hardware B (x4)
Step 3
[Directional Note Icon] Pay attention to direction of Part 3.
Attach panels 2 to panel 4 using hardware C.
- Hardware C (x4)
Step 4
Attach panels 2 to panel 4 using hardware B.
- Hardware B (x6)
Step 5
[Peel Film Note Icon] Please peel the film off the glass.
Attach part 7 to part 3 using hardware B. Then, connect this assembly to part 5 and part 6 using hardware B.
- Part 3 (x1)
- Hardware B (x6)
Step 6
Connect parts 5 and 7 to panels 2 and 4. Attach parts 6 to panels 2 and 4. Use hardware C for these connections.
- Hardware C (x4)
Step 7
Attach parts 5, 6, and 7 to the main structure using hardware B.
- Hardware B (x6)
Step 8
Attach the base panel (Part 1) to the assembled structure using hardware C.
- Hardware C (x2)
Step 9
Secure the base panel (Part 1) to the structure using hardware B.
- Hardware B (x12)
Step 10
Attach the top panels (Part 8) to the main structure using hardware C.
- Hardware C (x8)
Step 11
Attach the top panels (Part 8) to the structure using hardware D and E.
- Hardware D (x12)
- Hardware E (x1)
Step 12
[Adjustment Note Icon] Please do not tighten it, it will adjust the height in step (15).
Install the lock mechanism (Part J) onto the door (Part 13) using hardware J.
- Part 13 (x1)
- Hardware J (x1)
Step 13
Attach shelves (Part 12) to side panels (Part 9) using hardware F and G.
- Part 12 (x1)
- Hardware F (x1)
- Hardware G (x2)
Step 14
Assemble side panels 11 and 12 with base panel 9. Then attach this assembly to the main structure using hardware B and D.
- Part 10 (x1)
- Part 11 (x1)
- Hardware B (x4)
- Hardware D (x4)
Step 15
[Height Consistency Note Icon] Pay attention to adjusting the height to keep it consistent.
Attach hinge connectors (Hardware H and I) to the door (Part 13) and the main body (Parts 9, 10, 11, 12) to prepare for door installation.
- Hardware H (x1)
- Hardware I (x1)
Step 16
Attach the assembled top section (Parts 10 and 11) to the main body using hardware C.
- Hardware C (x8)
Step 17
Secure the top section to the main body using hardware B.
- Hardware B (x2)
Step 18
[Drive Screws Note Icon] Drive the screws from the inside.
Attach the door (Part 13) to the main body using hardware D.
- Hardware D (x6)
Step 19
Assembly is now complete. Ensure all connections are secure.
V. WARRANTY
Notice
- For product beyond the limited manufacturer warranty period and scope, Mcombo® can also provide replacement service, but a basic charge will be charged according to the circumstances.
- The warranty only applies to Mcombo® products and does not include any accessories or enhancements.
- Warranties are only valid in the 48 contiguous United States and are contingent upon the consumer operating the product according to the corresponding instruction manual.
| Category | Warranty Period |
|---|---|
| Wood | 1 Year |
| Hardware | 6 months |
CONSUMER WARRANTY LIMITATIONS AND EXCLUSIONS
All warranties begin on the date of delivery. All warranties are to the original purchaser from Mcombo® ONLY.
- Mcombo® will replace the defective parts or send replacement product provided that the warranty parts have not been subjected to misuse, abuse or improper service by the consumer, for example, damage arising in consequence of negligence or improper operation.
- Exclusions also include components with damage caused by: Contamination, Abuse, misuse, accident, or negligence, Commercial use, or use other than normal, Improper operation, maintenance, or storage.
NOTE: Mcombo® will pay standard shipping rates on all warranted parts for the first year. Mcombo® can also sell you replacement parts for a discount price when your product is out of warranty policy.
VI. RETURN/REPLACEMENT POLICY
Notice
Why don't we recommend returning the item by yourself?
- Huge cost - UPS/FedEx oversize fee.
- Need you to take the box to UPS/FedEx facility.
Return/ Replacement Policy
Mcombo® We'll always do our best to take care of customers, and that's why Mcombo® offers a straightforward, hassle-free return policy. You have 30 days from the date of purchase to return any item purchased from Mcombo®. We accept the return of items that are in new or used condition, with all original packaging and other components included. Refunds will be issued in the original form of payment for the price of the item.
NOTE:
- Please keep the original packaging in case the product needs to be returned. If the original packaging is not available, the newly found packaging needs to meet the following size standard: UPS/FedEx packaging size standard: (width + height) * 2 + length < 128 inch.
- Please disassemble the product before you return it, otherwise there will be a huge cost as oversized and it could even exceed your order amount.
- Please do not purchase return label for a damaged/defective product by yourself.
- If you have any problem to return the product, please contact Mcombo Customer Support immediately; Mcombo® will do its best to help you with a reasonable solution.
VII. MCOMBO CUSTOMER SUPPORT
If for any reason, Mcombo® has fallen short of your expectations, or if you have any questions and suggestions, please refer to the following contact information. Mcombo® will do its best to work with you to make sure you are entirely satisfied.
- ✉️ sales@mcombo.com (Respond within 24 hours)
- ? 1-323-597-1109 (8:00 a.m.--4:00 p.m. Monday--Friday, TIME ZONE: PST)
Locations:
- ? DE: 2411 Bear Corbitt Rd STE 1, New Castle, DE, 19720, 1-302-268-8644
- ? CA: 2808 Vail Ave, Commerce, CA, 90040, 1-323-597-1109
- ? TN: 3980 PREMIER AVE, MEMPHIS, TN, 38118
